7 segment display

Introduction

The 7 segment plugin support two different chip types, the TM1637 (4 digits) and the MAX7219/21 (8 digits).

Hardware

    ESP            TM1637
    GPIO    <-->   CLK
    GPIO    <-->   DIO

    ESP            MAX7219
    GPIO    <-->   DIN
    GPIO    <-->   CLK
    GPIO    <-->   CS

    Power          chip
    3.3V*   <-->   VCC
    GND     <-->   GND
    
    *Many 7 segment displays state that they need 5V to operate but we have successfully powered them using 3.3V.

8 digit display

4 digit display

ESP Easy

Use the device tab on the ESP Easy web interface and create a new task by editing one of the available tasks. Select "Display - 7 segment". Available in testing at the moment. Settings are as follows.

TM1637

If you use the 4 digit chip (TM1637) you only need two gpios.

MAX7219

If you use the 8 digit chip (MAX7219) you need three gpios.

Commands

Command	Value	Extra information
play,<value>	1...3000	Plays the n-th track 1...3000 on SD-card in root folder. The track number is the physical order - not the order displayed in file explorer! (The track will be played once and then stopped.)
stop	-	Stops actual playing sound.
vol,<value>	1...30	Set volume level.
eq,<value>	0...5	Set the equalizer type (IS NOT SUPPORTED BY YX5300) 0=Normal 1=Pop 2=Rock 3=Jazz 4=Classic 5=Base