Dombo From Holland

Moderators: rtenklooster, Voyager, BertB, Stuntteam

Post Reply
Message
Author
Dylantje
Normal user
Posts: 255
Joined: 11 Oct 2015, 16:51

Dombo From Holland

#1 Post by Dylantje » 11 Oct 2015, 16:54

Hi there ..
I am not so smart with a ESP, only i try to do my best :-)

With Domoticz i can help a lot of people.. :D
So forgif me please.... :)
Top
rtenklooster
Normal user
Posts: 320
Joined: 15 Apr 2015, 14:17

Re: Dombo From Holland

#2 Post by rtenklooster » 21 Oct 2015, 23:55

Welcome Dylan. Have seen you elsewhere... Nodo domotica i think?
Richard - Groningen (NL) - Image
Top
Dylantje
Normal user
Posts: 255
Joined: 11 Oct 2015, 16:51

Re: Dombo From Holland

#3 Post by Dylantje » 22 Oct 2015, 08:17

Nodo?

Domoticz is my favorite hobby....
And i read the tweakers forum, where you help me.
Whit my first esp flash
Top
rtenklooster
Normal user
Posts: 320
Joined: 15 Apr 2015, 14:17

Re: Dombo From Holland

#4 Post by rtenklooster » 22 Oct 2015, 09:12

[quote="Dylantje"]Nodo?

Domoticz is my favorite hobby....
And i read the tweakers forum, where you help me.
Whit my first esp flash[/quote]
Ahh.. that's it :) Welcome again.. got it all working now?
Richard - Groningen (NL) - Image
Top
Dylantje
Normal user
Posts: 255
Joined: 11 Oct 2015, 16:51

Re: Dombo From Holland

#5 Post by Dylantje » 24 Oct 2015, 13:08

I run the version where you did help me with.
I will upgrade to the latest version....
And then i will try all the options..

Only time... is my problem..
Top
Dylantje
Normal user
Posts: 255
Joined: 11 Oct 2015, 16:51

Re: Dombo From Holland

#6 Post by Dylantje » 18 Jan 2016, 21:32

pffff

Did have work with my nodemcu for a hole day..[ did test a lot. ] a lot of fun .. ]
Did someting wrong....
Lost my esp, in my network..

No problem..
I did saved my setting in de IDE...

Only a bigger problem.
When i upload the good sketch...

My ESP is in a booting loop...
After 10 seconds he is rebooting. [ i think when i look in my router ]

Tryd a other esp nodemcu [ v0.9 and v1.0 ]
The sketch is uploading without errors......

Only no esp in my WiFi network, they all booting i gues..

When i try a new sketch the same problem..

Please...

Help ..
Top
Dylantje
Normal user
Posts: 255
Joined: 11 Oct 2015, 16:51

Re: Dombo From Holland

#7 Post by Dylantje » 18 Jan 2016, 21:48

Code: Select all

 ets Jan  8 2013,rst cause:4, boot mode:(3,4)

wdt reset
load 0x4010f000, len 1264, room 16 
tail 0
chksum 0x42
csum 0x42
~ld
ªU
INIT : Booting Build nr:48
WIFI : Connecting...
IP   : Static IP :192.168.5.101
INIT : I2C

 ets Jan  8 2013,rst cause:4, boot mode:(3,4)

wdt reset
load 0x4010f000, len 1264, room 16 
tail 0
chksum 0x42
csum 0x42
~ld
ªU
INIT : Booting Build nr:48
WIFI : Connecting...
IP   : Static IP :192.168.5.101
INIT : I2C

 ets Jan  8 2013,rst cause:4, boot mode:(3,4)

wdt reset
load 0x4010f000, len 1264, room 16 
tail 0
chksum 0x42
csum 0x42
~ld
ªU
INIT : Booting Build nr:48
WIFI : Connecting...
IP   : Static IP :192.168.5.101
INIT : I2C

 ets Jan  8 2013,rst cause:4, boot mode:(3,4)

wdt reset
load 0x4010f000, len 1264, room 16 
tail 0
chksum 0x42
csum 0x42
~ld
ªU
INIT : Booting Build nr:48
WIFI : Connecting...
IP   : Static IP :192.168.5.101
INIT : I2C

 ets Jan  8 2013,rst cause:4, boot mode:(3,4)

wdt reset
load 0x4010f000, len 1264, room 16 
tail 0
chksum 0x42
csum 0x42
~ld
ªU
INIT : Booting Build nr:48
WIFI : Connecting...
IP   : Static IP :192.168.5.101
INIT : I2C

 ets Jan  8 2013,rst cause:4, boot mode:(3,4)

wdt reset
load 0x4010f000, len 1264, room 16 
tail 0
chksum 0x42
csum 0x42
~ld
ªU
INIT : Booting Build nr:48
WIFI : Connecting...
IP   : Static IP :192.168.5.101
INIT : I2C

 ets Jan  8 2013,rst cause:4, boot mode:(3,4)

wdt reset
load 0x4010f000, len 1264, room 16 
tail 0
chksum 0x42
csum 0x42
~ld
ªU
INIT : Booting Build nr:48
WIFI : Connecting...
IP   : Static IP :192.168.5.101
INIT : I2C
Did read my monitor [ proud of myself.. ]

Booting all the time
Top
Post Reply

Return to “Introduce yourself”

Who is online

Users browsing this forum: No registered users and 2 guests