Hello,
First of all, thanks for all of this work, i enjoy the RFLINK for 4 years now, since the R48 version.
I was really happy when R50 was released as I thought it was able to recognize my LaCrosse sensor TX141TH-BV3, but seems not.
I sent some years ago the debug to include this device but i did not received feedback so i thought it was already included in the dev version during these past years.
So today, i updated to R50, but nothing about the LaCrosse sensor in the logs.
Here is an example of the debug when receiving a frame:
20;43;DEBUG;Pulses=511;Pulses(uSec)=2520,570,900,570,900,570,510,60,240,300,480,60,240,270,480,60,240,270,270,240,270,270,300,210,240,300,240,300,240,300,240,330,240,300,450,60,210,300,210,300,450,90,210,300,210,330,240,300,450,90,450,90,450,90,210,330,450,90,210,330,210,330,210,330,420,90,210,330,450,90,420,90,210,330,210,330,420,120,420,120,420,90,210,330,420,90,210,360,780,690,780,690,780,690,780,690,420,120,180,330,420,120,180,360,420,120,180,360,180,360,150,360,180,360,150,360,150,360,180,360,180,360,180,360,420,120,180,360,180,360,390,120,180,360,150,360,150,360,390,120,420,120,420,120,150,360,390,120,150,360,150,390,150,360,420,120,150,360,420,120,390,150,150,360,150,360,390,120,420,120,390,120,150,390,390,120,150,420,750,720,750,720,750,720,750,720,390,150,150,390,390,150,150,390,390,120,150,390,150,390,150,360,150,390,150,390,150,390,150,390,150,390,150,360,390,120,150,390,150,390,390,150,150,390,150,390,150,390,390,150,390,150,390,150,150,390,390,150,150,390,150,390,150,390,390,150,150,390,390,150,390,150,150,390,150,390,390,150,390,150,390,150,150,390,390,150,120,420,720,720,750,750,720,750,720,720,390,150,120,420,360,150,120,420,360,150,150,390,150,390,120,390,120,390,150,390,120,420,120,390,150,390,150,390,390,150,150,390,150,390,390,150,120,390,150,390,120,390,360,150,360,150,390,150,120,390,360,150,150,390,120,420,120,420,360,150,120,390,360,150,360,150,120,390,120,390,360,150,360,150,360,150,120,420,360,150,360,180,720,750,720,750,720,750,720,750,360,180,120,420,360,180,120,420,360,180,120,420,120,420,120,420,120,420,120,420,120,420,120,390,120,420,120,420,360,180,120,420,120,420,360,180,120,420,120,420,120,420,360,150,360,150,360,180,120,420,360,180,120,420,120,420,120,420,360,150,120,420,360,180,360,150,120,420,120,420,360,180,360,180,360,180,120,420,360,180,120,450,690,750,720,750,720,750,720,750,360,150,120,420,360,180,120,420,360,180,120,420,120,420,120,420,120,420,120,420,120,420,120,420,90,420,120,420,360,180,120,420,120,420,360,180,120,420,90,420,120,420,360,180,360,180,360,180,120,420,360,180,120,420,90;
The corresponding values for this frame are : TEMP 8.3° / HUM 69%
Can you confirm the device is not handle ?
Will it be possible to include it one day ?
Let me know if more debug is needed.
Thanks.
LaCrosse with TX141TH-BV3 sensor
Moderators: rtenklooster, Voyager, BertB, Stuntteam
Re: LaCrosse with TX141TH-BV3 sensor
TXT141-BV2 is supported, we are looking at the BV3..
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Re: LaCrosse with TX141TH-BV3 sensor
I just saw that R51 has the new Device: TX141-BV3.
But i upgraded but nothing more about this sensor in logs, seems not supported yet.
Another debug log :
20;3C;DEBUG;Pulses=511;Pulses(uSec)=870,600,480,60,300,240,510,30,240,300,480,60,210,300,240,300,240,300,240,300,270,270,210,300,210,300,300,240,210,330,450,60,210,330,210,330,450,60,210,330,180,330,450,90,210,330,450,90,180,330,210,330,420,120,180,360,180,330,210,330,180,330,420,90,180,330,180,330,180,330,180,330,180,330,420,90,420,120,420,120,180,360,180,390,750,690,780,690,780,690,780,720,420,120,150,360,390,150,150,360,390,120,150,360,180,360,150,360,150,360,150,360,150,360,150,360,150,360,150,360,420,120,150,390,150,360,420,150,150,390,150,360,390,120,150,390,390,120,150,360,150,360,390,150,150,390,150,360,150,390,150,360,390,150,150,390,150,390,150,390,150,390,150,390,390,150,390,150,390,150,150,390,150,420,750,720,750,720,750,720,750,720,390,150,150,390,390,150,120,390,360,150,150,390,150,420,120,390,150,390,150,390,120,390,150,390,150,390,120,390,360,150,150,390,120,390,390,150,150,390,120,390,360,150,150,390,390,150,120,420,120,420,360,150,120,420,120,420,120,420,120,390,360,150,120,420,120,390,120,420,120,420,120,390,360,180,360,180,360,180,120,390,120,450,720,750,720,750,720,750,720,750,360,180,120,420,360,180,120,420,360,180,120,420,120,420,120,420,120,420,120,420,120,420,120,420,120,420,120,420,360,180,120,420,120,420,360,180,120,420,90,420,360,180,120,420,330,180,120,420,90,420,360,180,90,420,120,420,90,420,90,420,360,180,90,420,120,420,120,420,120,420,90,420,330,180,330,180,360,180,120,420,330,210,690,780,690,780,690,780,690,780,330,180,90,420,330,180,90,420,330,180,90,450,90,420,90,420,90,420,90,420,90,420,90,420,90,420,90,420,330,180,90,420,90,420,330,180,90,450,90,420,330,180,90,420,330,180,90,420,90,450,330,210,90,420,90,450,90,450,90,420,330,180,90,450,90,420,90,420,90,450,90,420,330,180,330,180,330,210,90,420,90,480,690,780,690,780,690,780,690,780,330,210,90,420,330,180,90,450,330,180,90,450,90,450,90,420,90,450,90,450,90,420,90,420,90,450,90,420,330,180,90,450,90,450,330,180,90,420,90,450,330,210,90,450,330,180,90,450,90,420,330,180,90,450,90,450,90,420,90;
corresponding to 8.6° / 66% hum.
But i upgraded but nothing more about this sensor in logs, seems not supported yet.
Another debug log :
20;3C;DEBUG;Pulses=511;Pulses(uSec)=870,600,480,60,300,240,510,30,240,300,480,60,210,300,240,300,240,300,240,300,270,270,210,300,210,300,300,240,210,330,450,60,210,330,210,330,450,60,210,330,180,330,450,90,210,330,450,90,180,330,210,330,420,120,180,360,180,330,210,330,180,330,420,90,180,330,180,330,180,330,180,330,180,330,420,90,420,120,420,120,180,360,180,390,750,690,780,690,780,690,780,720,420,120,150,360,390,150,150,360,390,120,150,360,180,360,150,360,150,360,150,360,150,360,150,360,150,360,150,360,420,120,150,390,150,360,420,150,150,390,150,360,390,120,150,390,390,120,150,360,150,360,390,150,150,390,150,360,150,390,150,360,390,150,150,390,150,390,150,390,150,390,150,390,390,150,390,150,390,150,150,390,150,420,750,720,750,720,750,720,750,720,390,150,150,390,390,150,120,390,360,150,150,390,150,420,120,390,150,390,150,390,120,390,150,390,150,390,120,390,360,150,150,390,120,390,390,150,150,390,120,390,360,150,150,390,390,150,120,420,120,420,360,150,120,420,120,420,120,420,120,390,360,150,120,420,120,390,120,420,120,420,120,390,360,180,360,180,360,180,120,390,120,450,720,750,720,750,720,750,720,750,360,180,120,420,360,180,120,420,360,180,120,420,120,420,120,420,120,420,120,420,120,420,120,420,120,420,120,420,360,180,120,420,120,420,360,180,120,420,90,420,360,180,120,420,330,180,120,420,90,420,360,180,90,420,120,420,90,420,90,420,360,180,90,420,120,420,120,420,120,420,90,420,330,180,330,180,360,180,120,420,330,210,690,780,690,780,690,780,690,780,330,180,90,420,330,180,90,420,330,180,90,450,90,420,90,420,90,420,90,420,90,420,90,420,90,420,90,420,330,180,90,420,90,420,330,180,90,450,90,420,330,180,90,420,330,180,90,420,90,450,330,210,90,420,90,450,90,450,90,420,330,180,90,450,90,420,90,420,90,450,90,420,330,180,330,180,330,210,90,420,90,480,690,780,690,780,690,780,690,780,330,210,90,420,330,180,90,450,330,180,90,450,90,450,90,420,90,450,90,450,90,420,90,420,90,450,90,420,330,180,90,450,90,450,330,180,90,420,90,450,330,210,90,450,330,180,90,450,90,420,330,180,90,450,90,450,90,420,90;
corresponding to 8.6° / 66% hum.
Re: LaCrosse with TX141TH-BV3 sensor
So far the logs we have received indicate that there are some different flavors. More work is needed to get them all working.
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Re: LaCrosse with TX141TH-BV3 sensor
No problem, thanks for your work.
Again, if more logs are needed, tell me.
Again, if more logs are needed, tell me.
Who is online
Users browsing this forum: No registered users and 3 guests