So I was doing some searching in the forum to see if I could find anything on flashing the newer sonoff dual R3. Has anyone done it with one of these yet? Is this even possible?
https://www.amazon.com/Sonoff-Metering- ... 440&sr=8-2
Sonoff Dual R3
Moderators: grovkillen, Stuntteam, TD-er
Re: Sonoff Dual R3
I have such device on the table, here, just didn't get to the flashing part yet...
/Ton (PayPal.me)
Re: Sonoff Dual R3
I my current light/ceiling fan setups I have 2 sonoff basics mounted in each and I am looking to switch them to a dual relay that I can have ESPEasy on.
Re: Sonoff Dual R3
It's quite easy to open, didn't even have to use tools, just pressing with my thumb-nail in the seam worked for me
Details on how to flash are on Blakadder, it's just that they write about Tasmota, but for ESPEasy you just use the ESP32 Energy build using the .factory.bin file for the initial upload.
I haven't been able to test the involved power measuring plugin selecting the correct Serial configuration yet . (I was/am going to validate that, that's why the device is on my table... )
Details on how to flash are on Blakadder, it's just that they write about Tasmota, but for ESPEasy you just use the ESP32 Energy build using the .factory.bin file for the initial upload.
I haven't been able to test the involved power measuring plugin selecting the correct Serial configuration yet . (I was/am going to validate that, that's why the device is on my table... )
/Ton (PayPal.me)
Re: Sonoff Dual R3
Thanks for all that information. I think I am going to get me a couple of these to try out.
Who is online
Users browsing this forum: No registered users and 4 guests