reconnect Wifi to other AP
Posted: 05 Jun 2023, 13:15
Hi,
is there a possibility to reconnect a ESP to the other configured wifi AP?
I have per floor an AP, if the ESP loses (by whatever reason) the connection to it's floor-AP anoter one is normally also reachable. The ESP then is stuck to this, irregardless the other one would be available in the meantime again.
Some ESPs have only signal of about -85 to -90 to the (alternative, but stuck) AP while a -70 dBi AP would be available ...
I can see them also on clicking "Scan" , but I can not persuate it to connect to it.
Also rebooting the ESP does not help - the "Use Last Connected AP from RTC" is NOT checked in Advanced settings, but still the second AP is contacted and connected instead of the first one.
using latest mega-20230508 on Wemos D1, ESP01, ESP32
Thanks.
is there a possibility to reconnect a ESP to the other configured wifi AP?
I have per floor an AP, if the ESP loses (by whatever reason) the connection to it's floor-AP anoter one is normally also reachable. The ESP then is stuck to this, irregardless the other one would be available in the meantime again.
Some ESPs have only signal of about -85 to -90 to the (alternative, but stuck) AP while a -70 dBi AP would be available ...
I can see them also on clicking "Scan" , but I can not persuate it to connect to it.
Also rebooting the ESP does not help - the "Use Last Connected AP from RTC" is NOT checked in Advanced settings, but still the second AP is contacted and connected instead of the first one.
using latest mega-20230508 on Wemos D1, ESP01, ESP32
Thanks.