telldus In-/Outdoor Thermo-/hygrometer (313159)
Posted: 26 Oct 2022, 20:57
I'm running RFlink 48 on a mega connected to Home-assistant and it's been working beautifully! Today I bought a telldus In-/Outdoor Thermo-/hygrometer (313159) to monitor my freezer temperature but it's showing the wrong values.
After some searching I found another thread on the home-assistant forum (https://community.home-assistant.io/t/t ... ink/239318) where someone had the exact same problem. The solution seemed to be:
Is it possible to flash the new firmware from the Pi it's connected to or do I need to hook it up to my PC?
The log shows the same problem:
Code: Select all
2021-12-17 21:10:00 DEBUG (MainThread) [rflink.protocol] received data: 20;14;AlectoV3;ID=30c8
2021-12-17 21:10:00 DEBUG (MainThread) [rflink.protocol] received data: ;TEMP=80b3;BAT=OK;
2021-12-17 21:10:00 DEBUG (MainThread) [rflink.protocol] got packet: 20;14;AlectoV3;ID=30c8;TEMP=80b3;BAT=OK;
2021-12-17 21:10:00 DEBUG (MainThread) [rflink.protocol] decoded packet: {'node': 'gateway', 'protocol': 'alectov3', 'id': '30c8', 'temperature': -17.9, 'temperature_unit': '°C', 'battery': 'ok'}
2021-12-17 21:10:00 DEBUG (MainThread) [rflink.protocol] got event: {'id': 'alectov3_30c8_temp', 'sensor': 'temperature', 'value': -17.9, 'unit': '°C'}
2021-12-17 21:10:00 DEBUG (MainThread) [homeassistant.components.rflink] event of type sensor: {'id': 'alectov3_30c8_temp', 'sensor': 'temperature', 'value': -17.9, 'unit': '°C'}
2021-12-17 21:10:00 DEBUG (MainThread) [homeassistant.components.rflink] entity_ids: ['sensor.alectov3_30c8_temp']
2021-12-17 21:10:00 DEBUG (MainThread) [homeassistant.components.rflink] passing event to sensor.alectov3_30c8_temp
So I would love to get the same solution but I've tried emailing the creator since 2021 so I'm posting here now, does anyone have the firmware that works with alecto devices?I contacted the support and it´s a problem with Alecto devices using the same pulse as tellstick but coding temperature in a different way. The guys where wery helpful and provided me with a solution
Is it possible to flash the new firmware from the Pi it's connected to or do I need to hook it up to my PC?