Manage RFLink while on Domoticz
Posted: 03 Oct 2020, 21:35
Hello
one of my Somfy plugs has lost connection with RFLink. I suspect due to a bad antenna it missed a few commands, and is now past the allowed window of rolling codes.
I had that before. just set the rolling code for that device in RFLink back with 50, 100, 150, or similar, and with one of them it will.
But that means I have to stop the RasPi, disconnect, connect it to a PC, etc.
Not the end of the world, but a nuisance. I should be able to do that without leaving my desk.
Is it not possible to send RFLink commands, and read responses, directly on my Domoticz/RaspPi, either through Domotizs itself, or by setting a terminal on a tty device?
Thanks for any tips.
one of my Somfy plugs has lost connection with RFLink. I suspect due to a bad antenna it missed a few commands, and is now past the allowed window of rolling codes.
I had that before. just set the rolling code for that device in RFLink back with 50, 100, 150, or similar, and with one of them it will.
But that means I have to stop the RasPi, disconnect, connect it to a PC, etc.
Not the end of the world, but a nuisance. I should be able to do that without leaving my desk.
Is it not possible to send RFLink commands, and read responses, directly on my Domoticz/RaspPi, either through Domotizs itself, or by setting a terminal on a tty device?
Thanks for any tips.