Let's Control It

It seems that official Nexa outlets are not working. Actually it seems that they work on 433,88MHz. RFLink sees them as NewKaku but still they does not work. Futhermore a little white remote is working on different frequency than the more advanced timer remote.

https://www.clasohlson.com/se/Fj%C3%A4r ... -3/36-4602
https://www.nexa.se/vara-produkter/syst ... re/tmt-918

Here is some debugging data and images showing problems with requency...

10;RFUDEBUG=ON;
20;1A;DEBUG;Pulses=96;Pulses(uSec)=300,1080,270,1080,330,30,270,60,240,1080,270,1080,270,90,240,1110,270,90,240,1110,240,120,240,90,240,1110,240,1110,240,120,240,90,210,1140,240,120,240,1110,240,1110,210,120,240,1110,240,120,240,90,240,1110,240,1110,240,120,240,1110,210,150,210,120,240,1140,210,1110,210,120,210,120,210,1140,210,120,210,1140,210,1140,210,150,210,120,210,1140,210,120,210,1140,210,1140,210,150,210,120,210,1140,210,6990;
20;1B;NewKaku;ID=00b974da;SWITCH=3;CMD=ON;
20;1C;DEBUG;Pulses=102;Pulses(uSec)=270,60,270,1080,300,60,330,1020,270,1050,300,60,240,90,270,1110,240,1110,300,60,240,1110,270,90,270,1080,240,120,240,90,240,1110,240,1080,240,120,240,90,240,1110,240,90,240,1110,240,1110,240,120,240,1110,240,120,240,90,240,1110,240,1110,240,120,210,1140,210,150,210,120,240,1140,210,1140,240,120,240,120,210,1140,210,120,210,1140,210,1140,210,150,210,120,210,1140,240,120,210,1140,210,1140,210,120,210,120,210,1140,210,6990;
20;1D;NewKaku;ID=00b974da;SWITCH=3;CMD=ON;
20;1E;DEBUG;Pulses=104;Pulses(uSec)=420,90,240,90,330,1020,330,30,300,1050,330,1020,270,90,300,60,270,1080,270,1080,270,90,240,1110,330,30,240,1110,240,90,240,90,240,1110,240,1110,240,120,240,120,210,1140,240,120,240,1110,210,1140,240,120,240,1110,240,120,240,120,210,1140,240,1110,210,120,210,1110,210,150,210,120,210,1140,240,1110,210,120,210,120,210,1140,210,120,210,1140,210,1140,210,150,210,120,210,1140,210,120,210,1140,210,1140,210,150,180,150,210,1140,210,6990;
20;1F;NewKaku;ID=00b974da;SWITCH=3;CMD=ON;
20;20;DEBUG;Pulses=94;Pulses(uSec)=450,1020,270,90,300,30,240,1110,240,1110,240,120,240,1110,240,120,420,930,240,120,270,60,300,1050,270,1080,270,90,240,120,240,1110,240,90,240,1140,240,1110,270,90,240,1110,210,120,240,120,210,1140,240,1110,240,120,240,1140,210,120,240,120,210,1140,210,1140,240,120,240,120,210,1140,210,120,210,1140,240,1140,210,120,210,120,210,1140,210,120,210,1140,210,1140,210,150,210,120,210,1140,210,6990;
20;21;NewKaku;ID=00b974da;SWITCH=3;CMD=ON;
20;22;DEBUG;Pulses=88;Pulses(uSec)=300,1080,300,1050,270,90,240,1110,240,120,240,1080,270,90,240,90,240,1110,240,1110,240,120,240,120,210,1140,240,120,210,1110,240,1110,240,120,240,1110,240,120,240,120,210,1110,240,1110,210,120,240,1110,240,120,210,120,210,1140,210,1140,210,120,240,120,210,1140,240,120,210,1140,210,1140,210,120,210,120,210,1140,210,120,210,1140,210,1140,210,150,210,120,210,1140,210,6990;
20;23;NewKaku;ID=00b974da;SWITCH=3;CMD=ON;
20;24;DEBUG;Pulses=96;Pulses(uSec)=240,1080,420,930,300,60,270,60,240,1110,240,1110,330,30,240,1110,300,60,240,1080,240,90,270,90,240,1110,240,1110,270,90,270,60,240,1110,240,90,240,1110,240,1110,270,90,240,1110,240,120,240,120,240,1110,240,1110,240,120,210,1140,210,120,240,120,240,1140,240,1110,210,120,240,120,210,1140,240,120,240,1140,240,1110,210,120,240,120,210,1140,240,120,210,1140,240,1110,240,120,210,120,210,1140,210,6990;

20;09;QRFDEBUG=ON;
20;0A;DEBUG;Pulses=102;Pulses(uSec)=0a01082509030b22092409030902082508250903082509030825080408030825082408040704082608040826082508040726070407040726072508040726080407040726072607040704072607040726072607050704072607040726072607050704072607e9;

Has anybody got Nexa really working? Is there anything I can provide more to solve this issue?

I have Nexa outlets (EYCR-2300) working fine. Well, not really tested fully, but at least playing with them for a while without issues. I first used manual commands via serial terminal and then also tested with domoticz.
I have NEYCT-705 remote that I also used. RFlink was able to read it fine ("NewKaKu").

Using latest RFlink r48. My RF receiver model I don't remember, but it looks a lot like the SRX887. Transmitter is FS1000A.

I also noted differencies in the frequencies, but with cheap receivers a small difference only reduces the range. I use 17cm of wire as antenna.

Hi, I have a lot of Nexa products and they work fine:
- LGDR-3500
- WMR-2300
- WMR-3000
- WMR-1000
- LEST-701

These use NewKaku (I run Domoticz on a RPI3).

I control my outdoor lights through these on a daily basis and occasionally 1 light or so wasn't triggered, doesn't happen often though, perhaps 4 times every month or so.

Edit:
I don't have the switches you mention but these work fine(not Nexa though):
https://www.kjell.com/se/sortiment/el-v ... ack-p50813