Drayton digistat +2RF AKA British Gas Smart Linked Thermostat

[panos]

Hi all,
I have this thermostat that operates at 443MHz. It is not recognised by RFLink from what I understand.

On
405 915 1410
0000000000001210000001001001100100000011000000001000000110

Off
405 915 1410
0000000000001210000001001001100100000000000000001110000110

On

Code: Select all

20;24;DEBUG;Pulses=58;Pulses(uSec)=390,390,420,390,420,390,420,390,420,390,420,390,930,1410,930,390,420,390,420,390,420,900,420,390,930,390,420,900,900,390,420,900,420,390,420,390,420,390,900,900,420,390,420,390,420,390,420,390,900,390,420,390,420,390,420,900,900,390;
20;25;DEBUG;Pulses=58;Pulses(uSec)=360,420,420,390,420,420,390,390,420,390,420,390,900,1410,900,390,420,390,420,390,420,900,450,360,900,390,420,900,900,390,420,900,420,390,420,390,420,390,900,900,420,390,420,390,420,390,420,390,900,390,420,390,420,390,420,900,900,390;
20;26;DEBUG;Pulses=58;Pulses(uSec)=390,390,420,390,420,390,420,390,420,390,420,390,900,1410,900,390,450,360,420,390,420,900,420,390,900,390,420,900,900,390,420,900,420,390,420,390,420,390,900,900,420,390,420,390,420,390,420,390,900,390,420,390,420,390,420,900,900,390;

Off

Code: Select all

20;2D;DEBUG;Pulses=58;Pulses(uSec)=390,390,420,390,420,390,420,390,420,390,420,390,900,1410,900,390,390,390,420,390,420,900,420,390,900,390,390,900,900,390,390,900,420,390,420,390,420,390,420,390,420,390,420,390,420,390,420,390,900,900,900,390,420,390,420,900,900,390;
20;2E;DEBUG;Pulses=58;Pulses(uSec)=360,420,390,420,390,420,390,420,420,390,420,390,900,1410,900,420,390,420,420,420,420,900,420,420,900,390,420,900,930,390,420,900,420,390,420,420,420,390,420,420,420,390,420,420,390,420,420,390,930,870,900,390,420,390,420,900,900,390;
20;2F;DEBUG;Pulses=58;Pulses(uSec)=360,390,420,390,420,390,420,390,420,390,420,390,900,1410,900,390,420,390,420,390,420,900,390,390,900,420,390,900,900,390,420,900,420,390,420,390,420,390,420,390,420,390,450,360,420,390,420,390,900,900,900,390,420,390,420,900,900,390;

Is it possible to be supported?
Cheers