[SOLVED] ESP Easy Mega - InfluxDB works again with ESPEasy_v2.0.0-dev7_dev

Moderators: rtenklooster, Voyager, BertB, Stuntteam

Forum rules
You have entered the experimental forum, beware!!!
Post Reply
Message
Author
lukaszj
New user
Posts: 7
Joined: 22 Mar 2017, 14:14

[SOLVED] ESP Easy Mega - InfluxDB works again with ESPEasy_v2.0.0-dev7_dev

#1 Post by lukaszj » 22 Mar 2017, 14:21

I had an issue with not working InfluxDB write on dev-03, but I've upgraded to latest dev-07 - and it works!

The setup with Generic Advanced HTTP [TESTING] is here: http://imgur.com/a/RyjzU

The goal was to sent 3 different values form BME280 (Temp/Humi/Pressure)

So instead of complaining - I just wrote this to let you know that it works :)

krikk
Normal user
Posts: 118
Joined: 28 Feb 2017, 07:57
Location: Austria
Contact:

Re: [SOLVED] ESP Easy Mega - InfluxDB works again with ESPEasy_v2.0.0-dev7_dev

#2 Post by krikk » 22 Mar 2017, 19:09

good to hear that i am not the only one using that, influxdb + grafana still the best graphs :)

lukaszj
New user
Posts: 7
Joined: 22 Mar 2017, 14:14

Re: [SOLVED] ESP Easy Mega - InfluxDB works again with ESPEasy_v2.0.0-dev7_dev

#3 Post by lukaszj » 22 Mar 2017, 21:16

I would love to get the SDS011 under ESP Easy Mega. Currently we have only the Sharp dust sensor, and it is... crappy :) The SDS011 is managed via serial interface, commands are simple, documentation is quite good... And it produces very nice comparable results: https://goo.gl/LZdKSy (or just for results: http://weather.jokielowie.com/

Where can make the request?

krikk
Normal user
Posts: 118
Joined: 28 Feb 2017, 07:57
Location: Austria
Contact:

Re: [SOLVED] ESP Easy Mega - InfluxDB works again with ESPEasy_v2.0.0-dev7_dev

#4 Post by krikk » 23 Mar 2017, 12:57

there are already plugins for serial devices for example: https://github.com/letscontrolit/ESPEas ... _MHZ19.ino, so should be easy to adapt this code to your sensor, every pull request (or code in every form) is welcome.

lukaszj
New user
Posts: 7
Joined: 22 Mar 2017, 14:14

Re: [SOLVED] ESP Easy Mega - InfluxDB works again with ESPEasy_v2.0.0-dev7_dev

#5 Post by lukaszj » 23 Mar 2017, 13:20

Hmmm... this looks easy enough, although I'm not a programmer. Now I definitely need to get another SDS011 and Arduino IDE ^^. Thanks!

fbrors
New user
Posts: 3
Joined: 14 Apr 2018, 22:57

Re: [SOLVED] ESP Easy Mega - InfluxDB works again with ESPEasy_v2.0.0-dev7_dev

#6 Post by fbrors » 15 Apr 2018, 00:53

i can't verify your solution. please share your config.dat. "This file contains the ESP main configuration settings, except security data." (
https://www.letscontrolit.com/wiki/inde ... _interface )

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests