problem, code Blyss
Posted: 14 Mar 2016, 16:06
Hello,
I come to you because here I am ... more
My Installation!
Raspberry with Domoticz
Arduino Mega with RFLINK R39
I switches Blyss Ref: 582864 and micro receiver Blyss ref 582866
Following the return of the Arduino console.
20; 06; Blyss; ID = 364F; SWITCH = G1; CMD = ON;
20; 07; Blyss; ID = 364F; SWITCH = G1; CMD = OFF;
On the Arduino console, the following commands will work:
10; Blyss; 364F; G1; OFF;
10; Blyss; 364F; G1; ON;
Detection of a switch under Domoticz
62 RFLINK 0000364F 255 Unknown Light / Off Switch Blyss
After creation of an inter here is my log back
Sending RFLink: 10; Blyss; 00364f; ff, ON
Obviously this does not work.
Someone would have any idea.
Thank you.
Bonjour,
Je viens vers vous car là, je suis plus...
Mon Installation !
Raspberry avec Domoticz
Arduino Mega avec RFLINK R39
J'ai des interrupteurs Blyss Réf : 582864 et micro récepteur Blyss réf 582866
Ci-dessous le retour de la console Arduino.
20;06;Blyss;ID=364f;SWITCH=G1;CMD=ON;
20;07;Blyss;ID=364f;SWITCH=G1;CMD=OFF;
Sur la console Arduino, les commandes suivantes fonctionnent très bien :
10;Blyss;364f;G1;OFF;
10;Blyss;364f;G1;ON;
Détection d'un interrupteur sous Domoticz
62 RFLINK 0000364F 255 Unknown Light/Switch Blyss Off
Après création d'un inter voila mon retour de log
RFLink Sending: 10;Blyss;00364f;ff;ON
Évidemment cela ne fonctionne pas.
Quelqu'un aurait une idée.
Merci.
I come to you because here I am ... more
My Installation!
Raspberry with Domoticz
Arduino Mega with RFLINK R39
I switches Blyss Ref: 582864 and micro receiver Blyss ref 582866
Following the return of the Arduino console.
20; 06; Blyss; ID = 364F; SWITCH = G1; CMD = ON;
20; 07; Blyss; ID = 364F; SWITCH = G1; CMD = OFF;
On the Arduino console, the following commands will work:
10; Blyss; 364F; G1; OFF;
10; Blyss; 364F; G1; ON;
Detection of a switch under Domoticz
62 RFLINK 0000364F 255 Unknown Light / Off Switch Blyss
After creation of an inter here is my log back
Sending RFLink: 10; Blyss; 00364f; ff, ON
Obviously this does not work.
Someone would have any idea.
Thank you.
Bonjour,
Je viens vers vous car là, je suis plus...
Mon Installation !
Raspberry avec Domoticz
Arduino Mega avec RFLINK R39
J'ai des interrupteurs Blyss Réf : 582864 et micro récepteur Blyss réf 582866
Ci-dessous le retour de la console Arduino.
20;06;Blyss;ID=364f;SWITCH=G1;CMD=ON;
20;07;Blyss;ID=364f;SWITCH=G1;CMD=OFF;
Sur la console Arduino, les commandes suivantes fonctionnent très bien :
10;Blyss;364f;G1;OFF;
10;Blyss;364f;G1;ON;
Détection d'un interrupteur sous Domoticz
62 RFLINK 0000364F 255 Unknown Light/Switch Blyss Off
Après création d'un inter voila mon retour de log
RFLink Sending: 10;Blyss;00364f;ff;ON
Évidemment cela ne fonctionne pas.
Quelqu'un aurait une idée.
Merci.