Page 1 of 1
Leap build ? mega-20240229 (leap-build)
Posted: 29 Feb 2024, 21:15
by Rampler
Hi Experts,
am I correct that leap build is the last build before a big change?
regards Klaus
Re: Leap build ? mega-20240229 (leap-build)
Posted: 29 Feb 2024, 21:19
by Rampler
OK, 29.2 ==> Leap year, sorry for the stupid question ..
Re: Leap build ? mega-20240229 (leap-build)
Posted: 29 Feb 2024, 21:35
by TD-er
It's not stupid as I thought it was a nice play with words too
Re: Leap build ? mega-20240229 (leap-build)
Posted: 29 Feb 2024, 23:08
by uah007
It was updated and my room temperature sensor gradually increased by 5 degrees. I returned to the previous firmware, the temperature returned to normal. I didn’t change anything in the settings, I just uploaded the firmware.
The temperature sensor is 20 cm away from the module and hangs freely in the air.
step 1 ESP_Easy_mega_20231225_collection_C_ESP32_4M316k.bin ds18b20 20°C
step 2 ESP_Easy_mega_20240229_collection_C_ESP32_4M316k.bin ds18b20 25°C
step 3 ESP_Easy_mega_20231225_collection_C_ESP32_4M316k.bin ds18b20 20°C
Re: Leap build ? mega-20240229 (leap-build)
Posted: 29 Feb 2024, 23:31
by TD-er
That's extremely odd.
Not sure if I do have time before next Tuesday to look into this.
Re: Leap build ? mega-20240229 (leap-build)
Posted: 29 Feb 2024, 23:42
by uah007
Now I checked again, the situation repeated itself.
And then I checked it on another ESP32, to which 3 of the same sensors are connected and everything is fine on them. It turns out that the problem is in the sensor. But why he reacts this way to the new firmware is surprising.
Re: Leap build ? mega-20240229 (leap-build)
Posted: 01 Mar 2024, 00:48
by TD-er
Do you see in the sensor summary/stats that it is reported as being "Parasite Powered" ?