Where to find information for 868MHz and hardware support?
I can't find it on the site.
Where to find information for 868MHz and hardware support?
Moderators: rtenklooster, Voyager, BertB, Stuntteam
Re: Where to find information for 868MHz and hardware support?
http://www.nemcon.nl/blog2/devlist
scroll down to the 868 mhz section.
Support for additional devices is under preparation.
scroll down to the 868 mhz section.
Support for additional devices is under preparation.
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Re: Where to find information for 868MHz and hardware support?
If I remember well I did read somewhere that the firmware currently supports 868 MHz.
I therefore assumed that information about 868 MHz modules and wiring would be available, but info on 868 MHz supported devices would follow.
But I might have interpreted that incorrectly.
I therefore assumed that information about 868 MHz modules and wiring would be available, but info on 868 MHz supported devices would follow.
But I might have interpreted that incorrectly.
Re: Where to find information for 868MHz and hardware support?
The firmware does indeed support 868mhz and some devices can be received when you use for example an Aurel 868mhz receiver/transceiver.
There is a pin compatible version of the aurel rtx mid working on 868 mhz.
There is a pin compatible version of the aurel rtx mid working on 868 mhz.
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Re: Where to find information for 868MHz and hardware support?
Clear.
So that would be either 433MHz OR 868MHz supported on one gateway? (that would be a pity).
I have no use for 868MHz devices myself yet but it's good to know what is and is not possible.
So that would be either 433MHz OR 868MHz supported on one gateway? (that would be a pity).
I have no use for 868MHz devices myself yet but it's good to know what is and is not possible.
Re: Where to find information for 868MHz and hardware support?
Well.. that is an ASK/OOK module..
We are working on CC1100 and CC2500 support.. through SPI.. for 433, 868 and 2.4 ghz traffic.
There is always a way..
We are working on CC1100 and CC2500 support.. through SPI.. for 433, 868 and 2.4 ghz traffic.
There is always a way..
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Who is online
Users browsing this forum: No registered users and 1 guest