Hi there
this is my firt post, i used the search funktion but did not found anything regarding this device. I buyed a cheep Weatherstaion from Ebay, called Exelvan Wireless Weather Station. On the packing is written "Modell No. WH1281". Here are two pictures from it:
Frontside
Backside
I tryed to use the Windows debug software for flashing the RFLink device but received nothing. Other diveses are reachable.
Can i do anything to help you to implement theses TX in the software to use it later in Domoticz?
Best regards from Peter
Solved: Cheep China Weather Station
Moderators: rtenklooster, Voyager, BertB, Stuntteam
Re: Cheep China Weather Station
sorry, now i found the Datas, one click in the software was missing
20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R41;
10;version;
20;01;VER=1.1;REV=41;BUILD=03;
10;rfdebug=on;
20;02;RFDEBUG=ON;
20;03;DEBUG;Pulses=118;Pulses(uSec)=480,870,390,870,390,870,390,870,390,870,390,870,390,870,1380,870,390,870,1380,870,1380,870,1350,870,1380,870,390,870,1380,870,1380,870,1380,870,390,870,1350,870,1380,870,1380,870,1380,870,1380,870,390,870,390,870,1350,870,390,870,1380,870,1380,870,390,870,390,870,390,870,390,870,390,870,390,870,390,870,390,870,390,870,390,870,390,900,390,870,1380,870,390,870,390,870,1350,870,390,870,390,870,1380,870,1380,870,1350,870,1350,870,390,870,390,870,390,870,390,870,1380,870,1380,870,1350,870,1350,6990;
20;04;DEBUG;Pulses=46;Pulses(uSec)=450,840,360,840,360,840,360,840,360,870,1380,870,390,870,390,870,1380,870,390,870,390,870,1350,870,1380,870,1350,900,1350,870,390,870,390,870,390,870,390,870,1380,870,1380,870,1380,870,1380,6990;
20;05;DEBUG;Pulses=102;Pulses(uSec)=180,840,1290,840,1290,840,1290,810,1320,870,390,870,1380,870,1350,870,1380,870,390,870,1380,870,1380,870,1380,900,1350,870,1380,870,390,870,390,870,1380,870,390,870,1380,870,1350,870,390,870,390,870,390,870,390,870,390,870,390,870,390,870,390,870,390,870,390,870,390,870,390,870,1380,870,390,870,390,870,1380,870,390,870,390,870,1380,870,1350,870,1380,870,1350,870,390,870,390,870,390,870,390,870,1380,870,1380,870,1380,870,1380,6990;
20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R41;
10;version;
20;01;VER=1.1;REV=41;BUILD=03;
10;rfdebug=on;
20;02;RFDEBUG=ON;
20;03;DEBUG;Pulses=118;Pulses(uSec)=480,870,390,870,390,870,390,870,390,870,390,870,390,870,1380,870,390,870,1380,870,1380,870,1350,870,1380,870,390,870,1380,870,1380,870,1380,870,390,870,1350,870,1380,870,1380,870,1380,870,1380,870,390,870,390,870,1350,870,390,870,1380,870,1380,870,390,870,390,870,390,870,390,870,390,870,390,870,390,870,390,870,390,870,390,870,390,900,390,870,1380,870,390,870,390,870,1350,870,390,870,390,870,1380,870,1380,870,1350,870,1350,870,390,870,390,870,390,870,390,870,1380,870,1380,870,1350,870,1350,6990;
20;04;DEBUG;Pulses=46;Pulses(uSec)=450,840,360,840,360,840,360,840,360,870,1380,870,390,870,390,870,1380,870,390,870,390,870,1350,870,1380,870,1350,900,1350,870,390,870,390,870,390,870,390,870,1380,870,1380,870,1380,870,1380,6990;
20;05;DEBUG;Pulses=102;Pulses(uSec)=180,840,1290,840,1290,840,1290,810,1320,870,390,870,1380,870,1350,870,1380,870,390,870,1380,870,1380,870,1380,900,1350,870,1380,870,390,870,390,870,1380,870,390,870,1380,870,1350,870,390,870,390,870,390,870,390,870,390,870,390,870,390,870,390,870,390,870,390,870,390,870,390,870,1380,870,390,870,390,870,1380,870,390,870,390,870,1380,870,1350,870,1380,870,1350,870,390,870,390,870,390,870,390,870,1380,870,1380,870,1380,870,1380,6990;
Re: Cheep China Weather Station
I have send you an email. It seems a small change to rflink will be all that is needed.
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Re: Cheep China Weather Station
Thanks a lot for the verry fast response. All sensors are now reachable.
Many thanks
Peter
Many thanks
Peter
Who is online
Users browsing this forum: No registered users and 39 guests