A ma facing an issue for now 2 weeks.
I have this board, https://www.letscontrolit.com/wiki/ind ... le=ESP-01 I don't see any puya mark on it.
I triyed to flash it with esptool and firmware r120. everything seems ok but unable to see ssid ESP_0 or ESP_Easy_0. So I tired to add the network ssid into my iphone or windows pc but same issue
Code: Select all
Uploading 411264 bytes from ESPEasy_R120_4096.bin to flash at 0x00000000
erasing flash
size: 064680 address: 000000
first_sector_index: 0
total_sector_count: 101
head_sector_count: 16
adjusted_sector_count: 85
adjusted_size: 055000
espcomm_send_command: sending command header
espcomm_send_command: sending command payload
setting serial port timeouts to 10000 ms
setting serial port timeouts to 1000 ms
espcomm_send_command: receiving 2 bytes of data
writing flash
..................................................................................................................................................................................................................................................................................................................................................................................................................
starting app without reboot
espcomm_send_command: sending command header
espcomm_send_command: sending command payload
espcomm_send_command: receiving 2 bytes of data
closing bootloader
flush start
setting serial port timeouts to 1 ms
setting serial port timeouts to 1000 ms
flush complete
Code: Select all
[10/02/2024 10:46:55] trying to connect
[10/02/2024 10:46:55] flush start
[10/02/2024 10:46:55] setting serial port timeouts to 1 ms
[10/02/2024 10:46:55] setting serial port timeouts to 1000 ms
[10/02/2024 10:46:55] flush complete
[10/02/2024 10:46:55] espcomm_send_command: sending command header
[10/02/2024 10:46:55] espcomm_send_command: sending command payload
[10/02/2024 10:46:55] espcomm_send_command: receiving 2 bytes of data
[10/02/2024 10:46:55] espcomm_send_command: receiving 2 bytes of data
[10/02/2024 10:46:55] espcomm_send_command: receiving 2 bytes of data
[10/02/2024 10:46:55] espcomm_send_command: receiving 2 bytes of data
[10/02/2024 10:46:55] espcomm_send_command: receiving 2 bytes of data
[10/02/2024 10:46:55] espcomm_send_command: receiving 2 bytes of data
[10/02/2024 10:46:55] espcomm_send_command: receiving 2 bytes of data
[10/02/2024 10:46:55] espcomm_send_command: receiving 2 bytes of data
[10/02/2024 10:46:55] Uploading 1004992 bytes from C:\Users\Audrey\Documents\ESPFlasher\bin\ESP_Easy_mega_20231225_normal_ESP8266_4M1M.bin to flash at 0x00000000
[10/02/2024 10:46:55] erasing flash
[10/02/2024 10:46:55] size: 0f55c0 address: 000000
[10/02/2024 10:46:55] first_sector_index: 0
[10/02/2024 10:46:55] total_sector_count: 246
[10/02/2024 10:46:55] head_sector_count: 16
[10/02/2024 10:46:55] adjusted_sector_count: 230
[10/02/2024 10:46:55] erase_size: 0e6000
[10/02/2024 10:46:55] espcomm_send_command: sending command header
[10/02/2024 10:46:55] espcomm_send_command: sending command payload
[10/02/2024 10:46:55] setting serial port timeouts to 15000 ms
[10/02/2024 10:46:55] setting serial port timeouts to 1000 ms
[10/02/2024 10:46:55] espcomm_send_command: receiving 2 bytes of data
[10/02/2024 10:46:55] writing flash
[10/02/2024 10:47:04] ................................................................................ [ 8% ]
[10/02/2024 10:47:13] ................................................................................ [ 16% ]
[10/02/2024 10:47:21] ................................................................................ [ 24% ]
[10/02/2024 10:47:30] ................................................................................ [ 32% ]
[10/02/2024 10:47:38] ................................................................................ [ 40% ]
[10/02/2024 10:47:47] ................................................................................ [ 48% ]
[10/02/2024 10:47:56] ................................................................................ [ 57% ]
[10/02/2024 10:48:04] ................................................................................ [ 65% ]
[10/02/2024 10:48:13] ................................................................................ [ 73% ]
[10/02/2024 10:48:22] ................................................................................ [ 81% ]
[10/02/2024 10:48:30] ................................................................................ [ 89% ]
[10/02/2024 10:48:39] ................................................................................ [ 97% ]
[10/02/2024 10:48:41] ...................... [ 100% ]
[10/02/2024 10:48:41] starting app without reboot
[10/02/2024 10:48:41] espcomm_send_command: sending command header
[10/02/2024 10:48:41] espcomm_send_command: sending command payload
[10/02/2024 10:48:41] espcomm_send_command: receiving 2 bytes of data
[10/02/2024 10:48:41] closing bootloader
[10/02/2024 10:48:41] flush start
[10/02/2024 10:48:41] setting serial port timeouts to 1 ms
[10/02/2024 10:48:41] setting serial port timeouts to 1000 ms
[10/02/2024 10:48:41] flush complete
[2024-02-10 10:48:41] DONE!
######POST FLASH######
[2024-02-10 10:48:43] Sending SERIAL: "..."
[2024-02-10 10:48:56] Sending SERIAL: " Name R6 "
[2024-02-10 10:49:53] Sending SERIAL: " Password 151200 "
[2024-02-10 10:51:06] Sending SERIAL: " WifiSSID INT35 "
[2024-02-10 10:51:38] Sending SERIAL: " WifiKey FC3D71E49E3xxxxxxxxxx36719671F "
[2024-02-10 10:52:17] Sending SERIAL: " ip 192.168.1.166 "
[2024-02-10 10:52:58] Sending SERIAL: " gateway 192.168.1.1 "
[2024-02-10 10:53:01] Sending SERIAL: " dns 8.8.8.8 "
[2024-02-10 10:53:28] Sending SERIAL: " subnet 255.255.255.0 "
[2024-02-10 10:53:53] Sending SERIAL: "Save"
[2024-02-10 10:54:14] Sending SERIAL: "WifiConnect"
[2024-02-10 10:54:14] Serial programming done.
[2024-02-10 10:54:28] ERROR: Unit do not have an IP address.
############################
[2024-02-10 10:54:28] JOB COMPLETED, over and out!
So I tried without setting anything:
Code: Select all
[10/02/2024 10:29:13] Uploading 1004992 bytes from C:\Users\Audrey\Documents\ESPFlasher\bin\ESP_Easy_mega_20231225_normal_ESP8266_4M1M.bin to flash at 0x00000000
[10/02/2024 10:29:13] erasing flash
[10/02/2024 10:29:13] size: 0f55c0 address: 000000
[10/02/2024 10:29:13] first_sector_index: 0
[10/02/2024 10:29:13] total_sector_count: 246
[10/02/2024 10:29:13] head_sector_count: 16
[10/02/2024 10:29:13] adjusted_sector_count: 230
[10/02/2024 10:29:13] erase_size: 0e6000
[10/02/2024 10:29:13] espcomm_send_command: sending command header
[10/02/2024 10:29:13] espcomm_send_command: sending command payload
[10/02/2024 10:29:13] setting serial port timeouts to 15000 ms
[10/02/2024 10:29:13] setting serial port timeouts to 1000 ms
[10/02/2024 10:29:13] espcomm_send_command: receiving 2 bytes of data
[10/02/2024 10:29:13] writing flash
[10/02/2024 10:29:21] ................................................................................ [ 8% ]
[10/02/2024 10:29:30] ................................................................................ [ 16% ]
[10/02/2024 10:29:39] ................................................................................ [ 24% ]
[10/02/2024 10:29:47] ................................................................................ [ 32% ]
[10/02/2024 10:29:56] ................................................................................ [ 40% ]
[10/02/2024 10:30:05] ................................................................................ [ 48% ]
[10/02/2024 10:30:13] ................................................................................ [ 57% ]
[10/02/2024 10:30:22] ................................................................................ [ 65% ]
[10/02/2024 10:30:31] ................................................................................ [ 73% ]
[10/02/2024 10:30:39] ................................................................................ [ 81% ]
[10/02/2024 10:30:48] ................................................................................ [ 89% ]
[10/02/2024 10:30:57] ................................................................................ [ 97% ]
[10/02/2024 10:30:59] ...................... [ 100% ]
[10/02/2024 10:30:59] starting app without reboot
[10/02/2024 10:30:59] espcomm_send_command: sending command header
[10/02/2024 10:30:59] espcomm_send_command: sending command payload
[10/02/2024 10:30:59] espcomm_send_command: receiving 2 bytes of data
[10/02/2024 10:30:59] closing bootloader
[10/02/2024 10:30:59] flush start
[10/02/2024 10:30:59] setting serial port timeouts to 1 ms
[10/02/2024 10:30:59] setting serial port timeouts to 1000 ms
[10/02/2024 10:30:59] flush complete
[2024-02-10 10:30:59] DONE!
############################
[2024-02-10 10:30:59] The COM port was already in use... the post-flash did not complete.
[2024-02-10 10:30:59] JOB COMPLETED, over and out!
Thanks in advance for your help
If you have any clue