I have installed ESPEasy_test_C_ESP8266_4M1M on D1 Mini, but under Tasks i cannot find the device "Heating - DL-Bus (Technische Alternative)".
It should be the right version. (Test C)
What I am doing wrong?
BR
Max
Heating - DL-Bus (Technische Alternative) not found
Moderators: grovkillen, Stuntteam, TD-er
Re: Heating - DL-Bus (Technische Alternative) not found
It is indeed mentioned in the "Testing C" build, but the "Limit build size" disables it.
So it is (sadly) correct that it is not present in that build.
I will make it available in the next build.
I will try if it will fit in either the "testing C" or "energy" build.
So it is (sadly) correct that it is not present in that build.
I will make it available in the next build.
I will try if it will fit in either the "testing C" or "energy" build.
Re: Heating - DL-Bus (Technische Alternative) not found
Made a build where it should be included: https://www.dropbox.com/s/63cdwhnty6olr ... M.bin?dl=0
Re: Heating - DL-Bus (Technische Alternative) not found
I was also looking at this, but you already got this, so I won't PR anything. Unless you want me to
/Ton (PayPal.me)
Re: Heating - DL-Bus (Technische Alternative) not found
Well you made the split, so I guess you're the perfect man for the job
Re: Heating - DL-Bus (Technische Alternative) not found
Thanks a lot. I flashed it now and the device is available
I hope it works with the UVR1611. I'll tell you later
BR
Max
I hope it works with the UVR1611. I'll tell you later
BR
Max
-
- New user
- Posts: 4
- Joined: 09 Feb 2024, 08:42
Re: Heating - DL-Bus (Technische Alternative) not found
Hi all,
does the ESPEasy DL-Bus plugin also support the master device functionality for the Cora DL-bus, i.e. is it possible to directly connect a DL-bus sensor device like the TA Fristar 3 WP to ESPEasy. With "direct connect" I mean without using a TA UVRxy and/or TA CMI.
I want to connect my TA Fristar 3 WP to my smart home system using espeasy in order to read/wrote cora-dl bus variables.
does the ESPEasy DL-Bus plugin also support the master device functionality for the Cora DL-bus, i.e. is it possible to directly connect a DL-bus sensor device like the TA Fristar 3 WP to ESPEasy. With "direct connect" I mean without using a TA UVRxy and/or TA CMI.
I want to connect my TA Fristar 3 WP to my smart home system using espeasy in order to read/wrote cora-dl bus variables.
Who is online
Users browsing this forum: No registered users and 1 guest