I am a new user of ESPEasy.
I use Home Assistant with MQTT Broker. Zigbee2Mqtt works with the broker.
Now I want to use the DHT11 sensor with ESP8266.
The values of the sensor are displayed under Device.
I have set "Send to Controller" to Enable.
However, the controller only sends the sensor values without setting the topic in front.
MQTT Settings:
Here is a log from the MQTT Broker:
Using version mega-20230623 on a Wemos D1.{"battery":100,"illuminance":27458,"illuminance_lux":557,"led_indication":null,"linkquality":0,"motion_sensitivity":"low","occupancy":false,"occupancy_timeout":0,"temperature":25.11}
27.30
73.50
{"Time":"2023-08-16T15:55:40","Uptime":"0T00:11:11","UptimeSec":671,"Heap":25,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"POWER":"ON","Wifi":{"AP":1,"SSId":"Garten_Fritz","BSSId":"3C:37:12:1E:E0:17","Channel":3,"Mode":"11n","RSSI":50,"Signal":-75,"LinkCount":1,"Downtime":"0T00:00:06"}}
27.30
73.50
27.30
73.50
Thank you