RFLink RF Module defect?

[lecolit]

Hello,

I used the RFLink 433.92Mhz for few years now, but it suddenly stopped working.
Did a reset, flashed the firmware again, reset eeprom etc.

20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R48;
10;version;
20;01;VER=1.1;REV=48;BUILD=04;
10;status;
20;02;STATUS;setRF433=ON;setNodoNRF=OFF;setMilight=OFF;setLivingColors=OFF;setAnsluta=OFF;setGPIO=OFF;setBLE=OFF;setMysensors=OFF;
10;rfdebug=on;
20;03;RFDEBUG=ON;
10;rfudebug=on;
20;04;RFUDEBUG=ON;
10;PING;
20;05;PONG;

The problem is when sending a KAKU command from my remote nothing shows up in the log.

But the PING reacts with a PONG. Not clear to me if the PING is actual sending something out through RF and receiving it (PONG).

Could this mean the RF Unit has died?

[Stuntteam]

The ping/pong part is used by controlling software (domoticz/HA) to check if the RFLink is still alive.
It does not say anything about the RF module itself.

[lecolit]

I replaced the RFLink part and it's working again!