Hello,
I have a Phenix remote crontrol with 4 power plugs.
The remote is configured like this (DIPs): 1: UP, 2: down, 3: down, 4: down, 5: down
To switch ON my B power plug, I push the buton B ON, in rflink I get : 20;54;AB400D;ID=42;SWITCH=02;CMD=ON;
Now I want to do the same but from Rflink. I send this: 10;AB400D;000042;02;ON;
I receive "20;56;OK;" but my power plug doesn't switch ON.
Which command do I have to send ? I can't understand how is it working.
Thanks a lot
Phenix remote control, how to use ?
Moderators: rtenklooster, Voyager, BertB, Stuntteam
Re: Phenix remote control, how to use ?
Are you sure that the command 10;AB400D;000042;02;ON is correct? Is the any manual or tutorial that you're following?
-
- New user
- Posts: 6
- Joined: 18 Jul 2019, 22:41
Re: Phenix remote control, how to use ?
I'm not 100% sure of the command.
I've read the documentation and according to me it's correct but maybe not
I've read the documentation and according to me it's correct but maybe not
Re: Phenix remote control, how to use ?
I have no idea what the dipswitches are reflecting.
I have tested with commands like:
10;AB400D;00004d;1;OFF;
10;AB400D;00004d;1;ON;
Where 4D is the hexadecimal value of a ascii character which is supposedly set with your dip switches
So I guess:
10;AB400D;000042;2;ON;
10;AB400D;000042;2;OFF;
I have tested with commands like:
10;AB400D;00004d;1;OFF;
10;AB400D;00004d;1;ON;
Where 4D is the hexadecimal value of a ascii character which is supposedly set with your dip switches
So I guess:
10;AB400D;000042;2;ON;
10;AB400D;000042;2;OFF;
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
-
- New user
- Posts: 6
- Joined: 18 Jul 2019, 22:41
Re: Phenix remote control, how to use ?
It's not working
Re: Phenix remote control, how to use ?
It is a Phenix (not a real AB400), Is it the YC-4000 model (using HX2262 chipset) ?
Alternatively you could try the rffind option.. (https://www.rflink.nl/faq.php#RFFind)
Alternatively you could try the rffind option.. (https://www.rflink.nl/faq.php#RFFind)
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8
-
- New user
- Posts: 6
- Joined: 18 Jul 2019, 22:41
Re: Phenix remote control, how to use ?
Yes, it's written YC-4000B on the back of the remote control
Who is online
Users browsing this forum: No registered users and 0 guests