Phenix remote control, how to use ?

Moderators: rtenklooster, Voyager, BertB, Stuntteam

Post Reply
Message
Author
beavis6511
New user
Posts: 6
Joined: 18 Jul 2019, 22:41

Phenix remote control, how to use ?

#1 Post by beavis6511 » 12 Feb 2023, 17:55

Hello,

I have a Phenix remote crontrol with 4 power plugs.

The remote is configured like this (DIPs): 1: UP, 2: down, 3: down, 4: down, 5: down

To switch ON my B power plug, I push the buton B ON, in rflink I get : 20;54;AB400D;ID=42;SWITCH=02;CMD=ON;

Now I want to do the same but from Rflink. I send this: 10;AB400D;000042;02;ON;
I receive "20;56;OK;" but my power plug doesn't switch ON.

Which command do I have to send ? I can't understand how is it working.

Thanks a lot :)

bidrohini
Normal user
Posts: 101
Joined: 03 Nov 2022, 16:24

Re: Phenix remote control, how to use ?

#2 Post by bidrohini » 13 Feb 2023, 10:08

Are you sure that the command 10;AB400D;000042;02;ON is correct? Is the any manual or tutorial that you're following?

beavis6511
New user
Posts: 6
Joined: 18 Jul 2019, 22:41

Re: Phenix remote control, how to use ?

#3 Post by beavis6511 » 13 Feb 2023, 10:45

I'm not 100% sure of the command.
I've read the documentation and according to me it's correct but maybe not

User avatar
Stuntteam
Site Beheer
Posts: 786
Joined: 27 Jan 2016, 16:46

Re: Phenix remote control, how to use ?

#4 Post by Stuntteam » 13 Feb 2023, 11:02

I have no idea what the dipswitches are reflecting.
I have tested with commands like:
10;AB400D;00004d;1;OFF;
10;AB400D;00004d;1;ON;

Where 4D is the hexadecimal value of a ascii character which is supposedly set with your dip switches
So I guess:
10;AB400D;000042;2;ON;
10;AB400D;000042;2;OFF;
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

beavis6511
New user
Posts: 6
Joined: 18 Jul 2019, 22:41

Re: Phenix remote control, how to use ?

#5 Post by beavis6511 » 13 Feb 2023, 11:40

It's not working :(

User avatar
Stuntteam
Site Beheer
Posts: 786
Joined: 27 Jan 2016, 16:46

Re: Phenix remote control, how to use ?

#6 Post by Stuntteam » 13 Feb 2023, 12:12

It is a Phenix (not a real AB400), Is it the YC-4000 model (using HX2262 chipset) ?
Alternatively you could try the rffind option.. (https://www.rflink.nl/faq.php#RFFind)
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

beavis6511
New user
Posts: 6
Joined: 18 Jul 2019, 22:41

Re: Phenix remote control, how to use ?

#7 Post by beavis6511 » 13 Feb 2023, 12:21

Yes, it's written YC-4000B on the back of the remote control

Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests