maybe I got that completely wrong?
I have two S20 with the completely identical firmware (20230114-1m-vcc).
From the running system (the one with the temperature control) I downloaded the configuration via "Tools/Save", renamed this file to "config.dat" and imported it into a freshly flashed S20 (blank and 20230114-1m-vcc).
The S20 then makes a boot loop with the import and sends the following over and over again on the TTY:
Code: Select all
ªU281 : Info : WIFI : Set WiFi to AP+STA
5054 : Info : WIFI : Set WiFi to OFF
5270 : Info :
INIT : Booting version: ESP_Easy_mega_20230114_normal_ESP8266_1M_VCC, (GitHub Actions) HEAD_773c087 (ESP82xx Core 2843a5ac, NONOS SDK 2.2.2-dev(38a443e)
ets Jan 8 2013,rst cause:1, boot mode:(3,6)
load 0x4010f000, len 3584, room 16
tail 0
chksum 0xb0
csum 0xb0
v2843a5ac
~ld
What I'm doing wrong? Or isn't that useable to transfer a config from one to an other identical device?