I'm looking for a solution to read the values of my kamstrup multical 601 heating. I bought a sensor on a Danish site
(https://wiki.hal9k.dk/projects/kamstrup) and try the ESP-easy (test)script for the kamstrup 401:
https://github.com/chipsi007/ESPEasyPlu ... a95a012072
This isn't working. I get:
Code: Select all
EVENT: Kamstrup_601#Heat=0.00
EVENT: Kamstrup_601#Volume=0.00
in the log of my wemos D1. I connect the TX and RX of my sensor to D5 and D6 of my Wemos. GND to GND and power to 3,3V
Is there someone who succeeded to rewrite this script or find another way to implant this type of Kamsstrup in Domoticz?