MQTT IMPORT and rules trigger

[leel1967l]

Hi,
Does MQTT Import modified with taskvalueset triggers a rule?

I am having the following issue:
I created a MQTT IMPORT task (name=import, value=set1, task number 2) and the following rule:

Code: Select all

on import#set1 do
  ..do something ..
endon

If I fire the command from a rule:

Code: Select all

taskvalueset,2,1,100
taskRun,2

Log:

Code: Select all

145870 : ACT : taskvalueset,2,1,100
145883 : ACT : taskRun,2

The first rule is not triggered



Wemos D1
Firmware: mega-20180326

[leel1967l]

I have updated the description of the problem after fixing some syntax errors.

Can anyone have a look?

[toffel969]

Hi,
Does MQTT Import modified with taskvalueset triggers a rule?

I am having the following issue:
I created a MQTT IMPORT task (name=import, value=set1, task number 2) and the following rule:

Code: Select all

on import#set1 do
  ..do something ..
endon

If I fire the command from a rule:

Code: Select all

taskvalueset,2,1,100
taskRun,2

Log:

Code: Select all

145870 : ACT : taskvalueset,2,1,100
145883 : ACT : taskRun,2

The first rule is not triggered



Wemos D1
Firmware: mega-20180326

I'm not sure, but like stated in the other thread, you should probably not use taskvalueset on the mqtt import device.