Thinkspeak does not receive all of the data

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
Dondolo
Normal user
Posts: 77
Joined: 03 Jul 2019, 06:56
Location: Germany

Thinkspeak does not receive all of the data

#1 Post by Dondolo » 07 Aug 2021, 17:07

Hi,
I have problems with Thinkspeak, the data is only partially arriving

Just updated to mega 20210802
ESP_Easy_mega_20210802_test_B_ESP32_4M316k.bin

I configured the Thinkspeak Controller as follows:


Task 1, 4, 60 controller no.3 should be transferred

However, only data from controller no. 1 and 4 are displayed.

Also with the command under Rules:

SendToHTTP, api.thingspeak.com, 80, / update? Api_key = xxxxxxxxxxxxx = [BH1750 # Lux]

it didn't work.

Does anyone have an idea why this might be?

Greetings Dondolo
Attachments
task.JPG
task.JPG (135.79 KiB) Viewed 5305 times
Unbenannt.JPG
Unbenannt.JPG (65.41 KiB) Viewed 5305 times

User avatar
Ath
Normal user
Posts: 3416
Joined: 10 Jun 2018, 12:06
Location: NL

Re: Thinkspeak does not receive all of the data

#2 Post by Ath » 07 Aug 2021, 17:19

What Controllers are configured at slots 1 and 2?
/Ton (PayPal.me)

Dondolo
Normal user
Posts: 77
Joined: 03 Jul 2019, 06:56
Location: Germany

Re: Thinkspeak does not receive all of the data

#3 Post by Dondolo » 07 Aug 2021, 17:57

Code: Select all

What Controllers are configured at slots 1 and 2?
I'm not quite sure is that what you mean?



Is this command correctly written?

Code: Select all

SendToHTTP,api.thingspeak.com,80,/update?api_key=xxxxxxxxx&field3=[BH1750#Lux]
Attachments
controllers.JPG
controllers.JPG (59.56 KiB) Viewed 5301 times
Last edited by Dondolo on 07 Aug 2021, 20:33, edited 1 time in total.

User avatar
Ath
Normal user
Posts: 3416
Joined: 10 Jun 2018, 12:06
Location: NL

Re: Thinkspeak does not receive all of the data

#4 Post by Ath » 07 Aug 2021, 19:05

You might want to take that key out of your post.

I don't speak ThingSpeak, so can't say how correct that is.
/Ton (PayPal.me)

Dondolo
Normal user
Posts: 77
Joined: 03 Jul 2019, 06:56
Location: Germany

Re: Thinkspeak does not receive all of the data

#5 Post by Dondolo » 07 Aug 2021, 20:14

You might want to take that key out of your post.
With, typed too fast. Yes, but how?

User avatar
Ath
Normal user
Posts: 3416
Joined: 10 Jun 2018, 12:06
Location: NL

Re: Thinkspeak does not receive all of the data

#6 Post by Ath » 07 Aug 2021, 20:28

Your post has a pencil button in the right top, that's the Edit button ;)
/Ton (PayPal.me)

Dondolo
Normal user
Posts: 77
Joined: 03 Jul 2019, 06:56
Location: Germany

Re: Thinkspeak does not receive all of the data

#7 Post by Dondolo » 07 Aug 2021, 20:33

a little smarter again, thank you.

Dondolo
Normal user
Posts: 77
Joined: 03 Jul 2019, 06:56
Location: Germany

Re: Thinkspeak does not receive all of the data

#8 Post by Dondolo » 07 Aug 2021, 20:35

And an idea about the actual problem?

TD-er
Core team member
Posts: 8643
Joined: 01 Sep 2017, 22:13
Location: the Netherlands
Contact:

Re: Thinkspeak does not receive all of the data

#9 Post by TD-er » 08 Aug 2021, 00:17

What interval is used to send data to the controller?
So the interval of the tasks.
You have the controller set to only send a message every 15 sec and the queue full action is set to "ignore new".
I think with the large interval needed by Thinkspeak, you may want to set it to "delete oldest".
Also try to make a list of values you try to send and at what interval.
It could be you're filling up the queue with messages from only 1 or 2 tasks and ignoring the rest because the queue is full.

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 31 guests