Emoncms Setup Instructions - Scribbles

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
rmtucker
Normal user
Posts: 57
Joined: 04 Oct 2015, 17:14

Emoncms Setup Instructions - Scribbles

#1 Post by rmtucker » 11 Oct 2015, 16:42

After adding the Emoncms Plugin R35 i thought a few notes might Help Setup:-

Click on config.

1.Change the protocol to emoncms
2.Change the controller IP to 80.243.190.58
3.Change the controller port to 80
4.Change the controller password to your emoncms write apikey
5.Change the unit number if desired - Will be passed to Emoncms as Node number
6.Keep the Sensor Delay above 15 Seconds

Note:- I have made a pull request for step 5 to work - Hopefully this will be committed to the master branch shortly

Hope these few scribbles help!!!!

Post Reply

Who is online

Users browsing this forum: No registered users and 19 guests