I have S8 and lastest ESPeasy firmware. I did everythingthat i found in domoticz and Letscontrol forums but have no idea how to send ppm to domoticz? http and mqtt rules just won`t working!
How to convert this MQTT data to domoticz.
almost forgot, if i create custom sensor it work fine, but i would like to see good or bad air quality.
I tried these code
Code: Select all
on SEns#ppm do
SendToHTTP 192.168.0.108,8080,/json.htm?type=command¶m=udevice&idx=59&nvalue=[SEns#ppm]
endon
on SEns#ppm do
TaskValueSet 2,1,[SEns#ppm]
Publish domoticz/in,'{"idx":57,"nvalue":"[Co2Test#Dummy]"}'
endon