Page 1 of 1

Atlantic MD 210R

Posted: 22 Nov 2016, 15:52
by bl83
Bonjour,

Systéme domotique : Jeedom 2.4.6 / RFlink / Z-Stick GEN5 - Aeon Labs

Depuis la version RFLink V43 je n'ai plus de remontés d'information des capteurs MD 210R. J'ai essayer de les supprimer -> aucune détection en mode inclusion.
Voici les logs entre le Plugin de Jeedom et l'interface RFLink lors d'une ouverture/ fermeture porte ou fenêtre :

Code: Select all

-> V42
Fri Nov 18 2016 22:20:12 GMT+0100 (CET) - Send Value : 20;04;Atlantic;ID=5ea3c6;SWITCH=01;CMD=ON;
Fri Nov 18 2016 22:20:15 GMT+0100 (CET) - Send Value : 20;05;Atlantic;ID=5ea3c6;SWITCH=01;CMD=OFF;

V44
Fri Nov 18 2016 22:17:19 GMT+0100 (CET) - Send Value : 20;02;Atlantic;ID=5ea3c6;SWITCH=01;CMD=ON;DEBUG=
Fri Nov 18 2016 22:17:19 GMT+0100 (CET) - Send Value : 5ea3c64e02;
Fri Nov 18 2016 22:17:24 GMT+0100 (CET) - Send Value : 20;03;Atlantic;ID=5ea3c6;SWITCH=01;CMD=OFF;DEBUG=
Fri Nov 18 2016 22:17:24 GMT+0100 (CET) - Send Value : 5ea3c60e06;
Fri Nov 18 2016 22:17:29 GMT+0100 (CET) - Send Value : 20;04;Atlantic;ID=5ea3c6;SWITCH=01;CMD=OFF;DEBUG=
Fri Nov 18 2016 22:17:29 GMT+0100 (CET) - Send Value : 5ea3c61e07;
La trame n'est plus la même DEBUG= apparait.
Est ce une modification définitive ou un oubli lors du debuggage (je dis peut être une co..erie je débute en domotique) ?
Merci
Cordialement

I try translate :

Since the RFLink V43 version I haven't any feedback from the MD 210R sensors. I try to remove them -> no detection in inclusion mode.
Here are the logs between the Jeedom Plugin and the RFLink interface when opening / closing door or window:

The frame is different DEBUG = appears.
Is this a definitive modification or an oversight during debugging (may be i make an error, I'm a beginer)?
Thank you
Regards

Re: Atlantic MD 210R

Posted: 22 Nov 2016, 16:00
by Stuntteam
Solved in upcoming r45

Re: Atlantic MD 210R

Posted: 22 Nov 2016, 18:12
by bl83
Hi,

Thank you for fast reply.

Is it possible to test v45 beta ? :oops:

regards