RTS Records getting overwritten
Posted: 11 Jun 2021, 20:52
I have successfully paired my blinds with the RFlink, and can control them without a problem. Issue is, sometimes my RTS records get overwritten by codes from physical remotes. So for example this morning I found one of my blinds wasn't opening. When digging into it I found that the RTS record was overwritten by an unknown address:
(I had my RTS addresses 00FFF1 til 00FFF5 in records 3 to 7).
So, 2 questions:
* Is there a way I can somehow "lock" the RTS records, disallowing any new codes to be "learned"
* Is it overwriting my records because I chose to start with 00?
Code: Select all
RTS Record: 0 Address: 2FB946 RC: 08D9
RTS Record: 1 Address: AE71CD RC: 1118
RTS Record: 2 Address: FFFFFF RC: FFFF
RTS Record: 3 Address: 52834E RC: 0001
RTS Record: 4 Address: 00FFF2 RC: 0004
RTS Record: 5 Address: 00FFF3 RC: 0002
RTS Record: 6 Address: 00FFF4 RC: 0002
RTS Record: 7 Address: 00FFF5 RC: 0005
RTS Record: 8 Address: FFFFFF RC: FFFF
RTS Record: 9 Address: FFFFFF RC: FFFF
RTS Record: 10 Address: 2CB946 RC: 02DC
RTS Record: 11 Address: 2DB946 RC: 030F
RTS Record: 12 Address: 2EB946 RC: 05CF
RTS Record: 13 Address: 30B946 RC: 18C4
RTS Record: 14 Address: FFFFFF RC: FFFF
RTS Record: 15 Address: 000000 RC: 0002
So, 2 questions:
* Is there a way I can somehow "lock" the RTS records, disallowing any new codes to be "learned"
* Is it overwriting my records because I chose to start with 00?