Search found 244 matches
- 07 Mar 2020, 10:52
- Forum: ESP Easy: General Discussion
- Topic: Wifi password
- Replies: 18
- Views: 24925
Wifi password
After finishing flashing my ESP (several models) with the latest firmware release (but also previous firmware versions),using the ESP.Easy.Flasher.exe opened as admin, I want to connect to the ESPWIFI network to config it. I get a WIFI security message that I must add a password (which password). In...
- 14 Jan 2020, 19:02
- Forum: ESP Easy: General Discussion
- Topic: Rules HTTP call
- Replies: 6
- Views: 6827
Re: Rules HTTP call
Thanks for all the help and it worked for me. I upgraded to version 20191208, activated the tolerant option and finalized this project.
- 13 Jan 2020, 22:24
- Forum: ESP Easy: General Discussion
- Topic: Rules HTTP call
- Replies: 6
- Views: 6827
Re: Rules HTTP call
I tried to activate the option in 'Advanced' but at the moment I use the version mega-20180720 and there is no tolerant option. I was not able to load the Latest version 20191208 on my WEMOS D1 but I had problems with my USB connection so I tried the mega-20180720. I can try to load the new 20191208...
- 13 Jan 2020, 21:14
- Forum: ESP Easy: General Discussion
- Topic: Rules HTTP call
- Replies: 6
- Views: 6827
Rules HTTP call
Read the WIKI and the forum but still not working I have switch on my ESP (Alarm_scherp#Alarm_status). If the status is "1" it must switch "on" a domoticz dummy switch. There is no need to turn it of OFF again. If I run the SendRoHTTP in my browser the dummy switch turns on. Why ...
- 29 Sep 2019, 22:43
- Forum: ESP Easy: General Discussion
- Topic: JSON multiple devices
- Replies: 9
- Views: 9642
Re: JSON multiple devices
Good point. tested and Result=OK.
Also mentioned that in Domoticz an switch is working if turned on using
http://127.0.0.1:8080/json.htm?type=com ... log&idx=29
But in a rule it does not work (adjusted to the Rules requirements)
Also mentioned that in Domoticz an switch is working if turned on using
http://127.0.0.1:8080/json.htm?type=com ... log&idx=29
But in a rule it does not work (adjusted to the Rules requirements)
- 29 Sep 2019, 21:27
- Forum: ESP Easy: General Discussion
- Topic: JSON multiple devices
- Replies: 9
- Views: 9642
Re: JSON multiple devices
Thanks for the reply and yes I have already read the Rules documentation several time but, this evening again. Perhaps you are right to start with MQTT. I must find a good starting point for MQQT in combi with ESP. Will put some effort in it the upcoming week. About the rules, this I what I have for...
- 29 Sep 2019, 19:21
- Forum: ESP Easy: General Discussion
- Topic: JSON multiple devices
- Replies: 9
- Views: 9642
Re: JSON multiple devices
now I tried to place them in RULES of my esp like this
On clean_log#state do
[GPIO12#State] = 1
SendToHTTP 127.0.0.1,8080,/json.htm?type=command¶m=clearlightlog&idx=29
endon
But still no luck.
Any advise is welcome!
On clean_log#state do
[GPIO12#State] = 1
SendToHTTP 127.0.0.1,8080,/json.htm?type=command¶m=clearlightlog&idx=29
endon
But still no luck.
Any advise is welcome!
- 29 Sep 2019, 14:09
- Forum: ESP Easy: General Discussion
- Topic: JSON multiple devices
- Replies: 9
- Views: 9642
Re: JSON multiple devices
is this the right direction to solve this problem: --log cleanup If (devicechanged['logSwitch']== "On") then os.execute('curl -s "http://127.0.0.1:8080/json.htm?type=command¶m=clearlightlog&idx=20" &') end return commandArray It does not work but still trying to f...
- 29 Sep 2019, 12:23
- Forum: ESP Easy: General Discussion
- Topic: JSON multiple devices
- Replies: 9
- Views: 9642
Re: JSON multiple devices
Temporary solution for me is a selector switch to start the " http://127.0.0.1:8080/json.htm?type=command¶m=clearlightlog&idx=29" for each individual idx. Again has somebody any clue how to hget these individual JSON entries "http://127.0.0.1:8080/json.htm?type=command&...
- 27 Sep 2019, 20:08
- Forum: ESP Easy: General Discussion
- Topic: JSON multiple devices
- Replies: 9
- Views: 9642
JSON multiple devices
I want to execute this script http://ip:port/json.htm?type=command¶m=clearlightlog&idx=<idx> using a button in domoticz. Pushing the "ON" it must execute this script for multiple devices. It works for one already (http://ip:port/json.htm?type=command¶m=clearlightlog&...
- 18 Aug 2019, 11:33
- Forum: ESP Easy: Hardware
- Topic: New hackable ESP gadgets in local budget store "action" !!!
- Replies: 112
- Views: 295379
Re: New hackable ESP gadgets in local budget store "action" !!!
Nice, keep posting your results. A few times a month I visit this store but never noticed theses items. I will buy a module for testing.
- 17 Aug 2019, 21:30
- Forum: ESP Easy: Hardware
- Topic: New hackable ESP gadgets in local budget store "action" !!!
- Replies: 112
- Views: 295379
Re: New hackable ESP gadgets in local budget store "action" !!!
Nice, can you share a photo of the pir mentioned by you so I can buy one myself.
- 19 Jun 2019, 20:49
- Forum: ESP Easy: Hardware
- Topic: Connecting the ds18b20 | Pull-up resistor needed?
- Replies: 3
- Views: 13517
Re: Connecting the ds18b20 | Pull-up resistor needed?
I have to 18b20 in use already for a long time and yes I use a pull-up resistor. without it was not stable or sometimes it did not work. Advise from me, use a resister to prevent troubles!
- 19 Mar 2019, 21:53
- Forum: ESP Easy: General Discussion
- Topic: start rule after delay
- Replies: 3
- Views: 2423
Re: start rule after delay
I've got it. Had put test more. Thanks! On kp#SC do If [kp#SC]=1.00 TaskValueSet,1,1,[kp#SC] SendToHTTP,192.168.1.123,8080,/json.htm?type=param=udevice&idx=317&nvalue=2&svalue=[dp#Df] TimerSet,1,5 If [kp#SC] = 2.00 TaskValueSet 1,1,[kp#SC] SendToHTTP 192.168.1.123,8080,/json.htm?type=par...
- 19 Mar 2019, 21:23
- Forum: ESP Easy: General Discussion
- Topic: start rule after delay
- Replies: 3
- Views: 2423
Re: start rule after delay
Thanks for the reply. It works fine for only this entry of my keypad. If I want to use the same for more buttons from my keypad, how does it look like? I think I have to do something with the Endif and Endon but do not know what. Pls advise me. On kp#SC do If [kp#SC]=1.00 TaskValueSet,1,1,[kp#SC] Se...
- 19 Mar 2019, 19:47
- Forum: ESP Easy: General Discussion
- Topic: start rule after delay
- Replies: 3
- Views: 2423
start rule after delay
Can anybody help me to finish my set of Rules. If [kp#SC] = 1.00 TaskValueSet 1,1,[kp#SC] SendToHTTP 192.168.1.123,8080,/json.htm?type=param=udevice&idx=317&nvalue=2&svalue=[dp#Df] TaskValueSet 1,1,4 SendToHTTP 192.168.1.123,8080,/json.htm?type=param=udevice&idx=317&nvalue=2&...
- 17 Mar 2019, 18:50
- Forum: ESP Easy: General Discussion
- Topic: TIMEout while reading input data!
- Replies: 3
- Views: 2779
Re: TIMEout while reading input data!
solved , the known issue mentioned solved the problem.
- 16 Mar 2019, 10:37
- Forum: ESP Easy: General Discussion
- Topic: TIMEout while reading input data!
- Replies: 3
- Views: 2779
Re: TIMEout while reading input data!
I experimented with it but perhaps I did some thing wrong, so instead of this: On keypad#ScanCode Do If [keypad#ScanCode] = 1.00 SendToHTTP 190.xxx.x.xxx,8080,/json.htm?type=command¶m=udevice&idx=235&nvalue=2&svalue=[keypad#ScanCode] Endif Endon It must look like this? On keypad#...
- 16 Mar 2019, 09:49
- Forum: ESP Easy: General Discussion
- Topic: TIMEout while reading input data!
- Replies: 3
- Views: 2779
TIMEout while reading input data!
I saw that more people asked questions related to this issue, but all info could not help me. Hardware: ESP 8266 1Mb, loaded Mega-20180621. Keypad-TTP229 Touch. I want to send the value of the touch nr1 to my Domoticz using this command: On keypad#ScanCode Do If [keypad#ScanCode] = 1.00 SendToHTTP 1...
- 20 Jan 2019, 17:48
- Forum: ESP Easy: General Discussion
- Topic: Touchpad TTP229 dummy value
- Replies: 2
- Views: 2280
Re: Touchpad TTP229 dummy value
Hi Thomas, I used SCl GPIO16 and SDO GPIO14. i found out that the keypad works fine, with the latest rom but the rules do not work in the latest roms. I my opinion all should work with the rew release of the final of the upcomming Rom. I am prepared
- 20 Jan 2019, 13:25
- Forum: ESP Easy: General Discussion
- Topic: Ir remote controle dummy value
- Replies: 0
- Views: 2065
Ir remote controle dummy value
I am testing an IR remote controle Receiver (YL-55). I use an ESP8266 rom version "mega-20180722". In the log I see the correct values pushing one of the buttons of the RC but in the device 'Value' field, the results differ than those of the log. I use the devise 'TSOP4838' and I know that...
- 03 Nov 2018, 08:55
- Forum: ESP Easy: General Discussion
- Topic: Touchpad TTP229 dummy value
- Replies: 2
- Views: 2280
Touchpad TTP229 dummy value
Still struggling getting my touchpad working. I created 2 divices: 1: device PPT229 touchpad called 'keypad', the value field is called 'ScanCode' 2: a virtual device called 'dumkeypad' , the value filed (the first one of the 4 available) is called 'Dumkeyfield'. to copy the the value of the 'ScanCo...
- 16 Aug 2018, 20:53
- Forum: ESP Easy: General Discussion
- Topic: Domotics user variable
- Replies: 6
- Views: 5074
Re: Domotics user variable
The IP adding in Domoticz did the job. Now it is working! Thanks all for the good suggestions.
- 15 Aug 2018, 21:23
- Forum: ESP Easy: General Discussion
- Topic: Domotics user variable
- Replies: 6
- Views: 5074
Re: Domotics user variable
Still no progress. This is what I have: On keypad#ScanCode Do If [keypad#ScanCode] = 8.00 TaskValueSet 1,1,[keypad#ScanCode] SendToHTTP 192.168.1.123,8080,/json.htm?type=command¶m=updateuservariable&vname=Varkeypad&vtype=String&vvalue=25 Endif Endon If I put http://192.168.1.123:...
- 14 Aug 2018, 20:20
- Forum: ESP Easy: General Discussion
- Topic: Domotics user variable
- Replies: 6
- Views: 5074
Re: Domotics user variable
thanks, I removed the space but still no update of the user var in Domoticz.
Any more suggestions?
I know the IP is ok and the name of the Var as wel.
Any more suggestions?
I know the IP is ok and the name of the Var as wel.
- 14 Aug 2018, 19:44
- Forum: ESP Easy: General Discussion
- Topic: Domotics user variable
- Replies: 6
- Views: 5074
Domotics user variable
I am not able to send the value of an ESp keypad device into a user vari in Domoticz. What I have is the Rule: If [keypad#ScanCode] = 2.00 TaskValueSet 1,1,[keypad#ScanCode] SendTo HTTP 192.168.1.123,8080,/json.htm?type=command¶m=updateuservariable&vname=Varkeypad&vtype=2&vvalue=...
- 11 Aug 2018, 11:33
- Forum: ESP Easy: General Discussion
- Topic: keypad TTP229
- Replies: 2
- Views: 2158
Re: keypad TTP229
perhaps it was clear what I want, on my ESP I see in the log file of the device "Keypad - TTP229 Touch". I want to receive that value in Domoticz. Questions: What kind of device do I need to create in Domoticz for receiving the results (tried already a dummy as an counter but no results in...
- 09 Aug 2018, 18:09
- Forum: ESP Easy: General Discussion
- Topic: keypad TTP229
- Replies: 2
- Views: 2158
Re: keypad TTP229
it would help me how I can readout the result I see in the log of my ESP, and can see the same results in Domoticz so I can use these results in an scene.
- 08 Aug 2018, 20:56
- Forum: ESP Easy: General Discussion
- Topic: keypad TTP229
- Replies: 2
- Views: 2158
keypad TTP229
can be closed
- 24 Jun 2018, 20:55
- Forum: ESP Easy: General Discussion
- Topic: MCP23017
- Replies: 10
- Views: 7165
Re: MCP23017
An update of my testing, Still running after one hr! I can finish my project. Thanks for the support!
- 24 Jun 2018, 20:09
- Forum: ESP Easy: General Discussion
- Topic: MCP23017
- Replies: 10
- Views: 7165
Re: MCP23017
thanks and about the power lines, I have an external power supply of 5v connected the the Vin on the ESP and also to the MCP on the IO side. The other powerline on the MSP is connected to the esp 3.3v
- 24 Jun 2018, 19:58
- Forum: ESP Easy: General Discussion
- Topic: MCP23017
- Replies: 10
- Views: 7165
Re: MCP23017
there is nothing else connected it is only the MCP. About the pull up registers, I am not that experience but is that I have to place a 10K register from the GPIO ⇾ SCL: GPIO-5 and GPIO ⇿ SDA:GPIO-4 to the plus? is that correct?
- 24 Jun 2018, 19:25
- Forum: ESP Easy: General Discussion
- Topic: MCP23017
- Replies: 10
- Views: 7165
Re: MCP23017
I use the MCP23017 DIP SOP Bidirectional 16-Bit I/O Expander I2C IIC Serial Interface version bought on Ebay. It is connected plus and min on the two connectors and use the GPIO ⇾ SCL: GPIO-5 GPIO ⇿ SDA:GPIO-4 . It is strait forward and ik works fine for about 5 minutes and than it stops but my ESP ...
- 24 Jun 2018, 15:48
- Forum: ESP Easy: General Discussion
- Topic: MCP23017
- Replies: 10
- Views: 7165
MCP23017
I have a problem with the MCP23017 i.c.w. my 8266 (GIT version: mega-20180621) in a I2C setup. The ports of the MCP23017 are working as a switch with Domoticz as Controller. After starting the 8266, all ports of the MCP23017 are working fine but after a few minutes all ports stop working. There is n...
- 02 Mar 2018, 18:00
- Forum: ESP Easy: General Discussion
- Topic: esp8266 pulse swits to domoticz
- Replies: 16
- Views: 9141
Re: esp8266 pulse swits to domoticz
I have a working switch, lowering the MS from 1000 ti 100 worked out very well. Thank you for the support and now I try to finish my project. Have a nice evening.
- 02 Mar 2018, 13:33
- Forum: ESP Easy: General Discussion
- Topic: esp8266 pulse swits to domoticz
- Replies: 16
- Views: 9141
Re: esp8266 pulse swits to domoticz
what I found just now, after pushing "submit" on my ESP, I am able to send a change of the switch to domoticz a few times and after 2-3 times changing the status of the switch, it does not work anymore. After "submit "it works again for a few times
- 02 Mar 2018, 13:23
- Forum: ESP Easy: General Discussion
- Topic: esp8266 pulse swits to domoticz
- Replies: 16
- Views: 9141
Re: esp8266 pulse swits to domoticz
Yes I see the "value" switching from 0 to 1 after puching the button
- 02 Mar 2018, 12:33
- Forum: ESP Easy: General Discussion
- Topic: esp8266 pulse swits to domoticz
- Replies: 16
- Views: 9141
Re: esp8266 pulse swits to domoticz
Still working on the button. So the situation is, I have an esp, on a switch device a puls is received and that pulse need to be send to Domoticz where it change the status from a domoticz switch. How can I get that working? any help is welcome. At the moment I use GPIO-15 as a normal switch and act...
- 01 Mar 2018, 22:52
- Forum: ESP Easy: General Discussion
- Topic: esp8266 pulse swits to domoticz
- Replies: 16
- Views: 9141
Re: esp8266 pulse swits to domoticz
I changed it into gpio 12. Result in Domoticz an continue production of "OFF" logs and does not stop. I know the ESP works goo because there is also a relay connected to the esp and clicking on the button in Domoticz, the relay activates. so from Domoticz to ESP is working but the other wa...
- 01 Mar 2018, 22:32
- Forum: ESP Easy: General Discussion
- Topic: esp8266 pulse swits to domoticz
- Replies: 16
- Views: 9141
Re: esp8266 pulse swits to domoticz
thanks for the reply. that is all what I did but after giving a pulse to my gpio 0 the log in domoticz continue in giving an "Off" and will not stop. it is a latch switch and in the off setting in Domoticz 1sec is added.. On my ESp I activated the pull up Any Idea
- 01 Mar 2018, 22:16
- Forum: ESP Easy: General Discussion
- Topic: esp8266 pulse swits to domoticz
- Replies: 16
- Views: 9141
esp8266 pulse swits to domoticz
How can I get it work. A pulse added ti a GPIO in my 8266 and activate a virtual switch in Domoticz. What i did alredy, add a device on 8266 and make it a switch input, normal switch. created a virtual switch in domiticz and add to "on action" the switch hyperlink. Why don't I see somethin...
- 11 Feb 2018, 18:26
- Forum: ESP Easy: Projects / Applications
- Topic: SSD1306 not framed
- Replies: 4
- Views: 4157
Re: SSD1306 not framed
thanks for the solution and put the WIKI in my Favorites.
- 11 Feb 2018, 18:05
- Forum: ESP Easy: Projects / Applications
- Topic: SSD1306 not framed
- Replies: 4
- Views: 4157
Re: SSD1306 not framed
I am new in this area. can you give me more info where to put the RST. I have no extra pin for that on my display.
- 11 Feb 2018, 17:40
- Forum: ESP Easy: Projects / Applications
- Topic: SSD1306 not framed
- Replies: 4
- Views: 4157
SSD1306 not framed
I used an Oled display SSD 1306 in a setpoint project. Now The first line display "ESP Easy" on my Oled. I did not add it to my settings. Can I make the first line empty again and How can I manage that?