Search found 307 matches
- 06 Apr 2019, 11:44
- Forum: ESP Easy: Hardware
- Topic: Reboot cause: WEMOS D1 (clone) voltage regulator ??
- Replies: 10
- Views: 20371
Re: Reboot cause: WEMOS D1 (clone) voltage regulator ??
Thanks for your response ThomasB, I'm running mostly NodeMCU's Are NodeMCU's free of the reboot problem ? another issue with the XC6204 is that Vin MUST be at least 2V greater than Vout (2V dropout) Where/how did you find that ? This document https://www.torexsemi.com/file/xc6205/XC6204-XC6205.pdf s...
- 05 Apr 2019, 17:58
- Forum: ESP Easy: Hardware
- Topic: Reboot cause: WEMOS D1 (clone) voltage regulator ??
- Replies: 10
- Views: 20371
Reboot cause: WEMOS D1 (clone) voltage regulator ??
I highly suspect the WEMOS D1 (clone) voltage regulator to be part of the reboot problem. This low-dropout or LDO regulator has SMD marking code 4A2D which leads to the Torex XC6204. From this LDO there are 150mA and 300 mA versions. The 300mA is the XC6204 E to H type. The SMD marking code 4A2D giv...
- 30 Mar 2019, 12:13
- Forum: RPiEasy: General Discussion
- Topic: RPIEasy
- Replies: 332
- Views: 496498
Re: RPIEasy
more precise ... it switches the back light.is it simply switching on and off the display?
- 29 Mar 2019, 23:16
- Forum: ESP Easy: General Discussion
- Topic: ESP With 2 Relay 1 Button Control?
- Replies: 3
- Views: 3116
Re: ESP With 2 Relay 1 Button Control?
Learn by trying different options....
Double click seems to be detected as single click first.
That's why I wrote:
Double click seems to be detected as single click first.
That's why I wrote:
My experience is that long press is more robust.
- 29 Mar 2019, 13:07
- Forum: ESP Easy: General Discussion
- Topic: ESP With 2 Relay 1 Button Control?
- Replies: 3
- Views: 3116
Re: ESP With 2 Relay 1 Button Control?
Did you study the docs?
You could use double click or long press
https://espeasy.readthedocs.io/en/lates ... ng%20press
and add a rule to it with Switch#State=3, 10 or 11
My experience is that long press is more robust.
You could use double click or long press
https://espeasy.readthedocs.io/en/lates ... ng%20press
and add a rule to it with Switch#State=3, 10 or 11
My experience is that long press is more robust.
- 26 Mar 2019, 23:21
- Forum: ESP Easy: General Discussion
- Topic: Wifi seems to be dead.. how to get the config (r120)
- Replies: 6
- Views: 4112
Re: Wifi seems to be dead.. how to get the config (r120)
My guess:
.... the 49 day bug ???
In those days there was a counter that went wrong.
A re-boot within the 49 day time-frame was the solution (make a rule).
or ... as for now, power off & on is the only way to get the Wifi connection back.
.... the 49 day bug ???
In those days there was a counter that went wrong.
A re-boot within the 49 day time-frame was the solution (make a rule).
or ... as for now, power off & on is the only way to get the Wifi connection back.
- 26 Mar 2019, 17:12
- Forum: ESP Easy: Software
- Topic: normal or normal_core_241 or normal_core_242
- Replies: 5
- Views: 4909
Re: normal or normal_core_241 or normal_core_242
You could search here for 2.4.2
https://github.com/letscontrolit/ESPEas ... _notes.txt
or here
https://github.com/letscontrolit/ESPEasy/
https://github.com/letscontrolit/ESPEas ... _notes.txt
or here
https://github.com/letscontrolit/ESPEasy/
- 13 Mar 2019, 22:18
- Forum: ESP Easy: General Discussion
- Topic: Display GPIO state with text
- Replies: 9
- Views: 5490
Re: Display GPIO state with text
From my notes: Format Transformation: Feature to transform Values from numeric to strings or to format numeric values. Syntax: [task#value#transformation#justification] Where #transformation is: Format of PIN states of GPIO (0 or 1) #V: value unformatted #O: 1/0 -> ON/OFF #C: 1/0 -> OPEN/CLOSE #U: 1...
- 01 Mar 2019, 16:48
- Forum: ESP Easy: Hardware
- Topic: heltec-wifi-kit-8 and espeasy
- Replies: 1
- Views: 2607
- 09 Feb 2019, 12:55
- Forum: ESP Easy: Hardware
- Topic: GY-530 VL53L0X Laser Ranging Sensor Time-of-Flight
- Replies: 76
- Views: 35628
- 07 Feb 2019, 22:45
- Forum: ESP Easy: Software
- Topic: Reboot inside rules?
- Replies: 74
- Views: 53320
Re: Reboot inside rules?
Yep,Does that make sense?
Added around August 2017:
https://github.com/letscontrolit/ESPEasy/pull/485
- 07 Feb 2019, 22:31
- Forum: ESP Easy: Software
- Topic: Plugin_153 MAX44009, anyone got it working ?
- Replies: 13
- Views: 14383
Re: Plugin_153 MAX44009, anyone got it working ?
Is part of the playground https://github.com/letscontrolit/ESPEasyPluginPlayground So you have to add it to your own compilation. You could request to add it to the mega here: https://github.com/letscontrolit/ESPEasy/issues?q=is%3Aissue+sort%3Aupdated-desc+is%3Aopen This will help: http://ko-fi.com/...
- 06 Feb 2019, 20:40
- Forum: ESP Easy: General Discussion
- Topic: Map switch binary to String
- Replies: 5
- Views: 4678
Re: Map switch binary to String
Found in my notes: From here https://github.com/letscontrolit/ESPEasy/pull/1289#issuecomment-383228300 for the Wiki: Format Transformation: Feature to transform Values from numeric to strings or to format numeric values. Syntax: [task#value#transformation#justification] Where #transformation is: For...
- 06 Feb 2019, 00:10
- Forum: Staff Announcements forum
- Topic: BIG announcement, the future of ESP Easy. [READ THIS IF YOU LOVE OUR FW]
- Replies: 105
- Views: 1524989
Re: BIG announcement, the future of ESP Easy. [READ THIS IF YOU LOVE OUR FW]
@TD-er and @grovkillen: Both of you, all the best with your new business. I'll hope you can find financial and intellectual satisfaction. Thanks for your endless support for EspEasy and the ideas to combine "open source" without "empty pocket". I'll hope we reach again soon a &qu...
- 04 Feb 2019, 12:59
- Forum: ESP Easy: Software
- Topic: Which plugins are in which binary version ?
- Replies: 1
- Views: 2068
Re: Which plugins are in which binary version ?
here:
https://espeasy.readthedocs.io/en/lates ... gin%20list
and here:
https://www.letscontrolit.com/wiki/inde ... lugin_list
Tip: your browser history!
https://espeasy.readthedocs.io/en/lates ... gin%20list
and here:
https://www.letscontrolit.com/wiki/inde ... lugin_list
Tip: your browser history!
- 20 Jan 2019, 13:25
- Forum: ESP Easy: Software
- Topic: Reboot inside rules?
- Replies: 74
- Views: 53320
Re: Reboot inside rules?
Nice and round:Just out of curiosity: why the 60000 limit? Arbitrary?
60000 minutes is 41,6 days
- 20 Jan 2019, 12:02
- Forum: ESP Easy: Software
- Topic: Reboot inside rules?
- Replies: 74
- Views: 53320
Re: Reboot inside rules?
To prevent the 49 day bug:
A Task: System Info, called Uptime
With Variable MUC1_Uptime
Rule:
A Task: System Info, called Uptime
With Variable MUC1_Uptime
Rule:
Code: Select all
On Uptime#MUC1_Uptime do
if [Uptime#MUC1_Uptime]>60000
Reboot
endif
endon
- 19 Jan 2019, 23:38
- Forum: ESP Easy: Projects / Applications
- Topic: Flow, temperature, energy measurement and PWM pump control
- Replies: 14
- Views: 16916
Boiler thermostat, NTC adaption
Reserved for: - Boiler thermostat by NTC adaption - with automated timed rule - with manual rotary encoder adjustment Heating concept: De-couple heat-producers from heat-consumers. Let producers and consumers run in their optimal "sweat spot" and "shave the peaks" Idea: My future...
- 17 Jan 2019, 17:07
- Forum: ESP Easy: General Discussion
- Topic: LCD Clear only spec lines?
- Replies: 2
- Views: 2148
Re: LCD Clear only spec lines?
Write spaces to the specific line?
https://www.letscontrolit.com/wiki/inde ... LCDDisplay
https://www.letscontrolit.com/wiki/inde ... LCDDisplay
- 16 Jan 2019, 11:11
- Forum: ESP Easy: Software
- Topic: PCA9685 connecting problem
- Replies: 13
- Views: 10517
Re: PCA9685 connecting problem
But maybe I'm wrong I think you are right! The fourth bit seems INVRT/NOT INVRT: 0x10 (Binary 00010000) and 0x00 (Binary 00000000) That explains 4 of the 32 (!!) options 0x00 : open-drain 0x04 : totem pole 0x10 : Inverted logic / open-drain 0x14 : Inverted logic / totem pole From that description o...
- 16 Jan 2019, 01:16
- Forum: ESP Easy: General Discussion
- Topic: ESPEasy v2.0.0-dev13
- Replies: 39
- Views: 40195
Re: ESPEasy v2.0.0-dev13
Here is dev13
https://github.com/letscontrolit/ESPEas ... .0.0-dev13
From this URL you can deduce older versions, like
https://github.com/letscontrolit/ESPEas ... 2.0.0-dev7
https://github.com/letscontrolit/ESPEas ... .0.0-dev13
From this URL you can deduce older versions, like
https://github.com/letscontrolit/ESPEas ... 2.0.0-dev7
- 15 Jan 2019, 16:56
- Forum: ESP Easy: Software
- Topic: PCA9685 connecting problem
- Replies: 13
- Views: 10517
Re: PCA9685 connecting problem
For reference on Oct 22, 2018:
https://github.com/letscontrolit/ESPEasy/issues/1940
(that I don't understand)
What is the meaning of mode 0x10 and mode 0x14 ?
https://github.com/letscontrolit/ESPEasy/issues/1940
(that I don't understand)
What is the meaning of mode 0x10 and mode 0x14 ?
- 15 Jan 2019, 16:30
- Forum: ESP Easy: General Discussion
- Topic: Where to find uploader and binaries for 2.0 Firmware?
- Replies: 6
- Views: 4171
Re: Where to find uploader and binaries for 2.0 Firmware?
And what version do you use?
- 14 Jan 2019, 21:13
- Forum: ESP Easy: Software
- Topic: HC-SR04 and the temperature
- Replies: 5
- Views: 6565
Re: HC-SR04 and the temperature
Speed of Sound:
But ... useful?
Don't think so.
1 degree difference is less than 0.2% speed difference.
@20C:c = 331.3 + 0.606 × Temperature_in_C
You can measure the temperature and compensate for the difference to 20C in a rule.c = 331.3 + 0.606 × 20 = 343.42 m/s
But ... useful?
Don't think so.
1 degree difference is less than 0.2% speed difference.
- 14 Jan 2019, 00:32
- Forum: ESP Easy: Software
- Topic: PCA9685 connecting problem
- Replies: 13
- Views: 10517
Re: PCA9685 connecting problem
I2C Scan in ESPEasy and it found at adress 0x40 Although you found an address ... Did you ... Connect a pull-up resistor(1.5k to 10k) on SDA line. Connect a pull-up resistor(1.5k to 10k) on SCL line ? Although it should not be needed (there should be a pull-up on-board): SCL - I2C clock pin, connec...
- 11 Jan 2019, 16:38
- Forum: ESP Easy: Hardware
- Topic: sensor - hw-611 e/p 280
- Replies: 6
- Views: 17375
Re: sensor - hw-611 e/p 280
Marking on the Bosch chip.Sorry for the stupid question, but is there any way I can know if it is a K or U?
Discussed here:
https://goughlui.com/2018/08/05/note-bo ... confusion/
- 11 Jan 2019, 10:06
- Forum: ESP Easy: Software
- Topic: Variables for use in rules??
- Replies: 18
- Views: 26471
Re: Variables for use in rules??
Where did you find the list of commands to use in rules? While reading the forum, I collect snippets of Rules as examples in a document. The (new) "Let" statement one was found here: https://www.letscontrolit.com/forum/viewtopic.php?f=4&t=5961&p=32580&hilit=let%2C1%2C10+this+w...
- 10 Jan 2019, 22:57
- Forum: ESP Easy: Software
- Topic: ESPEasy R120 no setting for resolution DS18B20
- Replies: 11
- Views: 7370
Re: ESPEasy R120 no setting for resolution DS18B20
You could try this release:
https://github.com/letscontrolit/ESPEas ... .0.0-dev11
The GUI is slow but DS18B20 is running stable for me on several units
https://github.com/letscontrolit/ESPEas ... .0.0-dev11
The GUI is slow but DS18B20 is running stable for me on several units
- 09 Jan 2019, 21:25
- Forum: ESP Easy: Software
- Topic: Variables for use in rules??
- Replies: 18
- Views: 26471
Re: Variables for use in rules??
In rules you can use the command let
let,1,10 this will assign the value 10 to %v1%.
To get the value of %v1%, you can use %v1% or [VAR#1] depending on the rule syntax:
if %v1%=10
or
taskvalueset,1,1,%v1%
or
taskvalueset,1,1,[VAR#1]
let,1,10 this will assign the value 10 to %v1%.
To get the value of %v1%, you can use %v1% or [VAR#1] depending on the rule syntax:
if %v1%=10
or
taskvalueset,1,1,%v1%
or
taskvalueset,1,1,[VAR#1]
- 09 Jan 2019, 11:48
- Forum: ESP Easy: Projects / Applications
- Topic: UART parser plugin
- Replies: 2
- Views: 3567
Re: UART parser plugin
Not a direct help,but:
This could be worth reading:
https://github.com/letscontrolit/ESPEasy/issues/1588
Plugin template:
https://github.com/letscontrolit/ESPEas ... mplate.ino
This could be worth reading:
https://github.com/letscontrolit/ESPEasy/issues/1588
Plugin template:
https://github.com/letscontrolit/ESPEas ... mplate.ino
- 08 Jan 2019, 17:56
- Forum: ESP Easy: General Discussion
- Topic: Help you create the device rules for the following requirements
- Replies: 16
- Views: 13503
Re: Help you create the device rules for the following requirements
I think there is a command: monitor,GPIO,<pin> And I think On GPIO#<pin> Do will give an event. Mentioned here: https://www.letscontrolit.com/forum/viewtopic.php?f=4&t=5868&p=31804&hilit=monitor%2Cgpio%2Cx#p31804 Also for: monitor,PCF,<pin> monitor,MCP,<pin> Give it a try and share it wi...
- 05 Jan 2019, 20:26
- Forum: ESP Easy: General Discussion
- Topic: OLED on
- Replies: 23
- Views: 12074
Re: OLED on
Syntax error?
http://<espeasyip>/control?cmd=<command>
Single slash after IP !
http://<espeasyip>/control?cmd=<command>
Single slash after IP !
- 05 Jan 2019, 20:22
- Forum: ESP Easy: Software
- Topic: anyone using cjmcu-0101 sensor?
- Replies: 3
- Views: 2546
Re: anyone using cjmcu-0101 sensor?
Looks like a regular (supported) switch.
I use these, they come by #10
https://nl.aliexpress.com/item/10Pcs-TT ... Title=true
I use these, they come by #10
https://nl.aliexpress.com/item/10Pcs-TT ... Title=true
- 05 Jan 2019, 12:02
- Forum: ESP Easy: Software
- Topic: timer store into dummy device timer state timerstop
- Replies: 11
- Views: 5819
Re: timer store into dummy device timer state timerstop
Seen here: viewtopic.php?f=6&t=5841&p=31646&hilit= ... ble#p31646PS timerstop. did not find any reference in WIKI?
Code: Select all
Timer,1,0 //disable the timer
- 02 Jan 2019, 00:58
- Forum: ESP Easy: General Discussion
- Topic: Where to find uploader and binaries for 2.0 Firmware?
- Replies: 6
- Views: 4171
Re: Where to find uploader and binaries for 2.0 Firmware?
I was looking for the 2.0 firmware, but I can't find it anymore
- 01 Jan 2019, 22:43
- Forum: ESP Easy: General Discussion
- Topic: Where to find uploader and binaries for 2.0 Firmware?
- Replies: 6
- Views: 4171
Re: Where to find uploader and binaries for 2.0 Firmware?
Look at this page https://github.com/letscontrolit/ESPEasy/commit/853ddb0d380c42191071b164b8b1d962a21ceae9 In the blue banner, there you can see dots ... Click on ... to make a selection out-of all available releases Search in this page: https://github.com/letscontrolit/ESPEasy/blame/mega/dist/Relea...
- 01 Jan 2019, 18:50
- Forum: ESP Easy: Hardware
- Topic: Cannot get LCD to work
- Replies: 14
- Views: 15274
- 01 Jan 2019, 17:42
- Forum: ESP Easy: Hardware
- Topic: Cannot get LCD to work
- Replies: 14
- Views: 15274
Re: Cannot get LCD to work
Display needs 5V.
Use a level-shifter for SDA and SCL.
Use a level-shifter for SDA and SCL.
- 26 Dec 2018, 18:17
- Forum: ESP Easy: Hardware
- Topic: Cannot get LCD to work
- Replies: 14
- Views: 15274
Re: Cannot get LCD to work
potmeter adjustment ?
- 23 Dec 2018, 22:57
- Forum: ESP Easy: General Discussion
- Topic: A call for help :)
- Replies: 21
- Views: 9591
Re: A call for help :)
Ok. I think I understand it. What I will do: - make a collection of all release notes in one Excel file file - add a column R120, R147, 2.0, 2.1 section - add a column |fixed| |added| etc to it - add a column with the classification to it - add a column with the description/resume I will send the Ex...
- 23 Dec 2018, 20:24
- Forum: ESP Easy: General Discussion
- Topic: A call for help :)
- Replies: 21
- Views: 9591
Re: A call for help :)
Sorry, Willing to help...but.. don't understand your 1) Add changes that has been added since R147, only add to the 2.1 "mega" release note. and not understood: 2) The rest will be displayed as per my suggestion. What goes in what section? 3) - R120/R147 (not on Github ??) See bottom of th...
- 23 Dec 2018, 16:11
- Forum: ESP Easy: Hardware
- Topic: Support for PZEM 004T Energy monitor
- Replies: 309
- Views: 9250548
- 23 Dec 2018, 12:26
- Forum: ESP Easy: General Discussion
- Topic: A call for help :)
- Replies: 21
- Views: 9591
Re: A call for help :)
Back on topic, anyone feel the urge to help us? I try to understand what you are asking and how to do that. The latest Release_notes in Blame mode gives a full overview https://github.com/letscontrolit/ESPEasy/blame/mega/dist/Release_notes.txt In Raw mode: https://raw.githubusercontent.com/letscont...
- 22 Dec 2018, 00:45
- Forum: ESP Easy: Software
- Topic: Chicken door and light
- Replies: 14
- Views: 7091
Re: Chicken door and light
I'm not sure what you are doing but: - Task LED on GPIO 13 is defined as Task 3 as input - In the Rule you control GPIO 13 as output - GPIO-0 is a special one! Has a Pull-up on most boards. - That means your switch must be active Low (at least ... high at boot!) - Use GPIO-14 instead, just to make s...
- 22 Dec 2018, 00:31
- Forum: ESP Easy: General Discussion
- Topic: A call for help :)
- Replies: 21
- Views: 9591
Re: A call for help :)
I can add a force flag to force the wifi to B/G mode A GUI selection? Just G or N makes comparison tests possible. or maybe even in N mode but with forced smaller bandwidth. That does not help for the Rx/Tx gain. G gives 3dB more Tx/Rx gain: https://user-images.githubusercontent.com/35063211/481271...
- 21 Dec 2018, 22:50
- Forum: ESP Easy: General Discussion
- Topic: A call for help :)
- Replies: 21
- Views: 9591
Re: A call for help :)
I understand the need for a frozen version. But if it's there and not thoroughly tested, users come with a bug report, and you have to point them to .... try the latest ... If you offer a frozen version it needs to be good for (say) 90% of the community. I remember a proud post from grovkillen .... ...
- 21 Dec 2018, 18:54
- Forum: ESP Easy: General Discussion
- Topic: A call for help :)
- Replies: 21
- Views: 9591
Re: A call for help :)
With all respect for what you guys/developers do .. getting really close to an official release I hope not .. - with all those WatchDog reboots ... - with all those DS18B20 problems (talking about 3 wire connection).. A deadline is just a deadline ... in your mind. Be aware of the ESPEasy reputation.
- 20 Dec 2018, 18:31
- Forum: ESP Easy: Projects / Applications
- Topic: Bulk buy cool project shell/boxes/enclosure/cases
- Replies: 12
- Views: 8633
Re: Bulk buy cool project shell/boxes/enclosure/cases
Used this one before: https://ae01.alicdn.com/kf/HTB11izxewvD8KJjSsplq6yIEFXaS.jpg?size=153583&height=1000&width=1000&hash=6862606fe7018ee4bd8859765371b938 https://nl.aliexpress.com/item/DANSPEED-30cm-Micro-USB-5-Pin-Male-to-Female-Panel-Mount-Type-Extension-Adapter-Cable-Black/328438030...
- 20 Dec 2018, 10:37
- Forum: ESP Easy: Software
- Topic: Read temperature via web command on D1 with SHT30 installed
- Replies: 12
- Views: 7514
Re: Read temperature via web command on D1 with SHT30 installed
How about this: make an Event in Rules Event contains a SendToHTTP with the temperature Someting like (example to Domoticz): on testevent do SendToHTTP,x.x.x.x,8080,/json.htm?type=command¶m=udevice&idx=385&nvalue=0&svalue=[SHT30#Temperature] endon Call that Event from outside htt...
- 20 Dec 2018, 01:42
- Forum: ESP Easy: Projects / Applications
- Topic: Flow, temperature, energy measurement and PWM pump control
- Replies: 14
- Views: 16916
Re: Flow, temperature, energy measurement and PWM pump control
Reserved for patent discussion/infringement. I'm not a lawyer, but have some experience with patents as (co-)owner of 3 patents. Electrical scheme Version 3 claim: Offers a solution for a thermostat with continues compensation for heat loss by a pump with variable speed (0-100%) where the pump is tr...