Search found 307 matches

by Domosapiens
16 Mar 2018, 23:17
Forum: ESP Easy: General Discussion
Topic: Dynamic SleepMode
Replies: 11
Views: 9726

Re: Dynamic SleepMode

Thanks arion_p. I finaly solved my NTP time problem: a local server was needed for a reliable NTP at start-up. Now I use this Rule: On System#Boot do OLEDCMD,on endon on System#Sleep do OLEDCMD,off if %systime% > 19:00:00 or %systime% < 05:00:00 deepSleep,3600 //60 minutes endif // otherwise let the...
by Domosapiens
16 Mar 2018, 15:38
Forum: ESP Easy: Software
Topic: Stepper Motor
Replies: 36
Views: 49617

Re: Stepper Motor

Strange answer ..
With a small electronic modification and an intelligent A4988 driver you can use the software you asked me for (without overloading the ESP).
As TD-er commented here: https://github.com/letscontrolit/ESPEas ... -373406715
by Domosapiens
15 Mar 2018, 21:05
Forum: ESP Easy: Software
Topic: Stepper Motor
Replies: 36
Views: 49617

Re: Stepper Motor

System design is the right balance between mechanics,electrics and software. I think the A4988 driver is much simpler (1 control signal step ) then the ULN2003 and less load for ESP. 874385874_830-images.jpg The 28BYJ-48 motor can run with the A4988 after a small motor modification: http://2.bp.blog...
by Domosapiens
14 Mar 2018, 18:19
Forum: ESP Easy: Software
Topic: Stepper Motor
Replies: 36
Views: 49617

Re: Stepper Motor

The while loop code contains yield();
So I think it is non-blocking.
Stop? ... just give it a try ;)

My coding skills are more than 40 years old,
so I hardly understood what I have modified.
by Domosapiens
13 Mar 2018, 17:56
Forum: ESP Easy: General Discussion
Topic: Dynamic SleepMode
Replies: 11
Views: 9726

Re: Dynamic SleepMode

Top!
I will give it a try.
Thanks
by Domosapiens
13 Mar 2018, 10:50
Forum: ESP Easy: General Discussion
Topic: Dynamic SleepMode
Replies: 11
Views: 9726

Dynamic SleepMode

I like to measure the sun energy with a SI1145 on a regular interval. It will be a solar powered battery set-up. I prefer a 1 minute sleep cycle for the next measurement during day-time. During night hours this 1 minute cycle is useless and a waste of battery energy. The SleepMode has a static sleep...
by Domosapiens
12 Mar 2018, 22:02
Forum: ESP Easy: Software
Topic: Stepper Motor
Replies: 36
Views: 49617

Re: Stepper Motor

https://we.tl/vjC6hhH6tL
7days means ... 7days :)
by Domosapiens
08 Mar 2018, 14:15
Forum: ESP Easy: General Discussion
Topic: rtttl play on mqtt message?
Replies: 23
Views: 14019

Re: rtttl play on mqtt message?

@Mr Wiki Grovkillen ;)
NTP Hostname Can be left empty as it defaults to pool.ntp.org. Can be changed here if needed.
https://www.letscontrolit.com/wiki/inde ... _interface
by Domosapiens
04 Mar 2018, 20:28
Forum: ESP Easy: Hardware
Topic: Sonoff Basic + wall push button with pilot light
Replies: 21
Views: 16465

Re: Sonoff Basic + wall push button with pilot light

Use the internal pull-up for GPIO14 ?
Or
Use a pull-up resistor of 100K for GPIO14 to 3V3?
by Domosapiens
04 Mar 2018, 20:18
Forum: ESP Easy: Software
Topic: Store Espeasy State
Replies: 9
Views: 7845

Re: Store Espeasy State

Not supported yet in ESPEasy, but nice ;) https://nl.aliexpress.com/item/FM24CLXX-FRAM-Board-FM24CL16-F-RAM-Serial-3-3V-Memory-Evaluation-Development-Kit/753381197.html?spm=a2g0z.10010108.1000016.1.3c31590aJBNRD5&isOrigTitle=true Or .. Wemos D1 with battery shield? In Spain ... maintained by a s...
by Domosapiens
03 Mar 2018, 22:53
Forum: ESP Easy: Hardware
Topic: Wemos D1 Mini flashed but no Access Point
Replies: 4
Views: 4225

Re: Wemos D1 Mini flashed but no Access Point

Power supply problem? During WiFi activity the ESP is power hungry. An USB port is often not delivering enough The Wiki: USB power supply If you want to use a USB charger as a power supply, make sure it has a CE marking and delivers enough current. 1 Ampere is the least. https://www.letscontrolit.co...
by Domosapiens
03 Mar 2018, 11:06
Forum: ESP Easy: Software
Topic: Debugging crashes
Replies: 5
Views: 3796

Re: Debugging crashes

power is providing 400 mA, should be sufficient. I doubt. During WiFi activity the ESP is power hungry. The Wiki: USB power supply If you want to use a USB charger as a power supply, make sure it has a CE marking and delivers enough current. 1 Ampere is the least. https://www.letscontrolit.com/wiki...
by Domosapiens
03 Mar 2018, 10:57
Forum: ESP Easy: Software
Topic: Need some help with a complex rule set...
Replies: 6
Views: 5123

Re: Need some help with a complex rule set...

Check the pairs:
On ...EndOn
If ....EndIf
by Domosapiens
28 Feb 2018, 13:20
Forum: ESP Easy: General Discussion
Topic: Can't connect to ESP unit with static IP
Replies: 19
Views: 16216

Re: Can't connect to ESP unit with static IP

I see a lot of different observations: - can reach / can not reach - some computers can reach / others can not reach - ping time long-short-long-short Wifi transmission is power hungry! Are you sure about your powersupply and cable? ESP8266 development board Is this a Wemos D1 mini? Without branding...
by Domosapiens
27 Feb 2018, 23:38
Forum: ESP Easy: General Discussion
Topic: Can't connect to ESP unit with static IP
Replies: 19
Views: 16216

Re: Can't connect to ESP unit with static IP

3. Windows 10, Google Chrome, ESPEasy webinterface werkt niet.
Lijkt dus een WIN10 probleem.
Probeer eens een ping vanaf die WIN10 computer.
Zijn 192.168.2.5 en 192.168.2.6 wel ping-able vanaf die WIN10 computer?
by Domosapiens
27 Feb 2018, 22:19
Forum: ESP Easy: Software
Topic: Stepper Motor
Replies: 36
Views: 49617

Re: Stepper Motor

Here you go:
https://we.tl/sndfkRec0q
(avail for 7 days)
by Domosapiens
25 Feb 2018, 18:35
Forum: ESP Easy: General Discussion
Topic: Boot time very high
Replies: 5
Views: 6958

Re: Boot time very high

Talking about an official Wemos D1 or a fake ? This is the official: 5-Stks-partij-D1-mini-Mini-Voor-NodeMcu-4-M-bytes-Lua-WIFI-Internet-van-Dingen.jpg From here https://nl.aliexpress.com/item/5PCS-lot-D1-mini-Mini-NodeMcu-4M-bytes-Lua-WIFI-Internet-of-Things-development-board-based/32776267757.html...
by Domosapiens
21 Feb 2018, 20:18
Forum: ESP Easy: General Discussion
Topic: Current monitoring with ESPEasy
Replies: 9
Views: 8208

Re: Current monitoring with ESPEasy

And how about this one? A DC version: https://ae01.alicdn.com/kf/HTB1xkXpMpXXXXXLXpXXq6xXFXXXT/200286647/HTB1xkXpMpXXXXXLXpXXq6xXFXXXT.jpg?size=240143&height=1278&width=1000&hash=fb6d3da8b7cdd93eb0878d0fbdbf1f92 https://nl.aliexpress.com/item/YHDC-SCTD010T-AC-Input-0-5A-DC-Output-0-5V-Sp...
by Domosapiens
17 Feb 2018, 13:22
Forum: ESP Easy: Projects / Applications
Topic: Stepper support request; for curtain automation <€30
Replies: 5
Views: 9660

Re: Stepper support request; for curtain automation <€30

Hello Jazzle, Made some prototype progress, but not that fast. Every design change takes some 20-30 day of waiting for the china post... The Haydon AMETEK-LC1574-W linear stepper motor modified to rotational motor has no torque enough (I could have known!) So I moved over to his one: https://www.eba...
by Domosapiens
16 Feb 2018, 11:23
Forum: ESP Easy: Hardware
Topic: ESPEasy & BME680
Replies: 9
Views: 15756

Re: ESPEasy & BME680

Welcome For BME680 See: https://github.com/letscontrolit/ESPEasyPluginPlayground How to configure? You have to include https://github.com/letscontrolit/ESPEasyPluginPlayground/blob/master/_P119_BME680.ino and compile. How? See Wiki: https://www.letscontrolit.com/wiki/index.php/Main_Page SR501 Motion...
by Domosapiens
12 Feb 2018, 22:45
Forum: ESP Easy: Projects / Applications
Topic: Mistake with the rules?
Replies: 6
Views: 5159

Re: Mistake with the rules?

Most of the time
points towards an unstable situation ....
the buttons are using pin 0 and 9
do they have an external pull-up resistor (around 100KOhm)?
If not, enable the Internal PullUp for GPIO-0 and GPIO-9 in the Switch input Tasks
by Domosapiens
11 Feb 2018, 20:38
Forum: ESP Easy: General Discussion
Topic: rules delay to post vcc on deepsleep
Replies: 36
Views: 21697

Re: rules delay to post vcc on deepsleep

Does this helps?

Code: Select all

On bat#VCC do
 Publish /%sysname%/status,%sysname%_Online
 Publish /%sysname%/bat/VCC,%vcc%
endon
by Domosapiens
11 Feb 2018, 18:44
Forum: ESP Easy: General Discussion
Topic: rules delay to post vcc on deepsleep
Replies: 36
Views: 21697

Re: rules delay to post vcc on deepsleep

VCC#VCC=3.45
IIRC
Rules don't like Taskname and Value name the same
by Domosapiens
11 Feb 2018, 00:57
Forum: ESP Easy: General Discussion
Topic: rules delay to post vcc on deepsleep
Replies: 36
Views: 21697

Re: rules delay to post vcc on deepsleep

Sorry, overlooked that
by Domosapiens
11 Feb 2018, 00:38
Forum: ESP Easy: General Discussion
Topic: rules delay to post vcc on deepsleep
Replies: 36
Views: 21697

Re: rules delay to post vcc on deepsleep

what do others do? Connect Vcc to the A0 analog port If you use Wemos D1 (has an internal 220K/100K divider): Connect Vcc to the A0 analog port via a 100KOhm resistor By adding a 100k , total resistance is 100k+220k+100k=420k. So if the Voltage of a fully loaded Cell would be 4.2 Volt, the ADC of t...
by Domosapiens
09 Feb 2018, 21:19
Forum: ESP Easy: General Discussion
Topic: Global Sync with 20x4 LCD and BME280s - No info displayed on LCD
Replies: 36
Views: 28117

Re: Global Sync with 20x4 LCD and BME280s - No info displayed on LCD

Space in the name of your node? ... Robs LCD in your last pic

RobsLCD as Node name and as Task name?
by Domosapiens
09 Feb 2018, 20:05
Forum: ESP Easy: General Discussion
Topic: Global Sync with 20x4 LCD and BME280s - No info displayed on LCD
Replies: 36
Views: 28117

Re: Global Sync with 20x4 LCD and BME280s - No info displayed on LCD

Apple in your house? Apple uses 65501 for SAN.

In my Inter-ESPEasy set-up (GIT version: v2.0.0-dev12), the "slaved" Tasks on the display node are NOT-Enabled (=red cross)
by Domosapiens
09 Feb 2018, 18:19
Forum: ESP Easy: Hardware
Topic: Sonoff 4CH with ESPEasy
Replies: 151
Views: 163210

Re: Sonoff 4CH with ESPEasy

Good job!
by Domosapiens
09 Feb 2018, 18:16
Forum: ESP Easy: General Discussion
Topic: Global Sync with 20x4 LCD and BME280s - No info displayed on LCD
Replies: 36
Views: 28117

Re: Global Sync with 20x4 LCD and BME280s - No info displayed on LCD

Ohhh latest version of DST....
No experience with that yet (a TD-er contribution)

Advanced tab:
Global sync enabled?
A shared (=same) UDP port selected?
by Domosapiens
09 Feb 2018, 15:30
Forum: ESP Easy: General Discussion
Topic: Global Sync with 20x4 LCD and BME280s - No info displayed on LCD
Replies: 36
Views: 28117

Re: Global Sync with 20x4 LCD and BME280s - No info displayed on LCD

IIRC,
time is important.
Check NTP on, on both.
Compare the time on both.
by Domosapiens
06 Feb 2018, 20:18
Forum: ESP Easy: General Discussion
Topic: Wemos D1 with Wemos OLED shield and buttons.
Replies: 10
Views: 7667

Re: Wemos D1 with Wemos OLED shield and buttons.

If you look here https://wiki.wemos.cc/products:d1_mini_shields:oled_shield this document https://wiki.wemos.cc/_media/products:d1_mini_shields:sch_oled_v2.0.0.pdf Shows Key1 is default connected to D3 (GPIO0) Key2 is default connected to D4 (GPIO2) with the option to solder other connections (SJ3-S...
by Domosapiens
06 Feb 2018, 01:01
Forum: ESP Easy: Hardware
Topic: Sonoff 4CH with ESPEasy
Replies: 151
Views: 163210

Re: Sonoff 4CH with ESPEasy

I-PEX and PSF-A :? :?

Could this solve you problem?
https://nl.aliexpress.com/item/1set-2-4 ... 04091.html
by Domosapiens
28 Jan 2018, 23:04
Forum: ESP Easy: Hardware
Topic: Distance Sensors HC-SR04, JSN-SR04T and more
Replies: 51
Views: 51004

Re: Distance Sensors HC-SR04, JSN-SR04T and more

Sherdan and TD-er ... thanks for your acknowledge.
Opened issue: https://github.com/letscontrolit/ESPEasy/issues/782
by Domosapiens
28 Jan 2018, 13:48
Forum: ESP Easy: Hardware
Topic: Distance Sensors HC-SR04, JSN-SR04T and more
Replies: 51
Views: 51004

Re: Distance Sensors HC-SR04, JSN-SR04T and more

It seems that this PLUGIN_13 from LisaM //####################################################################################################### //#################################### Plugin 013: Ultrasonic Sensors ################################### //################ models: HC-SR04, SRF05, SRF06...
by Domosapiens
21 Jan 2018, 09:56
Forum: Experimental
Topic: The Rig
Replies: 33
Views: 45648

Re: The Rig

by Domosapiens
20 Jan 2018, 20:34
Forum: uPyEasy: General Discussion
Topic: Blockly Events
Replies: 21
Views: 29756

Re: Blockly Events

Great Lisa !
Programming is soooo 1980 ;)
by Domosapiens
20 Jan 2018, 13:36
Forum: ESP Easy: Software
Topic: Error with compiling of board WeMos d1 r2 mini
Replies: 5
Views: 6949

Re: Error with compiling of board WeMos d1 r2 mini

bin file is being created in the .pioenvs folder within the project folder
by Domosapiens
20 Jan 2018, 12:22
Forum: ESP Easy: Hardware
Topic: Connecting a TM1637 4-Digit Display
Replies: 217
Views: 1270016

Re: Connecting a TM1637 4-Digit Display

@Papperone,
hope you can do it.
It would be a major break-trough: using PCFGPIO's as generic GPIO's.
(f.i. also for HC-SR04 distance measurement, IR Transmit etc.)
Thanks in advance !
by Domosapiens
19 Jan 2018, 23:59
Forum: ESP Easy: Hardware
Topic: Connecting a TM1637 4-Digit Display
Replies: 217
Views: 1270016

Re: Connecting a TM1637 4-Digit Display

@Papperone,

thanks for this plug-in.
Is it possible to combine this plug-in with a PCF8574 I/O expander ?
A quick test of the mega release ESPEasy_mega-20180119 showed only the regular GPIO's and not the PCFGPIO's from PCF8574.
Thanks for your response.
Domosapiens
by Domosapiens
19 Jan 2018, 19:48
Forum: Experimental
Topic: The Rig
Replies: 33
Views: 45648

Re: The Rig

I like to reward the team for all their work, but ..
Sorry, this is too complicated and too much waste.
- PayPal redirection does not work
- 21% VAT goes to ???
Please open just a PayPal account for gifts.
by Domosapiens
11 Jan 2018, 17:07
Forum: ESP Easy: Projects / Applications
Topic: MQTTImport and use of formula
Replies: 4
Views: 3939

Re: MQTTImport and use of formula

Vaguely remember this ... using (...)

Code: Select all

on DimmerImport#Level do
   PWM,14,([DimmerImport#Level]*1024/100),1250
endon
by Domosapiens
11 Jan 2018, 10:45
Forum: ESP Easy: General Discussion
Topic: Number of Devices / Tasks limited to 12 ?
Replies: 36
Views: 30280

Re: Number of Devices / Tasks limited to 12 ?

Change TASKS_MAX in ESPEasy.ino and recompile
See hexemeister's suggestion to prevent data structure overlapping...
https://github.com/letscontrolit/ESPEas ... -344511468
by Domosapiens
05 Jan 2018, 00:14
Forum: ESP Easy: Projects / Applications
Topic: Building a WiFi weatherstation
Replies: 2
Views: 3304

Re: Building a WiFi weatherstation

Without a screenshot, it is just an assumption,
But I assume you swapped the values.

First field is what you measure, second field is what it means.
The sign in the middle means "equals"

So your values should be:
0.375 ... 0
1.000 ... 15

Hope this helps
Domosapiens
by Domosapiens
04 Jan 2018, 21:07
Forum: ESP Easy: Software
Topic: Esp easy update temperature to domoticz generate a reboot
Replies: 6
Views: 5641

Re: Esp easy update temperature to domoticz generate a reboot

Tixav, you could try the second controller position for Domoticz and leave the first one empty. I had in the past some problems with out of bound memory write to the data area of the first controller. Just my 2 cents, Domosapiens Note: If this helps, it could be related to how memory allocation for ...
by Domosapiens
03 Jan 2018, 12:04
Forum: ESP Easy: General Discussion
Topic: ESPEasy v2.0.0-dev13
Replies: 39
Views: 38750

Re: ESPEasy v2.0.0-dev13

Happy New Year and ..
Congrats to Edwin and ESP Easy contributors