Search found 3609 matches

by Ath
08 Aug 2020, 21:25
Forum: ESP Easy: Hardware
Topic: Sonoff as wall plug
Replies: 6
Views: 11369

Re: Sonoff as wall plug

Those very compact plugs are usually quite hard to disassemble in a way they can be safely re-assembled later. It seems to suggest in the picture it is tuya based, meaning that alternative firmware is possible, but I've never tried to flash ESPEasy in that way. (A tuya update tool can be found by th...
by Ath
06 Aug 2020, 11:40
Forum: ESP Easy: Hardware
Topic: Shelly Dimmer
Replies: 6
Views: 9559

Re: Shelly Dimmer

And you seem to have gpio0 hard-wired to gnd? I ground it during reset, hold it down for a few more seconds, then release it.

You already have a nice breadboard in use, you could easily add a couple of buttons for reset and 'pgm' 8-)
by Ath
06 Aug 2020, 11:33
Forum: ESP Easy: Projects / Applications
Topic: P095 With 1.4 TFT shield
Replies: 2
Views: 11643

Re: P095 With 1.4 TFT shield

P095 is meant to drive a ILI9341, not the ST7735s, and I'm not sure how compatible these chips are.

The TS_CS should be a chip-select signal, to be able to have multiple displays on the same SPI bus, but I don't know if that is supported by ESPEasy (don't own that type of display, so can't test)
by Ath
06 Aug 2020, 11:24
Forum: ESP Easy: General Discussion
Topic: Working with rules, makes ESPEasy prompt for password
Replies: 4
Views: 5887

Re: Working with rules, makes ESPEasy prompt for password

Are you using a SysLog server? That seems to cause issues with some ESP's or configurations. You could try switching that off.
by Ath
05 Aug 2020, 20:32
Forum: ESP Easy: General Discussion
Topic: Timer adds additional 1 second delay
Replies: 13
Views: 17966

Re: Timer adds additional 1 second delay

If you could connect the LED on a standard GPIO port, then you could use the

Code: Select all

longpulse_ms,<GPIO>,<state>,<duration>
command to turn it on for a number of milliseconds, using a higher resolution timer.
by Ath
05 Aug 2020, 20:26
Forum: ESP Easy: General Discussion
Topic: Timer adds additional 1 second delay
Replies: 13
Views: 17966

Re: Timer adds additional 1 second delay

After installing the latest release from https://github.com/letscontrolit/ESPEasy/releases on your device, you might also read this thread about the 'accuracy' of the timers: https://www.letscontrolit.com/forum/vie ... f=2&t=7849
by Ath
05 Aug 2020, 19:54
Forum: ESP Easy: Projects / Applications
Topic: Clock#Time versus %systime% on certain days
Replies: 10
Views: 15224

Re: Clock#Time versus %systime% on certain days

Time problem for Presence simulation on Light#Lux do if [Light#Lux] < 25 and %systime% < 23:15:00 and %systime% > 16:30:00 GPIO,2,0 elseif [Light#Lux] < 35 and %systime% < 7:30:00 and %systime% > 6:30:00 GPIO,2.0 else GPIO,2,1 endif endon on dummy#switch=0 do event,lightoff on dummy#switch=1 do eve...
by Ath
05 Aug 2020, 17:07
Forum: ESP Easy: Hardware
Topic: Shelly Dimmer
Replies: 6
Views: 9559

Re: Shelly Dimmer

Have you tried swapping RX and TX?
Some tend to document it as a 1:1 connection, instead of a TX -> RX and RX -> TX (crossed) connection.

It doesn't hurt the unit if you had them connected in the wrong way, AFAIK
by Ath
02 Aug 2020, 22:37
Forum: ESP Easy: General Discussion
Topic: Analog mqtt message does not have unit number
Replies: 7
Views: 7200

Re: Analog mqtt message does not have unit number

We would appreciate if you could share the details, please.
by Ath
02 Aug 2020, 19:13
Forum: ESP Easy: General Discussion
Topic: Can't see device from playground plugin
Replies: 7
Views: 5959

Re: Can't see device from playground plugin

SendToHTTP 172.19.0.63,80,/json.htm?type=command&param=udevice&idx=1009&nvalue=0&svalue=[SI1145#UV] That smells like you are using Domoticz, right? You should be able to use the Domoticz HTTP or MQTT controllers to send that data there. After setting up the controller, you should on...
by Ath
02 Aug 2020, 17:44
Forum: ESP Easy: General Discussion
Topic: Can't see device from playground plugin
Replies: 7
Views: 5959

Re: Can't see device from playground plugin

Ehm, since release mega-20200426, the ILI9341 plugin has been included as P095, but I'm not sure if it is included in any of the standard builds (it's quite large when all libraries are linked in). You could suffice with just enabling it in define_plugin_sets.h for the PLUGIN_SET_TESTING or add it t...
by Ath
02 Aug 2020, 15:59
Forum: ESP Easy: General Discussion
Topic: Can't see device from playground plugin
Replies: 7
Views: 5959

Re: Can't see device from playground plugin

Have you added #define USE_CUSTOM_H somewhere in your source or in your build environment?
by Ath
01 Aug 2020, 16:53
Forum: ESP Easy: Hardware
Topic: PCD8544 - Nokia 5110/3310 LCD - beta plugin
Replies: 88
Views: 140851

Re: PCD8544 - Nokia 5110/3310 LCD - beta plugin

Then don't worry! I just won't be using these displays with espeasy. I will attach them to arduino. The advantage of these displays over the OLed displays is that they are a bit larger, thus easier to read from some 'distance' (~1 meter), while an average OLed requires me to be within ~60 cm to be ...
by Ath
01 Aug 2020, 15:14
Forum: ESP Easy: Hardware
Topic: PCD8544 - Nokia 5110/3310 LCD - beta plugin
Replies: 88
Views: 140851

Re: PCD8544 - Nokia 5110/3310 LCD - beta plugin

I have two such displays. I would like to use them in ESPeasy. Maybe someone will give me a fresh build, including a plugin for NOKIA5110? Well, it's a bit hard (for me at least) to create a build, for a couple of reasons. a) It is an older plugin, and uses no longer supported functions and objects...
by Ath
30 Jul 2020, 19:52
Forum: ESP Easy: General Discussion
Topic: ESP8266 does not control LEDs, buzzers. Syntax Error
Replies: 6
Views: 6050

Re: ESP8266 does not control LEDs, buzzers. Syntax Error

What version of ESPEasy is installed on your board?
by Ath
28 Jul 2020, 08:03
Forum: ESP Easy: Hardware
Topic: Sonoff T0EU2C support
Replies: 13
Views: 25936

Re: Sonoff T0EU2C support

Any time sofar that I encountered issues like that, my wiring was broken (I tend to use patch wires for that), so you might want to check or replace your wiring.
by Ath
27 Jul 2020, 21:29
Forum: ESP Easy: Software
Topic: New rules, about RULES for using " or '
Replies: 1
Views: 5319

Re: New rules, about RULES for using " or '

Have you read this support issue: https://github.com/letscontrolit/ESPEasy/issues/2724 ? You have your quotes mixed up, no need to combine ' and " around a single token. something like this, copied from your post and quoted as intended Publish homebridge/to/set,'{"name":"ESP62.Le...
by Ath
25 Jul 2020, 13:32
Forum: ESP Easy: General Discussion
Topic: Analog mqtt message does not have unit number
Replies: 7
Views: 7200

Re: Analog mqtt message does not have unit number

A few more questions:
- What version (.bin filename is the most informative) of ESPEasy do you have installed on your ESP's?
- What type of ESP's do you have, ESP8266 or ESP32?
by Ath
24 Jul 2020, 08:03
Forum: ESP Easy: Hardware
Topic: Dust Sensor SDS011 Reading too low
Replies: 9
Views: 17079

Re: Dust Sensor SDS011 Reading too low

Due to the nature of the sensor it seems appropriate to ask if you cleaned it, before putting it back to use?
These kind of sensors seem quite sensitive, and excessive dust inside the sensor sounds like a plausible cause of malfunctioning.
by Ath
21 Jul 2020, 20:35
Forum: ESP Easy: General Discussion
Topic: Send temp value to other ESP before sleep
Replies: 3
Views: 5588

Re: Send temp value to other ESP before sleep

You can go 3 ways to have the temperatures sent from the TempEsp to the OLedEsp: Use SendToHttp ( the most generic and independent* ) Use the Inter-ESPEasy network ( the easiest to use* ) Use the ESPEasy P2P Networking controller ( a bit finicky but quite doable* ) (* that is my opinion , not a verd...
by Ath
19 Jul 2020, 20:29
Forum: ESP Easy: Projects / Applications
Topic: Project: Shelly 1PM with HW patch
Replies: 10
Views: 22056

Re: Project: Shelly 1PM with HW patch

Well, as said, I mostly took up this project to try and apply the hardware 'patch' on the shelly, and even though I still can't measure voltage and current, the original challenge succeeded for most part. Voltage and current would have been 'nice to have', but I can live without it :) I haven't been...
by Ath
19 Jul 2020, 14:37
Forum: ESP Easy: Projects / Applications
Topic: Project: Shelly 1PM with HW patch
Replies: 10
Views: 22056

Re: Project: Shelly 1PM with HW patch

When looking at the shunt (first photo, above) it most likely has a 1 mOhm resistance, at least the print on R20 can be read as '0.1'. That is also the defined value in the source, and should result in the correct factor. My multimeter isn't accurate enough to effectively measure that kind of resist...
by Ath
19 Jul 2020, 09:58
Forum: ESP Easy: Projects / Applications
Topic: Project: Shelly 1PM with HW patch
Replies: 10
Views: 22056

Re: Project: Shelly 1PM with HW patch

I'm pretty confident the bulb doesn't have a switching powersupply, but I don't think it's halogen either, that may be from my imagination, or some text on the box it came in, I can't recall that, and the box went down the paper 'archive'.
It's this closeup:
20200719_095212.jpg
20200719_095212.jpg (1.71 MiB) Viewed 21954 times
by Ath
18 Jul 2020, 13:52
Forum: ESP Easy: Projects / Applications
Topic: Project: Shelly 1PM with HW patch
Replies: 10
Views: 22056

Re: Project: Shelly 1PM with HW patch

Are you certain about the correct factor for the power? Well, with a 53 watt 'eco' bulb (halogen) I got a power value of around 180, so I corrected for that. The other values are the sensor defaults. Quite often those power measurement chips only output the VA and not the power in Watt. So they don...
by Ath
12 Jul 2020, 22:19
Forum: ESP Easy: Projects / Applications
Topic: Project: Shelly 1PM with HW patch
Replies: 10
Views: 22056

Project: Shelly 1PM with HW patch

I recently bought me a Shelly 1 PM WiFi switch with the intention of using the Power, Voltage and Current measurements. After receiving the aparatus, I realized I didn't do my due diligence properly, as this specific device doesn't actually support Voltage and Current measuring :o Luckily, a user of...
by Ath
07 Jul 2020, 13:07
Forum: ESP Easy: General Discussion
Topic: Log: Tail possible
Replies: 9
Views: 16155

Re: Log: Tail possible

Well, you can open an extra browser-tab with the log, and do your action(s) in the initial tab, the log-update should continue
by Ath
25 Jun 2020, 17:15
Forum: ESP Easy: General Discussion
Topic: Flashing esp wroom- 32 espeasy
Replies: 15
Views: 28884

Re: Flashing esp wroom- 32 espeasy

TD-er wrote down a procedure to flash ESP32 boards here: https://www.letscontrolit.com/forum/viewtopic.php?f=5&t=7697&p=44667&hilit=esp32+flash#p44622 You shouldn't use the download from that post, as they are a bit 'old' now, you'd better get the latest from the releases page I linked a...
by Ath
25 Jun 2020, 13:12
Forum: ESP Easy: General Discussion
Topic: Flashing esp wroom- 32 espeasy
Replies: 15
Views: 28884

Re: Flashing esp wroom- 32 espeasy

momo3000 wrote: 25 Jun 2020, 12:28 Where i can find default factory bin files?
They are included in recent builds of ESPEasy, in the bin directory. Latest releases can be found here: https://github.com/letscontrolit/ESPEasy/releases
by Ath
24 Jun 2020, 21:36
Forum: ESP Easy: General Discussion
Topic: Flashing esp wroom- 32 espeasy
Replies: 15
Views: 28884

Re: Flashing esp wroom- 32 espeasy

Hi, welcome to the forum! Most ESP32 boards have 2 buttons, one usually labeled Boot or B and one Reset or EN. To go into flash mode, press and hold the Boot button, and then press the Reset button shortly (about half a second is fine). I usually hold the Boot button for a few more seconds, and then...
by Ath
22 Jun 2020, 21:58
Forum: ESP Easy: Projects / Applications
Topic: repetitive logs in domoticz
Replies: 1
Views: 11044

Re: repetitive logs in domoticz

How do you think it can be configured so that if there is no change of state then there is only one record in the log? Well, that is completely against the nature of logging. Logging is to be sent out of, and away from, a system or application, to prevent being compromised when that system/applicat...
by Ath
21 Jun 2020, 19:03
Forum: ESP Easy: Projects / Applications
Topic: which solution to remote control ESP by phone ?
Replies: 4
Views: 14548

Re: which solution to remote control ESP by phone ?

First a warning: Don't make ESP devices running ESPEasy directly accessible from the internet (you have probably read that before on this forum, I just want to emphasize it again). At lease include some type of VPN or other secure remote control option. The limited security that is available in ESPE...
by Ath
14 Jun 2020, 20:14
Forum: ESP Easy: Software
Topic: ESP Easy FW Dec.2019 Vs. June 2020 FW
Replies: 2
Views: 5533

Re: ESP Easy FW Dec.2019 Vs. June 2020 FW

With the newer ESPEasy versions, you might want to uncheck the 'Append Unit Number to hostname' option on the Config page.
by Ath
14 Jun 2020, 20:10
Forum: ESP Easy: Software
Topic: Wemos D1 reboots every minute
Replies: 6
Views: 7047

Re: Wemos D1 reboots every minute

You say you changed the ip-address, does that mean you sent data to a non-existing ip with the sendtohttp command? If so, it could explain the reboots, as sendtohttp waits for an ack from the destination, but as that doesn't respond, the watchdog timer forces a reboot as the unit is not responding d...
by Ath
07 Jun 2020, 20:00
Forum: ESP Easy: Projects / Applications
Topic: ADS1115 as Switch Input
Replies: 4
Views: 12369

Re: ADS1115 as Switch Input

Ah, I already was afraid you were going to say something like that :D When you tried to modify the plugin, did you add 'case PLUGIN_TEN_PER_SECOND:' just above the line with 'case PLUGIN_READ:' so the values are read 10 times per second, and if the response is (still) too slow, you could even try PL...
by Ath
07 Jun 2020, 16:18
Forum: ESP Easy: Projects / Applications
Topic: ADS1115 as Switch Input
Replies: 4
Views: 12369

Re: ADS1115 as Switch Input

What other I/O boards do you have laying around? Maybe a MCP23017? With that controller you can connect up to 16 buttons (and AFAIR 12 for the PCF8574) when using the Keypad PCF8574/MCP23017 plugin from the Testing build. It may need some careful wiring if the switches aren't close to the controller...
by Ath
07 Jun 2020, 14:28
Forum: ESP Easy: General Discussion
Topic: syntax question
Replies: 27
Views: 52940

Re: syntax question

Not sure if then the [MCP#n] variables can be used? AFAICS that's not possible, as [var#name] is referring to Device names and variables. We could use the 16 custom variables for that, something like this: on mcp#18 do let 1,%eventvalue% Event,triggering=%v1%,%v2%,%v3% endon on mcp#17 do let 2,%even...
by Ath
07 Jun 2020, 14:04
Forum: ESP Easy: General Discussion
Topic: syntax question
Replies: 27
Views: 52940

Re: syntax question

To me it is at least 'strange' that the event is fired without any values, only the commas, do you have a screenshot of your Devices page, showing the MCP settings?
by Ath
06 Jun 2020, 20:25
Forum: ESP Easy: General Discussion
Topic: syntax question
Replies: 27
Views: 52940

Re: syntax question

Hm, the if doesn't have a do, it's just the if and a condition/test, you might want to read the documentation on that again: https://espeasy.readthedocs.io/en/lates ... Rules.html
by Ath
06 Jun 2020, 19:30
Forum: ESP Easy: General Discussion
Topic: syntax question
Replies: 27
Views: 52940

Re: syntax question

You need to add [ and ] around the variable(s) in the 'if' lines, (but not in the 'on' lines).
by Ath
02 Jun 2020, 20:22
Forum: ESP Easy: Software
Topic: command LongPulse: possible to pulse between state 0 and state 2?
Replies: 10
Views: 9030

Re: command LongPulse: possible to pulse between state 0 and state 2?

Is my relay board so special? Well, most likely the high value (1) of the ESP, working on 3.3V, isn't high enough to be recognized as high by the 5V input of your relay board. Quite good described in this Hackaday article You could add level shifters between the ESP and the inputs to resolve this, ...
by Ath
31 May 2020, 14:39
Forum: Experimental
Topic: E-paper on batteries
Replies: 6
Views: 29749

Re: E-paper on batteries

Great results so far!

Btw: Are those numbers anything real, like from a PV installation, or just something random?
by Ath
31 May 2020, 12:21
Forum: ESP Easy: Software
Topic: TaskValueSet and unit of measurement
Replies: 7
Views: 8406

Re: TaskValueSet and unit of measurement

Didn't add the L/l transformation, but R/r as that's in line with the other transformations (using the first letter of the 1-state value, where possible, and Left/Right seems more appropriate then Right/Left) Had to resort to the L/l transformations, as R is an already existing transformation, that...
by Ath
29 May 2020, 20:09
Forum: ESP Easy: Software
Topic: TaskValueSet and unit of measurement
Replies: 7
Views: 8406

Re: TaskValueSet and unit of measurement

I created a PR for just this small feature: https://github.com/letscontrolit/ESPEasy/pull/3094 Didn't add the L/l transformation, but R/r as that's in line with the other transformations (using the first letter of the 1-state value, where possible, and Left/Right seems more appropriate then Right/Le...
by Ath
29 May 2020, 07:48
Forum: ESP Easy: Software
Topic: HTTP control without password???
Replies: 7
Views: 5114

Re: HTTP control without password???

Edit:
So I stepped into a spammer trap. :( Removed the reply.
by Ath
29 May 2020, 07:29
Forum: ESP Easy: General Discussion
Topic: Read data from domoticz
Replies: 3
Views: 6253

Re: Read data from domoticz

Ton_vN wrote: 28 May 2020, 23:14 ...what is the script & function you have in mind as destination for this temperature-data?
Good question!

As this is posted in the ESPEasy forum, I'm assuming this is asked to get the temperatures, probably shown on some display connected to an ESP board. ;)
by Ath
28 May 2020, 21:54
Forum: ESP Easy: Software
Topic: TaskValueSet and unit of measurement
Replies: 7
Views: 8406

Re: TaskValueSet and unit of measurement

two seconds later, I'll hand over Hm, why would you use 1 dummy variable to display 2 different values? Well, ok, it's possible :D Assuming you have 2 separate events where that is happening, you could set an extra dummy variable (Dummy2 / Direction) for the direction, and use a transformation on t...
by Ath
28 May 2020, 21:27
Forum: ESP Easy: General Discussion
Topic: Read data from domoticz
Replies: 3
Views: 6253

Re: Read data from domoticz

Most advised way is to install a MQTT broker next to Domoticz (Mosquitto is often used on the 'default' Domoticz RPi configuration), and use the MQTT Import plugin to fetch the values from Domoticz.
by Ath
25 May 2020, 21:37
Forum: ESP Easy: Software
Topic: Only 3 of 4 possible Counters are functional
Replies: 12
Views: 31940

Re: Only 3 of 4 possible Counters are functional

Have you tried to configure the counter in a Device slot other than 4? There has been a report here that the 4th device wasn't counting, for as of yet unknown reasons (AFAIR), maybe this is also the case here.
by Ath
24 May 2020, 16:56
Forum: ESP Easy: Hardware
Topic: Esp connects only with Wifi after flashing
Replies: 4
Views: 9340

Re: Esp connects only with Wifi after flashing

Well, we'll need a bit more info then. - What version of ESPEasy was initially installed? - What version of ESPEasy do you have installed now? - What short-circuited that made it stop working? - What plugins do you have active? - And how are the sensors for these plugins connected? (wiring-type + gp...
by Ath
24 May 2020, 16:06
Forum: ESP Easy: Hardware
Topic: Esp connects only with Wifi after flashing
Replies: 4
Views: 9340

Re: Esp connects only with Wifi after flashing

Koenig wrote: 24 May 2020, 16:03 The power supply is perfect, that cannot be the problem.
Well, to be really, really sure, can you try another power supply?, as, from where I'm looking, it seems it is not proving sufficient power to your ESP...