I did what you suggested Ath but doesn't work. to make is sure :) - I plug USB to PC - I plug USBC to ESP - I press and hold boot button - I press and release rst button - I go on chrome and url web flash, I select 20231225 Normal 4M Little FS ESP32,ESP32-S2/C2/C3/C6 - I do connect - I select port 3...

thanks again for your avalaibility and reactivity. so for the C3, I did nothing with pin, just plug the board on USB and launch Web flasher, I confirm install normal 4M little FS, then erase device, then install and I got the following message: Failed to initialize. Try resetting your device or hold...

for the esp32 C3 super mini I read that doc: https://docs.espressif.com/projects/esptool/en/latest/esp32c3/advanced-topics/boot-mode-selection.html The ESP32-C3 will enter the serial bootloader when GPIO9 is held low on reset. Otherwise it will run the program in flash. GPIO8 must also be driven Hig...

thanks a lot @Ath for your support. It went well for the ESP 01 but may be there is an default, because I lost the connection and when un plug it on the relay board https://www.temu.com/fr/kuiper/n9.html?subj=googleshopping-landingpage&_bg_fs=1&_p_rfs=1&_x_ads_channel=google&_x_ads_s...

thanks a lot for the reply.
I didnn't know this url, it's awesome :https://td-er.nl/ESPEasy/

I tried to flash with 20231225 normal 1M ESP8266, flashing OK but nothing then, not ssid appeared.

I have alors ESP32 C3 mini, but It didn't work although I put GPIO9 to GND.

If you have any clue :=)

Hello all, A ma facing an issue for now 2 weeks. I have this board, https://www.letscontrolit.com/wiki/index.php?title=ESP-01 I don't see any puya mark on it. I triyed to flash it with esptool and firmware r120. everything seems ok but unable to see ssid ESP_0 or ESP_Easy_0. So I tired to add the ne...