Let's Control It

obstbauer

it works!
Thanks a lot !

obstbauer

Hello, I try to control a fan with measured humdity, PWM and rules but I don't find a working solution. I know how to do it with python or C but I have problems to understand the rules logic. I want to control: Humid < 50 PWM 300 Humid >51 and <61 PWM 700 Humid >61 and < 70 PWM 900 Humid > 70 PWM 10...

obstbauer

the sonoff adapter is for tasmota And I started with tasmota and then I made first tries with ESP Easy and the esp easy devices worked with this sonoff adapter so I did not expected that there is a problem it seems to work with values from hardware (because I only worked with temperature and humidit...

obstbauer

ok problem solved....

I had no real mqtt server installed for iobroker
I always used the sonoff adapter to get the values and it works with my other esp01 and esp32 devices
I don't know why but I get the values
I installed now the mqtt server adapter and now I get the adc values

obstbauer

@ Ath:

Sorry I don't understand what you mean?
I have some ESP_Easy devices running and the values are shown in my iobroker with mqtt like this:

on the pictures above you can see that with my adc problem device the values are not shown and there is no option to find or see the values?

obstbauer

I made a test with a second Lolin NodeMCU V3 board and with the free RAM measurement and it is the same problem
the mqtt connection is ok with both boards but no values only indicator reachable true....

obstbauer

this is the entry:

obstbauer

no other idea?
It is sad because I cannot use this bord for logging my pressures

obstbauer

Yes send to Controller is enabled

obstbauer

I use the A0 pin ?
I Think this board has only one ADC ?

obstbauer

I erased the device and installed the Build: ESP_Easy_mega_20231013_normal_ESP8266_4M1M Oct 13 2023
the pressure measurement works fine but I have exactly the same problem only the indicator.reachable signal true arrives iobroker but no values ???

obstbauer

ok, I will try it
there is no blank 4_M filge available?

https://td-er.nl/ESPEasy/

obstbauer

I have additionally a wemos S2 mini running and communication with iobroker is no problem too
with the same settings in the controler

obstbauer

subnet is the same
all esp have different IDs
you can see on my screenshot above that the iobroker see the ESP but there are no value so in principle comunication is available

obstbauer

subnet is the same
all esp have different IDs
you can see on my screenshot above that the iobroker see the ESP but there are no value so in principle comunication is available

obstbauer

with 1000 ms same problem

obstbauer

I have three ESP01 which all sent their data to iobroker without problems
and I use the same settings of them for this devide so I don't think that the controler setup is a problem?

obstbauer

no
no values are shown
only indicator reachable on the picture I posted

obstbauer

no idea ?

obstbauer

mh, ok.. then there is still another problem why I don't see the value in iobroker

obstbauer

sensor appears but no values

obstbauer

do I need all files or only the "upd_values_device_page.js" file?

Because I can see the values now on the esp web interface but I don't see the values in iobroker
the other esp devices are sending the values to iobroker

obstbauer

it works, thank you
now I can see the values

obstbauer

ok, this is a 4 MB Lolin NodeMCU V3.
Would it be better to make a firmware update with the newest version ?
now it is ESP_Easy_mega_20230507_normal_ESP8266_4M1M May 7 2023

obstbauer

this post was from me too
with my ESP01 it works now

but here I have another problem, the web interface looks normal, the measurements shows right values but not on the page I showed

obstbauer

yes it worked

Thank you!

obstbauer

I uploaded "upd_values_device_page.js" but it doesn't work

obstbauer

ok I uploaded all files but it doesn't work

should I delete the "update_sensor_values_device_page.js" file ?
and upload the renamed file again ?

obstbauer

is it right what I wrote ?

obstbauer

you mean

"File browser Show files on internal flash file system"

and then upload the *.js files?

Thank you for the help!

obstbauer

there are no issues in the console
I tested with chrome firefox and Edge

I checked the options, Javascript is enabled for websites

obstbauer

ok... bad... I work now with s2 minis maybe I change my ESP01 with them For my understanding: What happened that it worked before with the normal web interface and now it doesn't wortk anymore? As I mentioned if I connect the first time via AP I always have the simple look and after connecting with ...

obstbauer

"Are you sure the JavaScript files are active for refreshing the devices page?"
How can I check this ?

obstbauer

I added a task and I have the same problem
no values like free Ram etc. are shown

obstbauer

I use Build: ESP_Easy_mega_20230507_normal_ESP8266_4M1M May 7 2023 I guess without VCC But the measurement is working? I get correct values. The controller configuration is the same as in the other devices which work "Are you sure the JavaScript files are active for refreshing the devices page?...

obstbauer

Hello,
I read a pressure sensor with ESP_EASY on a Lolin NodeMCU V3. The reading works and I can see the correct pressure.
I want to send the values to iobroker. MQTT is working (I use it with other ESP_Easy devices) but I get no values?

What is wrong with my configuration?
Thank you!
Regards
Thomas

obstbauer

Hello, thank you for the answers! I am new so I don't understand everything. What does that mean for me? What should I change? "It seems like when a build was made without pygit2 installed as Python library, you do end up with a CDN url without a Git tag in the URL. And it looks like jsdelivr i...

obstbauer

Hello, what is the reason that the web interface of some of my ESP 8266 devices look like the picture below and not like the normal design? I know this simple web interface from connecting the first time via access point, afte connecting with my wifi the normal design is shown but now I have the sim...

obstbauer

sorry for my late answer now it works for me with the firmware you mentioned @ Ath: thank you! At the moment I am fine with the ESP-01 because I only want to read out a BME280 Chip and I need it three times for different places There is only one small problem: I don't understand why my wifi settings...

obstbauer

I think I wrote my topic to the wrong software forum

Can you please move it ? Thank you! It should be in ESP Easy: Software

obstbauer

Hello, I want to use an ESP-01S with 1 Mb Memory board 8266 with ESPEasy and I don't know which firmware version I should use for installation? I would like to use a version like this "ESPEasy_mega-20230508_normal_ESP8266_1M.bin" This version is mentioned on the github page and make sense ...

Search found 41 matches