This is a thread that I got regarding somfy blinds
viewtopic.php?t=3399
I am not sure whether your one is supported by rflink or not.
Search found 107 matches
- 06 May 2024, 16:54
- Forum: RFlink: General Discussions
- Topic: Basic instructions to get blinds connected to RFLink
- Replies: 3
- Views: 98
- 27 Apr 2024, 21:39
- Forum: ESP Easy: Projects / Applications
- Topic: Air Quality unit - which devices are best?
- Replies: 75
- Views: 6202
Re: Air Quality unit - which devices are best?
Here is ESP Room SmartMonitor V3. This design may give you a reference. https://www.pcbway.com/project/shareproject/ESP_Room_SmartMonitor_V3_8a9e5a39.html It uses DHT22 (Temperature and humidity sensor) and BH1750 light sensor. For dust sensor, you can use PMSx003 modules. https://espeasy.readthedoc...
- 29 Mar 2024, 14:58
- Forum: RFLink: Nederlands support forum
- Topic: Problemen met 868 MHZ (Egardia/Woonveilig)
- Replies: 9
- Views: 719
Re: Problemen met 868 MHZ (Egardia/Woonveilig)
Voordat u een voeding selecteert, kijkt u goed naar de specificaties van de RFlink.
- 29 Mar 2024, 14:15
- Forum: ESP Easy: Software
- Topic: EasyFetch mini Dashboard, buttons and columns
- Replies: 5
- Views: 723
Re: EasyFetch mini Dashboard, buttons and columns
It's not entirely clear what counts as a "tile" in your context. Would you please elaborate a bit more?
- 29 Mar 2024, 14:05
- Forum: RFLink: Nederlands support forum
- Topic: Problemen met 868 MHZ (Egardia/Woonveilig)
- Replies: 9
- Views: 719
Re: Problemen met 868 MHZ (Egardia/Woonveilig)
Hallo, welke voeding gebruik je voor de RFlink? Soms veroorzaakt een onvoldoende stroomvoorziening dergelijke problemen.
- 29 Mar 2024, 13:58
- Forum: ESP Easy: Projects / Applications
- Topic: Air Quality unit - which devices are best?
- Replies: 75
- Views: 6202
Re: Air Quality unit - which devices are best?
Using a PCB (printed circuit board) does indeed sound like a sleek solution for your setup! Typically, the PCB would be integrated with the ESP, providing a compact and organized platform for your electronics. As for the sensors (SEN55 and S8) positioned on the wall of the housing, you can incorpor...
- 27 Mar 2024, 15:33
- Forum: ESP Easy: Projects / Applications
- Topic: KY-037 KY-038 sound sensor for traffic counting
- Replies: 5
- Views: 2180
Re: KY-037 KY-038 sound sensor for traffic counting
Here are some more approaches for traffic counting and traffic control. You can implement these and see if you get better results than the sound sensor. If you compare the performances, it may help you select the proper components for your final design. https://www.hackster.io/lintangwisesa/iot-traf...
- 07 Mar 2024, 19:16
- Forum: ESP Easy: Hardware
- Topic: Is it possible to use LCDs with ST7735&ST7739 controllers??
- Replies: 42
- Views: 27583
Re: Is it possible to use LCDs with ST7735&ST7739 controllers??
If you ever think of switching to any other display, you can choose the TFT 2.4 inches ILI9341/XPT2046 or TFT ILI934x/ILI948x: https://www.theengineeringprojects.com/2024/02/color-lcd-screens-as-a-versatile-solution-for-a-number-of-applications.html These are compatible with Espeasy: https://espeasy...
- 07 Mar 2024, 17:32
- Forum: ESP Easy: Hardware
- Topic: Is it possible to use LCDs with ST7735&ST7739 controllers??
- Replies: 42
- Views: 27583
Re: Is it possible to use LCDs with ST7735&ST7739 controllers??
ST7735 is compatible with ESPeasy. Here I found this document: https://espeasy.readthedocs.io/en/lates ... /P116.html
- 26 Feb 2024, 16:30
- Forum: ESP Easy: Software
- Topic: Embed css and js files in custom builds?
- Replies: 2
- Views: 901
Re: Embed css and js files in custom builds?
Convert your CSS and JavaScript files into byte arrays. You can do this manually by converting the contents of each file into a C or C++ array of bytes. Include these byte arrays in your codebase, typically in a separate header file (e.g., custom.h).
- 26 Feb 2024, 16:24
- Forum: RFlink: General Discussions
- Topic: [BUG] WIND label is new and incorrect R51
- Replies: 1
- Views: 939
Re: [BUG] WIND label is new and incorrect R51
According to the RFLink protocol reference, the correct label for wind speed should be "WINSP" instead of "WIND." So, you're right in thinking that "WIND" needs to be replaced by "WINSP."
Code: Select all
20;70;TFA;ID=0ade0d;WINSP=0011;
- 26 Feb 2024, 16:22
- Forum: ESP Easy: Software
- Topic: IR read/write head TTL for electricity meters
- Replies: 1
- Views: 755
Re: IR read/write head TTL for electricity meters
ESP_Easy_mega_20221224_normal_ESP8266_4M1M_VCC should work fine for your application. Just ensure that it supports the necessary communication protocols and configurations for reading the Q3AA1174 electricity meter.
- 26 Feb 2024, 16:18
- Forum: ESP Easy: Hardware
- Topic: Sparkfun DEV 22924
- Replies: 6
- Views: 1353
Re: Sparkfun DEV 22924
I checked this document: https://espeasy.readthedocs.io/en/lates ... chips.html
Here it says ESP32-C6 Not yet supported. Sparkfun DEV 22924 is based on ESP32-C6.
Here it says ESP32-C6 Not yet supported. Sparkfun DEV 22924 is based on ESP32-C6.
- 26 Feb 2024, 16:08
- Forum: Introduce yourself
- Topic: Newcomer but not young
- Replies: 3
- Views: 1497
Re: Newcomer but not young
Since you mentioned integrating with Domoticz, you can check if there are specific gateways or plugins available for devices operating on the 868.3 MHz frequency.
- 21 Feb 2024, 16:31
- Forum: ESP Easy: Projects / Applications
- Topic: Air Quality unit - which devices are best?
- Replies: 75
- Views: 6202
Re: Air Quality unit - which devices are best?
All of the sensors that you have chosen are supported by ESPEasy. I think it's a good list of components. You can also consider CCS811 Air Quality sensor. The CCS811 is from AMS, and can detect a rather wide range of VOCs. Connected to the microcontroller it will return a TVOC reading and the equiva...
- 20 Feb 2024, 11:09
- Forum: Introduce yourself
- Topic: Hello
- Replies: 1
- Views: 796
Re: Hello
Have you figured out the problem? Have you tested the Raspberry Pi separately? While Raspberry Pis come with a TVS (transient-voltage-suppression) diode ( https://partstack.com/c/diodes/transient-suppression-devices) to provide some protection against voltage surges, only certain models feature a re...
- 26 Jan 2024, 14:10
- Forum: ESP Easy: Projects / Applications
- Topic: ESP easy rules temperature
- Replies: 4
- Views: 1579
Re: ESP easy rules temperature
Confirm that your DHT22 sensor is providing accurate temperature readings. You can cross-check with another microcontroller.
You can check this project too. ESP Room SmartMonitor V3. It is based on EspEasy.
https://www.pcbway.com/project/sharepro ... e5a39.html
You can check this project too. ESP Room SmartMonitor V3. It is based on EspEasy.
https://www.pcbway.com/project/sharepro ... e5a39.html
- 19 Jan 2024, 16:49
- Forum: RPiEasy: General Discussion
- Topic: something foundational?
- Replies: 2
- Views: 1684
Re: something foundational?
Ensure that the timezone is correctly configured in RPiEasy. If the timezone is not set correctly, it might affect the triggering of time-based events.
- 19 Jan 2024, 16:41
- Forum: Introduce yourself
- Topic: Hello
- Replies: 2
- Views: 5774
Re: Hello
Welcome to the forum.
- 13 Jan 2024, 13:18
- Forum: ESP Easy: General Discussion
- Topic: hitachi air conditioning control with easyesp
- Replies: 18
- Views: 11948
Re: hitachi air conditioning control with easyesp
I am not sure but here is a quite big thread that you may find useful: viewtopic.php?t=1915&start=150
- 13 Jan 2024, 13:14
- Forum: RFlink: General Discussions
- Topic: Deltia 8.33 and Deltia 1.03
- Replies: 2
- Views: 13184
Re: Deltia 8.33 and Deltia 1.03
For the issue with the thermostat not reflecting the status correctly, it might be related to how the thermostat interprets or updates its status based on received commands.
- 09 Jan 2024, 21:35
- Forum: RFLink: Unsupported devices
- Topic: Funkbus (send) in V1.50 not working correctly
- Replies: 2
- Views: 16914
Re: Funkbus (send) in V1.50 not working correctly
Simplify the setup by testing the Funkbus control with a single RFLink unit (either sending or receiving) to isolate potential issues.
- 07 Jan 2024, 22:09
- Forum: RFlink: General Discussions
- Topic: PCR800X
- Replies: 2
- Views: 15091
Re: PCR800X
Please do what Stuntteam sugested. If possible, also test if the sensor itself has a fault.
- 07 Jan 2024, 22:00
- Forum: RFLink: Hardware Related discussions
- Topic: Pre-configured kit
- Replies: 2
- Views: 18603
Re: Pre-configured kit
Please check if you get any clue from here: https://community.home-assistant.io/t/m ... art/142537
If not, let's hope an Admin takes a look at your question.
If not, let's hope an Admin takes a look at your question.
- 25 Dec 2023, 23:18
- Forum: ESP Easy: General Discussion
- Topic: struggle with ntp setting
- Replies: 7
- Views: 3410
- 25 Dec 2023, 23:15
- Forum: ESP Easy: Software
- Topic: Two Canal ESP32-WROOM-32E. Relais send pulses when booting!
- Replies: 8
- Views: 3237
Re: Two Canal ESP32-WROOM-32E. Relais send pulses when booting!
Try adding a delay at the beginning of your on System#Boot rule.
- 23 Dec 2023, 17:24
- Forum: ESP Easy: Hardware
- Topic: E-Ink display
- Replies: 6
- Views: 8789
Re: E-Ink display
Your question is very similar to this one: https://letscontrolit.com/forum/viewtopic.php?t=5213#p67018 so my answer would be a copy of that ;) Is the 2.9 Inch e-paper display with screen resolution of 296x128 pixels shown here supported by ESPeasy? https://www.pcbway.com/project/shareproject/Zigbee...
- 20 Dec 2023, 13:17
- Forum: RFlink: General Discussions
- Topic: Lost remote
- Replies: 6
- Views: 3532
Re: Lost remote
Have you checked The Brennenstuhl RCS 2044 switch's manufacturer's documentation? I assume it uses a uses a proprietary protocol.
- 20 Dec 2023, 09:28
- Forum: ESP Easy: Hardware
- Topic: Eastron SDM120 energy meter
- Replies: 5
- Views: 3523
Re: Eastron SDM120 energy meter
Hopefully the bug will be fixed soon.
- 20 Dec 2023, 09:22
- Forum: RFlink: General Discussions
- Topic: Lost remote
- Replies: 6
- Views: 3532
Re: Lost remote
I am not sure if this is the right place to post this question. This forum is about Espeasy. Is Brennenstuhl RCS 2044 switch supported by ESPeasy. Hope somebody will come forward and clarify.
- 19 Dec 2023, 15:16
- Forum: ESP Easy: General Discussion
- Topic: send data to ESP (from google sheets/script)?
- Replies: 4
- Views: 6407
Re: send data to ESP (from google sheets/script)?
I think you can check IFTTT. You can check this out: https://www.theengineeringprojects.com/2022/02/sending-sensor-readings-to-google-sheet-through-ifttt-using-esp32.html You can publish multiple sensor readings from ESP32 to Google sheets via the IFTTT web service. To do the opposite, it requires a...
- 19 Dec 2023, 15:00
- Forum: ESP Easy: General Discussion
- Topic: struggle with ntp setting
- Replies: 7
- Views: 3410
Re: struggle with ntp setting
Check if there are any firewall rules blocking NTP traffic or if the ESPs are on a network that restricts outgoing NTP requests.
- 19 Dec 2023, 14:57
- Forum: ESP Easy: Hardware
- Topic: BME280 large offset
- Replies: 7
- Views: 2962
Re: BME280 large offset
Check the configuration settings in the new version of ESPEasy related to the BME280 sensor. Chcek if the sampling rates, sensor type selection, and calibration options, match the configurations in the old version as closely as possible.
- 19 Dec 2023, 14:51
- Forum: ESP Easy: General Discussion
- Topic: any open access point
- Replies: 4
- Views: 2165
Re: any open access point
ESP Easy firmware can be configured to connect to an available open access point after initial setup.
viewtopic.php?t=8046
viewtopic.php?t=8046
- 18 Dec 2023, 13:11
- Forum: ESP Easy: Hardware
- Topic: E-Ink display
- Replies: 6
- Views: 8789
Re: E-Ink display
Here you will find Plugin details of the ILI9341, ILI9342, ILI9481, ILI9486 and ILI9488 chip families in case you decide to use these displays instead.
https://espeasy.readthedocs.io/en/lates ... /P095.html
https://espeasy.readthedocs.io/en/lates ... /P095.html
- 18 Dec 2023, 09:21
- Forum: RFLink: Unsupported devices
- Topic: V2 Phoenix Transmit capability?
- Replies: 1
- Views: 2322
Re: V2 Phoenix Transmit capability?
This document https://www.rflink.nl/devlist.php says V2 Phoenix remote signals (Receive only!)
For Alarm systems, gate openers, garage doors (Receive and transmit) here are the options:
eTIGER ES-RC1 alarm remote control 4 buttons
Yale HSA3000/6000 Alarm System sensors
X2D Alarm System sensors
For Alarm systems, gate openers, garage doors (Receive and transmit) here are the options:
eTIGER ES-RC1 alarm remote control 4 buttons
Yale HSA3000/6000 Alarm System sensors
X2D Alarm System sensors
- 17 Dec 2023, 09:06
- Forum: Introduce yourself
- Topic: Hi all
- Replies: 3
- Views: 3353
Re: Hi all
By the way, here is the section about RFlink: viewforum.php?f=8
This is the RFlink support forum. You can repost your question there. I hope you will get response.
This is the RFlink support forum. You can repost your question there. I hope you will get response.
- 17 Dec 2023, 09:01
- Forum: Introduce yourself
- Topic: Hi all
- Replies: 3
- Views: 3353
Re: Hi all
This forum is about ESPeasy. I am not sure how much help you will get here about how to intergrate your excisting 868 mhz door and pir sensors in domotics with a RFLink 868mhz unit. I hope the admins will come forward for help.
- 17 Dec 2023, 08:57
- Forum: Introduce yourself
- Topic: Hello!
- Replies: 1
- Views: 1677
Re: Hello!
Welcome to this forum, dear.
- 08 Dec 2023, 13:39
- Forum: Introduce yourself
- Topic: Moinmoin :)
- Replies: 1
- Views: 1647
Re: Moinmoin :)
Welcome to this forum.
- 23 Nov 2023, 15:31
- Forum: ESP Easy: Hardware
- Topic: Human presence sensor (not IR)
- Replies: 5
- Views: 3305
Re: Human presence sensor (not IR)
Oh... thats cool. On their Homepage they claim "Directionality support". Is it possible to detect if someone is moving from left to right or right to left? I'd need something to check if someone enters or leaves a room. For left-right movement detection, one approach can include using mul...
- 09 Nov 2023, 14:59
- Forum: ESP Easy: Software
- Topic: MQTT for rules on INA219 gives an error
- Replies: 8
- Views: 5131
Re: MQTT for rules on INA219 gives an error
On INA219#W Do Publish domoticz/in,("idx":209,"nvalue":0,"svalue":"[INA219#W]") endon[/code] Looks like there is a typo here. The 'on' should be in lower case. on INA219#W do Publish domoticz/in,{"idx":209,"nvalue":0,"svalue":&qu...
- 09 Nov 2023, 14:52
- Forum: ESP Easy: Projects / Applications
- Topic: Current monitoring with ESPEasy
- Replies: 16
- Views: 4844
Re: Current monitoring with ESPEasy
Thanks for sharing. Could you please tell me what is the advantage of using a precision rectifier instead of CT? Does it make the coding easier? Oh, sorry for the confusion. I don't replace the CTs. It is just the electronics behind it. The solutions which are out there also use CTs. But they just ...
- 07 Nov 2023, 13:26
- Forum: ESP Easy: General Discussion
- Topic: MQTT duplicated messages
- Replies: 2
- Views: 1601
Re: MQTT duplicated messages
9999 seconds interval is extremely long. The sensor may be retransmitting the same data before it goes into deep sleep. You can make this interval smaller to see if the duplication disappears.
- 07 Nov 2023, 13:17
- Forum: ESP Easy: Projects / Applications
- Topic: Current monitoring with ESPEasy
- Replies: 16
- Views: 4844
Re: Current monitoring with ESPEasy
Thanks for sharing. Could you please tell me what is the advantage of using a precision rectifier instead of CT? Does it make the coding easier?
- 06 Nov 2023, 14:48
- Forum: ESP Easy: Hardware
- Topic: QMC5883L vs HCM5883L
- Replies: 5
- Views: 2787
Re: QMC5883L vs HCM5883L
You can consider using esphome. It supports QMC5883L. https://esphome.io/components/sensor/qmc5883l.html That's a rather silly remark on the ESPEasy forum :shock: :( We are trying to help people in using ESPEasy, not sending them away :!: I am sorry. I thought that both ESPeasy and ESPhome were mai...
- 06 Nov 2023, 14:46
- Forum: ESP Easy: Hardware
- Topic: DHT20
- Replies: 5
- Views: 2630
Re: DHT20
ESPeasy supports DHT11 and DHT22. But there is no mention of DHT20 here:
https://www.letscontrolit.com/wiki/inde ... HT11_DHT22
https://www.letscontrolit.com/wiki/inde ... HT11_DHT22
- 05 Nov 2023, 15:03
- Forum: ESP Easy: Software
- Topic: Compiling espeasy for ESP12f D1 mini board
- Replies: 4
- Views: 1799
Re: Compiling espeasy for ESP12f D1 mini board
are you talking about this board?
https://www.amazon.com/Organizer-ESP826 ... B081PX9YFV
Or something else?
https://www.amazon.com/Organizer-ESP826 ... B081PX9YFV
Or something else?
- 05 Nov 2023, 14:51
- Forum: ESP Easy: Hardware
- Topic: QMC5883L vs HCM5883L
- Replies: 5
- Views: 2787
Re: QMC5883L vs HCM5883L
You can consider using esphome. It supports QMC5883L.
https://esphome.io/components/sensor/qmc5883l.html
https://esphome.io/components/sensor/qmc5883l.html
- 31 Oct 2023, 16:31
- Forum: ESP Easy: Hardware
- Topic: Need help getting values from soil moisture sensor
- Replies: 4
- Views: 2268
Re: Need help getting values from soil moisture sensor
For Espeasy, you can either buy miceuz or BeFlE soil moisture sensor. You can find the details below. https://espeasy.readthedocs.io/en/latest/Plugin/P047.html And if you ever consider buying an Arduino or Raspberry Pi-compatible soil moisture sensor for other projects, here are some choices for you...