Ok, managed to capture it! The wind alert (shaking the device) produces this (with firmware 1.48): 20;20;DEBUG;Pulses=440;Pulses(uSec)=0,570,2460,2460,2460,2460,2460,2460,2460,2460,2460,2460,2460,2460,2460,2460,2460,2460,2460,2460,2460,2460,2460,2460,2460,2490,4770,1200,1200,1200,1200,570,540,570,54...

Ok, so for me: * firmware 1.51 (with bundled RFLink Loader) do *not* display the Pulses info for RTS * firmware 1.50 (with bundled RFLink Loader) do *not* display the Pulses info for RTS * firmware 1.48 (with bundled RFLink Loader) properly displays the Pulses info for RTS So I went back to firmware...

I followed the instructions and enabled these options: * Serial Port Logging * Log Mode: Debug * Log Mode: Unhandled (as a bonus) With this, I have successfully captured the periodic beacon from the device: 20;05;DEBUG;RTS P1;a0ee0000b0f4e4c40019; 20;06;RTS;ID=1b0f4e4;SWITCH=01;CMD=STOP; 20;07;DEBUG...

Hi,
Sure! I have dismounted the device and am currently collecting logs in a quieter RF environment. I'll get back to you as soon as I have captured the signals

Hi all, I have a Somfy Eolis 3D WireFree RTS wind detector that I've been using for a few years. It sends out a regular "ping " (every ~18min 30s) when there's no wind, plus an immediate message when there is wind. With the older RFLink firmware from 2017, it worked - although both pings a...

Great, thank you @Stuntteam!
I did as you suggested, and indeed nothing was lost during the upgrade.

Hi all,

I have a RFlink, Somfy version with the firmware from 2017 (probably 18/10/2017). Great device!

Question: if I upgrade it to the latest firmware, will I lose the pairing with my Somfy devices? If yes: is there a way to backup them?

Thanks in advance for your insight

OK, I found a way to detect wind from an Eolis 3D Wirefree RTS with RFLink! Here's how it goes: * A ping consists of 2 messages (~ 2-5 sec interval), and each message is doubled (~10-30ms interval). * Without wind, we get a ping every ~18min 10s. * And in case of wind, we get an immediate ping and t...

Hi Stuntteam,

Any news regarding this? Did you see anything in the logs, or would a new capture help?

Thanks a lot

Hi Stuntteam,

Wow, thanks for your quick answer! I grepped to extract all lines that contain "rflink" from the HA logs. The file is attached, let me know if it's sufficient

PS: got a TCP keepalive every minute that pollutes the logs, sorry about that!

Hi all, I have an awning with a vertical blind at its end, and successfully paired them with RFLink so I can control them from Home Assistant, works great. Now I also have a motion-based wind detector (Somfy Eolis 3D WireFree RTS) that sends me STOP commands when I shake it. But the problem is, it a...