OK thx.

Switching over Mqtt Cmd is an option.

But is there not a Device to show the Output?

1883 is already in use, so I took an other number, should not be the problem

Is it possible to analyse the Mqtt, maybe the Status is transferred and ioBroker does not show it?

here we go

Switch is set as Device
Home Assist for Mqtt connection to ioBroker (Adapter Sonnos)
only the SHT31 is sent to ioBroker.

(are inputs and outputs to sent via Wifi not the Basic function....?)

I do not know how that works, normaly I just switch the Object in ioBroker, the Adapter does the Mqtt.

I know, but works fine.

What I need is the info sent via Mqtt, actually nothing is getting out from the State of the Switch.

SHT31 is working fine via Home Assist and Mqtt to ioBroker (Sonoff).
Inputs are not shown in ioBroker? (other thread)
Only Outputs I do not understand, how should I configure that Pin ? missing a Device to configure.

OK, thx.
But I do not even have a clue where I should start and program that?

Outputs are switched via ioBroker over Mqtt.

Home Assist (openHub) Mqtt
%sysname%/%tskname%/%valname%

Hello!

How do I configure Outputs, can not find a presetting for it? (Test_A)

Sry for stupid questions, still starting.

THX

Ath wrote: ↑06 Aug 2021, 14:24

OK, Switch on D7, intern. Pullup, inversed Logic
works perfect

but the State is not sent via Mqtt ?
on D1/2 there is a SHT31, all values are sent and shown in ioBroker
Controller 1 is active and the switch is checked to send.

?

Hello! https://www.amazon.de/gp/product/B0754N794H/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 Which can be used for Inputs/Outputs. D1 and D2 are blocked for I2C and SHT31. I need 2 Inputs and 4 Outputs. Which Dx should I use for, Inputs with internal Pullup switched to ground. Outputs to ...

THX, will do my best.

Hello!

Would like to ask what the settings for a switch are?
Switch on ESP8266 a closed to Gnd, means vom Pin to switch to Gnd, correct?
Possible to send (Mqtt) the opposit, ON = OFF vice versa ?

THX

Perfect, it works fine !!!!

THX

THX!

is it possible to test it on my esp?

Hello! Which settings does it need to run the SHT31 Temp. Humidity device? 1 - SCL 2 - SDA 3,3V Gnd Tried several settings with I2C lkie DHT12, but nothing. THX https://www.amazon.de/gp/product/B095RYD38K/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 https://www.amazon.de/gp/product/B0754N794...