Hey, please check with a Multimeter the Voltage on the Capa-Sensors. Don't! Using the 5V Output pin The Current is to weak / low. Capacitive-Sensors are the same as an condensator. And the sensors have to "charge". If you try this with the output-pin, you may have not enough Power to load ...

Hey, using D1 mini with mega-20200410 and BME280 I am calculating absolute humidity using dummy device and rules like this on BME280#Temperature do TaskValueSet 5,1,(6.112*(2.7182^((17.67*[BME280#Temperature])/([BME280#Temperature]+243.5)))*[BME280#Humidity]*2.1674)/(273+[BME280#Temperature]) endon...

Okay.

Status for now:
No Problem actually. It-seems it's runnig, quick, fast and stable.
The test goes on.


Thx for help and support!

Yup, some posts just overlapped. I had published my post after you had sent it, but probably started writing before that - i think :-) . Interesting thing about the flash. Whether an external memory fits there? But... no matter for me at this time :-) Thy for help. I dont know if there is a bug in t...

Oh i have edit my older Post: Change to GPIO7 - okay :-) can save without a hangup. ---- but - didnt find the Sensor... ... Change to GPIO8 - ... problems like GPIO6. WTF? ... Change to GPIO0 (Zero) Works. Sensor has working under ESP8266 with ESP-Easy to. I dont know if this a "cheap" clo...

Ok - Added a Task for a DS18b20 ... I try to set GPIO6 aus the TX press submit... and than that happens. rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DOUT, clock div:1 load:0x3fff0018...

Yes, i use the ESP32S for now with an ipaddress from my LAN.
AND...
I haven't no glitch and hangup.
The ESP is actually working.
Now i will create another task and will wait whats happens.

For the initial flash, using the Espressif flashtool, you need the -factory.bin file, that includes the required boot and partition stuff. After it is running, you can use the OTA updates via the Tools/Firmware update hutton using the .bin file you mention. Oh okay - thank you for this hint. Maybe,...

Hey, sorry for my late Answere - there was a weekend ... and children-time :-) I will test it. First: I have a problem to flash and "boot" this version: ESP_Easy_mega_20210223_display_ESP32_4M316k.bin It will not boot - just an error. As a Second step, i will flash the older version - and ...

Wow suprise - it's a dualcore? that i will not belive :D but... okay then i don#t know, why i have this problemsß maybe ... an bug? I have no idea what now i can do. Edit: it seems i am a victim from my unorganized working.. i accidently reflashed the januar-version. Now. i ill flash the ESP_Easy_me...

Yes, the Output shows no error :-( I didn't know, why mDNS where in use - because i where connected to my lokal wlan. is espeasy compiled for the esp32s? maybe this is the problem ? because its a singlecore? Interessting thing - after i clean the complete rom and reflashed it, bring it in the correc...

Hey toghether - What exact board have you used? I use this Dev-Board: http://www.hit-karlsruhe.de/hit-info/info-ws18/CM-IoT_Fuell-30/data/NodeMCU-32S-Catalogue_Entwicklerboard_PINS.pdf with this version: ESPEasy_ESP32_mega-20210114 - What device is connected and how is it configured (a screenshot of...

+----------------------------------------------------------------------------------------------------------------------+ |Summary: It seems that I made a mistake while flashing? The version I used may also have a bug.| +-------------------------------------------------------------------------------...