Search found 58 matches
- 27 Oct 2023, 15:22
- Forum: ESP Easy: Software
- Topic: Control ESPEasy-thermostat -> Rules problem
- Replies: 34
- Views: 27450
Re: Control ESPEasy-thermostat -> Rules problem
Ah sorry, had missed the word "hysteresis" in your question. Nope, that setting is not possible to set via a command right now. It can be added, but that does require a code change, so that's not helpful to fix it right now. Thx. I said it to one person who wanted to change hysteresis the...
- 26 Oct 2023, 15:14
- Forum: ESP Easy: Software
- Topic: Control ESPEasy-thermostat -> Rules problem
- Replies: 34
- Views: 27450
Re: Control ESPEasy-thermostat -> Rules problem
Regardless of how you want to set it, or perform some specific sequence of actions via a single HTTP (or MQTT) command, it is best to create some rules block for it with your own event name. You can give several eventvalues along with it and use those in the rules block. See for explanation of even...
- 26 Oct 2023, 02:04
- Forum: ESP Easy: Software
- Topic: Control ESPEasy-thermostat -> Rules problem
- Replies: 34
- Views: 27450
Re: Control ESPEasy-thermostat -> Rules problem
Hi guys. Could anyone answer, how set hysteresis in level control via http command?
- 07 Sep 2023, 10:00
- Forum: ESP Easy: Software
- Topic: Get PWM value in any way
- Replies: 15
- Views: 8101
Re: Get PWM value in any way
2nd for triggering pwm: ... 3rd when the PWM changing duty this should store in memory last value: ... Why not combining these two? Like: On pwm Do PWM,5,%eventvalue1% TaskValueSet,TestMemory,Dummy,%eventvalue1% //Publish %sysname%/GPIO/GPIO5,%eventvalue1% Endon it`s working. YAASS)) Td-er was righ...
- 07 Sep 2023, 09:16
- Forum: ESP Easy: Software
- Topic: Get PWM value in any way
- Replies: 15
- Views: 8101
- 07 Sep 2023, 05:50
- Forum: ESP Easy: Software
- Topic: Get PWM value in any way
- Replies: 15
- Views: 8101
Re: Get PWM value in any way
I guess this is not working because the PWM#State is still 0 and did`t change value when u call it via http. This is why taskvalueset wont work. I could see changes in logs but i dunno.
- 07 Sep 2023, 05:00
- Forum: ESP Easy: Software
- Topic: Get PWM value in any way
- Replies: 15
- Views: 8101
Re: Get PWM value in any way
Stil can`t get success. I wrote 3 rules 1st for restore the last PWM value: on System#Boot do PWM,5,[TestMemory#Dummy] endon 2nd for triggering pwm: on pwm do PWM,5,%eventvalue1% //Publish %sysname%/GPIO/GPIO5,[Plugin#GPIO#Pinstate#5] endon 3rd when the PWM changing duty this should store in memory ...
- 05 Sep 2023, 18:19
- Forum: ESP Easy: Software
- Topic: Get PWM value in any way
- Replies: 15
- Views: 8101
Re: Get PWM value in any way
This is what i can`t understand) I though should use "status,g,5" in command line or something! Thanks a lot. I have PWM fan and wanted to store and restore the last duty.
- 05 Sep 2023, 17:42
- Forum: ESP Easy: Software
- Topic: Get PWM value in any way
- Replies: 15
- Views: 8101
Re: Get PWM value in any way
How to store adn read PWM to/from Dummy values? I read this but can`t understand syntax. What exactly used here and what not For any plugin that registers the used pin(s), the last set pin state can be retrieved, either regular pin state or PWM state, by using this syntax: [Plugin#<pluginId>#Pinstat...
- 24 Dec 2022, 08:57
- Forum: ESP Easy: Software
- Topic: Can`t understand how flash esp8266 atm
- Replies: 1
- Views: 1138
- 24 Dec 2022, 07:08
- Forum: ESP Easy: Software
- Topic: Can`t understand how flash esp8266 atm
- Replies: 1
- Views: 1138
Can`t understand how flash esp8266 atm
i did`t use flasher 1 year and don't understand how to update as before? where is bin files?
https://github.com/letscontrolit/ESPEas ... a-20221105
https://github.com/letscontrolit/ESPEas ... a-20221105
- 29 Oct 2022, 23:19
- Forum: ESP Easy: General Discussion
- Topic: Espeasy compatible unit with wired ethernet?
- Replies: 85
- Views: 43793
- 29 Oct 2022, 18:46
- Forum: ESP Easy: Hardware
- Topic: Sensair S8
- Replies: 118
- Views: 105900
Re: Sensair S8
Yep, sounds like ESD damage. Just wondering, how did you clean it? For example a toothbrush or paint brush may cause static discharge as the hairs may get statically charged when brushing. Also the lamp inside the S8 is quite sensitive to high voltages. > 5.2V can damage the lamp inside the sensor....
- 29 Oct 2022, 18:42
- Forum: ESP Easy: General Discussion
- Topic: Espeasy compatible unit with wired ethernet?
- Replies: 85
- Views: 43793
- 29 Oct 2022, 16:31
- Forum: ESP Easy: General Discussion
- Topic: Espeasy compatible unit with wired ethernet?
- Replies: 85
- Views: 43793
Re: Espeasy compatible unit with wired ethernet?
What are you using as ethernet? One of those (purple) boards from Ali express with a LAN8720A chip and crystal? There are several options here: - solder a wire to the EN pin of the crystal (which is rather tricky as you can easily damage the crystal) so you can keep the crystal off during boot. - A...
- 29 Oct 2022, 15:36
- Forum: ESP Easy: Hardware
- Topic: Sensair S8
- Replies: 118
- Views: 105900
Re: Sensair S8
These devices seem to be quite sensitive/fragile, also to ESD, so it's quite easy to damage them. Found these handling instructions for Sensair S8: https://rmtplusstoragesenseair.blob.core.windows.net/docs/publicerat/ANO102.pdf So i guess it damaged. Coz before i replaced wemos it works, no matter ...
- 29 Oct 2022, 15:06
- Forum: ESP Easy: Hardware
- Topic: Sensair S8
- Replies: 118
- Views: 105900
Re: Sensair S8
Last few month found that my s8 increased ppm and i decided to clean it. After that esp receive 0 or 65600 ppm. I thought may be i just broke pins, take other wemos, soldering pins, connected all of them and configured exactly as before. Nothing changes. After that i take esp32, measured voltage, it...
- 29 Oct 2022, 08:20
- Forum: ESP Easy: General Discussion
- Topic: Espeasy compatible unit with wired ethernet?
- Replies: 85
- Views: 43793
Re: Espeasy compatible unit with wired ethernet?
Guys if i have 30 pins ESP32 which pins i could replace GPIO-0? guess I can't start LAN8720 because of it
- 22 Nov 2021, 11:38
- Forum: ESP Easy: Hardware
- Topic: WT32-ETH01
- Replies: 128
- Views: 178681
Re: WT32-ETH01
I don't know if the phase of the clock matters here. GPIO-17 is the inverse signal of GPIO-16 (at least when it is set to be used as clock) So you may also try GPIO-16. Does the log suggest the ETH board is found? FOund something AP Mode: Client connected:Connected devices: 1 213841: UNKNOWN WIFI/E...
- 22 Nov 2021, 11:34
- Forum: ESP Easy: Hardware
- Topic: WT32-ETH01
- Replies: 128
- Views: 178681
- 22 Nov 2021, 11:32
- Forum: ESP Easy: Hardware
- Topic: WT32-ETH01
- Replies: 128
- Views: 178681
- 22 Nov 2021, 11:23
- Forum: ESP Easy: Hardware
- Topic: WT32-ETH01
- Replies: 128
- Views: 178681
Re: WT32-ETH01
I don't know if the phase of the clock matters here. GPIO-17 is the inverse signal of GPIO-16 (at least when it is set to be used as clock) So you may also try GPIO-16. Does the log suggest the ETH board is found? FOund something AP Mode: Client connected:Connected devices: 1 213841: UNKNOWN WIFI/E...
- 22 Nov 2021, 11:07
- Forum: ESP Easy: Hardware
- Topic: WT32-ETH01
- Replies: 128
- Views: 178681
- 22 Nov 2021, 10:49
- Forum: ESP Easy: Hardware
- Topic: WT32-ETH01
- Replies: 128
- Views: 178681
- 22 Nov 2021, 10:42
- Forum: ESP Easy: Hardware
- Topic: WT32-ETH01
- Replies: 128
- Views: 178681
Re: WT32-ETH01
Yep. Now i know.
- 22 Nov 2021, 10:33
- Forum: ESP Easy: Hardware
- Topic: WT32-ETH01
- Replies: 128
- Views: 178681
Re: WT32-ETH01
If Google translate didn't mess up, then I think this is almost exactly what I described: Either disable the crystal during boot by connecting the OSC_EN pin with the eth power pin (which can be configured in ESPEasy) Only you have to probably invert the signal, hence my remark for the transistor. ...
- 22 Nov 2021, 09:57
- Forum: ESP Easy: Hardware
- Topic: WT32-ETH01
- Replies: 128
- Views: 178681
Re: WT32-ETH01
What do you mean by only working with a custom build? Which eth module do you use? And what do you mean with "how starting it with my esp." I assumed it was about the GPIO-0 being toggled at boot. Another way is to let the ESP32 send the clock to the eth board, but that probably requires ...
- 22 Nov 2021, 09:31
- Forum: ESP Easy: Hardware
- Topic: WT32-ETH01
- Replies: 128
- Views: 178681
Re: WT32-ETH01
GPIO-0 is sadly the only one to use when your LAN board has an external crystal, like those boards sold on Ali Express. But, there is hope, as I am also using those on my board designs :) There are 2 ways you can make this work: - Wire a GPIO pin to the enable pin of the crystal (probably need a tr...
- 22 Nov 2021, 08:35
- Forum: ESP Easy: Hardware
- Topic: WT32-ETH01
- Replies: 128
- Views: 178681
Re: WT32-ETH01
Is there any chance to start lan8720 on esp 32 DevKit V1? I have no GPIO-0!
- 04 Nov 2021, 15:21
- Forum: ESP Easy: Software
- Topic: Inputswitch state is deprecated
- Replies: 22
- Views: 10248
Re: Inputswitch state is deprecated
Your rules could be somewhat more efficient: on Button1#State do gpio,12,!%eventvalue1% endon on Button2#State do gpio,5,%eventvalue1% endon The exclamation mark in front of the first argument to the event (%eventvalue1%) will invert the value (0->1 1->0). (Edit: Changed %eventvalue1% to all lower-...
- 04 Nov 2021, 13:19
- Forum: ESP Easy: Software
- Topic: Inputswitch state is deprecated
- Replies: 22
- Views: 10248
Re: Inputswitch state is deprecated
Button does`t reacting.Ath wrote: ↑04 Nov 2021, 12:18 Your rules could be somewhat more efficient:The exclamation mark in front of the first argument to the event (%eventvalue1%) will invert the value (0->1 1->0).Code: Select all
on Button1#State do gpio,12,!%EventValue1% endon on Button2#State do gpio,5,%EventValue1% endon
- 04 Nov 2021, 10:59
- Forum: ESP Easy: Software
- Topic: Inputswitch state is deprecated
- Replies: 22
- Views: 10248
Re: Inputswitch state is deprecated
I made some investigations and I have SonOff TX T3EUC2 flashed by 8285.normal ESPEasy. here is Devices, Rules and logs. If i Touch the button all ok, but if i tryied to switch from domoticz via MQTT i get this error in logs.This is only one way to make SonOff working properly. Devs.jpg Rules.jpg Log...
- 04 Nov 2021, 06:08
- Forum: ESP Easy: Projects / Applications
- Topic: SonOff T3
- Replies: 3
- Views: 8591
- 03 Nov 2021, 22:26
- Forum: ESP Easy: Projects / Applications
- Topic: SonOff T3
- Replies: 3
- Views: 8591
- 03 Nov 2021, 22:06
- Forum: ESP Easy: Projects / Applications
- Topic: SonOff T3
- Replies: 3
- Views: 8591
SonOff T3
I decided to flash my SonOff T3EU2C and flashing it ESP8266.normal 1m. To configure it i should set touch button on GPIO-9 and write the rules switch GPIO-5 whenbutton is acctive. But i can`t see GPIO-9. Here is a screenshot.
- 01 Nov 2021, 20:18
- Forum: ESP Easy: Software
- Topic: Inputswitch state is deprecated
- Replies: 22
- Views: 10248
Re: Inputswitch state is deprecated
I made an issue for this: https://github.com/letscontrolit/ESPEasy/issues/3829 I found a reason why i get this warning. I have 2 different devices (switch and MQTT Domoticz Helper) with the same idx=1. after removing idx from switch i get no warns! And it does`t matter if check was enable or disabl...
- 01 Nov 2021, 13:54
- Forum: ESP Easy: Software
- Topic: Inputswitch state is deprecated
- Replies: 22
- Views: 10248
Re: Inputswitch state is deprecated
First, you're missing an "endon" in your first rules block. About inputswitchstate I don't see it in your posted code/screenshots. But I do see it in Domoticz MQTT controller code. I looked at the code, but the only way I can see how this could occur is when there is some on your network ...
- 01 Nov 2021, 13:47
- Forum: ESP Easy: Software
- Topic: Inputswitch state is deprecated
- Replies: 22
- Views: 10248
Re: Inputswitch state is deprecated
First, you're missing an "endon" in your first rules block. About inputswitchstate I don't see it in your posted code/screenshots. But I do see it in Domoticz MQTT controller code. I looked at the code, but the only way I can see how this could occur is when there is some on your network ...
- 01 Nov 2021, 12:00
- Forum: ESP Easy: Software
- Topic: Inputswitch state is deprecated
- Replies: 22
- Views: 10248
Inputswitch state is deprecated
Hello there! I have this configuration, and get "Inputswitch state is deprecated" after swithing thermostat . What`s problem here?
- 01 Nov 2021, 11:37
- Forum: ESP Easy: Hardware
- Topic: Sensair in Domoticz
- Replies: 6
- Views: 6241
Re: Sensair in Domoticz
Yep... That involves adding a selector to both CO2 plugins to switch to using nvalue instead of svalue. The selector is to keep installations in use working. Or add it to both Domoticz controllers as it is a specific Domoticz issue. It is in the back of my mind's todo list for years and I keep forg...
- 28 Oct 2021, 19:32
- Forum: ESP Easy: Hardware
- Topic: Sensair in Domoticz
- Replies: 6
- Views: 6241
Re: Sensair in Domoticz
Do You know any solution how to send value without rules?TD-er wrote: ↑28 Oct 2021, 17:14 I think you should leave out the quotes on the actual numerical value for nvalue.Code: Select all
Publish domoticz/in,'{"idx":57,"nvalue":[Co2Test#Dummy]}'
- 28 Oct 2021, 19:30
- Forum: ESP Easy: Hardware
- Topic: Sensair in Domoticz
- Replies: 6
- Views: 6241
Re: Sensair in Domoticz
OMG it WORKS! Thank YOU! I did`t know that the i should leave quotes for nvalue. Thanks again!TD-er wrote: ↑28 Oct 2021, 17:14 I think you should leave out the quotes on the actual numerical value for nvalue.Code: Select all
Publish domoticz/in,'{"idx":57,"nvalue":[Co2Test#Dummy]}'
- 28 Oct 2021, 16:34
- Forum: ESP Easy: Hardware
- Topic: Sensair in Domoticz
- Replies: 6
- Views: 6241
Sensair in Domoticz
I`ve not found any solutions of my problem. So i need help. I have S8 and lastest ESPeasy firmware. I did everythingthat i found in domoticz and Letscontrol forums but have no idea how to send ppm to domoticz? http and mqtt rules just won`t working! How to convert this MQTT data to domoticz. almost ...
- 31 May 2021, 13:28
- Forum: ESP Easy: Software
- Topic: Nextion display plugin
- Replies: 587
- Views: 2391765
Re: Nextion display plugin
Because this is 2 different commands. Internal commands can be used only from command line. read this https://www.letscontrolit.com/wiki/index.php/ESPEasy_Command_Reference Also for your project you will find here all of you needed https://www.letscontrolit.com/wiki/index.php/NEXTIONDisplay#Mass_up...
- 25 May 2021, 14:26
- Forum: ESP Easy: Software
- Topic: Nextion display plugin
- Replies: 587
- Views: 2391765
Re: Nextion display plugin
Ah, the Level plugin. But still nothing specific to the Nextion. For the Level control you can react on a sensor value changing from a specific threshold (hysteresis). You would need a rule like: on Level#Output do if %eventvalue% = 1 // value within range else // value outside set range endif endo...
- 25 May 2021, 10:34
- Forum: ESP Easy: Software
- Topic: Nextion display plugin
- Replies: 587
- Views: 2391765
Re: Nextion display plugin
Because this is 2 different commands. Internal commands can be used only from command line. read this https://www.letscontrolit.com/wiki/index.php/ESPEasy_Command_Reference Also for your project you will find here all of you needed https://www.letscontrolit.com/wiki/index.php/NEXTIONDisplay#Mass_upd...
- 01 May 2021, 11:44
- Forum: ESP Easy: Software
- Topic: Nextion display plugin
- Replies: 587
- Views: 2391765
- 01 May 2021, 11:25
- Forum: ESP Easy: Software
- Topic: Nextion display plugin
- Replies: 587
- Views: 2391765
Re: Nextion display plugin
Ah, the Level plugin. But still nothing specific to the Nextion. For the Level control you can react on a sensor value changing from a specific threshold (hysteresis). You would need a rule like: on Level#Output do if %eventvalue% = 1 // value within range else // value outside set range endif endo...
- 01 May 2021, 10:30
- Forum: ESP Easy: Software
- Topic: Nextion display plugin
- Replies: 587
- Views: 2391765
Re: Nextion display plugin
The rules you refer to change the setpoint (temperature threshold) value for the ThermOLED plugin, so I wouldn't know how to relate that to the Nextion display? Previous rules you have used are sufficient to display values on a Nextion, I'd assume. this from here https://www.letscontrolit.com/wiki/...
- 01 May 2021, 09:44
- Forum: ESP Easy: Software
- Topic: Nextion display plugin
- Replies: 587
- Views: 2391765
Re: Nextion display plugin
Don't use %v1%=[Nextion#value]/10 But use the "let" command for this: let,1,[Nextion#value]/10 Erm, yes, of course, sorry, my old brain just didn't remember the needs of ESPEasy at the moment I`ve found this rules for ESPeasy. How to adopt this in Nextion, if it possible? on valuedown do ...