Search found 112 matches
- 12 Feb 2019, 10:53
- Forum: ESP Easy: Hardware
- Topic: DS18B20 setup to ignore Extreme data
- Replies: 7
- Views: 6532
Re: DS18B20 setup to ignore Extreme data
i use paralise power mode, the longest sensor are 20 mts, and its working.
- 04 May 2018, 12:31
- Forum: ESP Easy: Hardware
- Topic: Support for PZEM 004T Energy monitor
- Replies: 309
- Views: 14003384
- 01 Apr 2018, 00:25
- Forum: ESP Easy: General Discussion
- Topic: Espeasy with momentary switches / impulse (latching) relay
- Replies: 4
- Views: 5881
Re: Espeasy with momentary switches / impulse (latching) relay
Hi,
i have a bhonofre module with espeasy, with this configuration:
rules:
On interruptor#Switch do
if [interruptor#Switch]=1
GPIO,4,1
else
GPIO,4,0
endif
endon
i have a bhonofre module with espeasy, with this configuration:
rules:
On interruptor#Switch do
if [interruptor#Switch]=1
GPIO,4,1
else
GPIO,4,0
endif
endon
- 28 Mar 2018, 15:41
- Forum: ESP Easy: Projects / Applications
- Topic: Modded "Wifi" Sound Alarm Siren project
- Replies: 23
- Views: 21063
Re: Modded "Wifi" Sound Alarm Siren project
good work. this information are alwallys welcome.
- 29 Nov 2017, 15:10
- Forum: ESP Easy: Hardware
- Topic: [SOLVED] HC-SR04 and percentage value
- Replies: 14
- Views: 13562
Re: [SOLVED] HC-SR04 and percentage value
carefull with the water vapor because i had this sensor with mysensors working fine but after 2 months stop give good values, it was the oxid by the water inside the sonar piece.
- 28 Nov 2017, 15:13
- Forum: ESP Easy: Hardware
- Topic: [SOLVED] HC-SR04 and percentage value
- Replies: 14
- Views: 13562
- 28 Nov 2017, 14:32
- Forum: ESP Easy: General Discussion
- Topic: Increase number of devices
- Replies: 18
- Views: 17773
- 27 Nov 2017, 20:00
- Forum: ESP Easy: General Discussion
- Topic: Increase number of devices
- Replies: 18
- Views: 17773
- 01 Oct 2017, 23:43
- Forum: ESP Easy: General Discussion
- Topic: Schedule like in original firmware
- Replies: 3
- Views: 4212
Re: Schedule like in original firmware
you can start to read the rules wiki.
https://www.letscontrolit.com/wiki/inde ... rial_Rules
https://www.letscontrolit.com/wiki/inde ... rial_Rules
- 25 Sep 2017, 16:03
- Forum: ESP Easy: Software
- Topic: GPIO pin status at rules engine
- Replies: 9
- Views: 18475
Re: GPIO pin status at rules engine
i have a irrigation system too with espeasy and domoticz to controll 8 relay, you for 16 can use the rules to controll it like this on relay1 do gpio,1,1 timerset 1,1800 //max timer to esp turn gpio off endoff on Rules#Timer=1 do gpio,1,0 SendToHTTP domoticzip,8080,/json.htm?type=param=switchlight&a...
- 05 Sep 2017, 23:23
- Forum: ESP Easy: Hardware
- Topic: BME280 - No I2C devices found
- Replies: 8
- Views: 11412
Re: BME280 - No I2C devices found
i dont have the BME280 sensor but i have another problem with mcp23017 i2c, even buy many to try but happen with all. on breadboard, the schematic is the same that is on wiki. when i do a i2c scan i have this: 0x20 PCF8574, MCP23017, LCD Modules or 0x27 PCF8574, MCP23017, LCD Modules or 0x20 PCF8574...
- 19 Jul 2017, 23:39
- Forum: RFLink: Unsupported devices
- Topic: CAME wagner Blind Remote control
- Replies: 1
- Views: 4758
Re: CAME wagner Blind Remote control
is this information good?
- 07 Jul 2017, 09:58
- Forum: RFLink: Unsupported devices
- Topic: CAME wagner Blind Remote control
- Replies: 1
- Views: 4758
CAME wagner Blind Remote control
Hi sttun i ask you if it is possible to add support to CAME remote control, i has tryed to do a learning mode but without sucess . http://www.came.com/global/en/operators-awnings-shutters-and-blinds/accessories/wagner.html i put here the debud. CHANNEL 1 OPEN 20;13;DEBUG;Pulses=50;Pulses(uSec)=30,54...
- 01 Jul 2017, 01:51
- Forum: RFlink: General Discussions
- Topic: rflink - espeasy
- Replies: 2
- Views: 6101
- 22 May 2017, 00:14
- Forum: ESP Easy: Hardware
- Topic: [Fixed!] Strange relay behaviour, not switching on/off on GPIO 0/1 command.
- Replies: 17
- Views: 29668
Re: Strange relay behaviour, not switching on/off on GPIO 0/1 command.
Well, i've done some research to find your module. What i see is it's running on 5V, and normally the 5V is connected to the electronic circuit too. (Jumper from JD-Vcc to Vcc). According to the offers at AliExpress the opto couplers are "low level triggered". This says that the opto coup...
- 07 May 2017, 01:46
- Forum: ESP Easy: Software
- Topic: Release v2.0.0-dev7 - possible Bug in Controller
- Replies: 44
- Views: 35133
Re: Release v2.0.0-dev7 - possible Bug in Controller
GIT version: v2.0.0-dev8
Local Time: 2017-05-07 0:39
Uptime: 2 days 13 hours 51 minutes
Load: 20% (LC=22798)
Free Mem: 23656 (16312)
this work with 12 tasks ( 8 mpc switch, 1 wifi info, 1 uptime, 1 lux, 1 temp) all sending to domotiz.
edit: more rules for each mpc switch with timerset
Local Time: 2017-05-07 0:39
Uptime: 2 days 13 hours 51 minutes
Load: 20% (LC=22798)
Free Mem: 23656 (16312)
this work with 12 tasks ( 8 mpc switch, 1 wifi info, 1 uptime, 1 lux, 1 temp) all sending to domotiz.
edit: more rules for each mpc switch with timerset
- 04 May 2017, 23:00
- Forum: ESP Easy: General Discussion
- Topic: beginners problems
- Replies: 8
- Views: 9015
Re: beginners problems
hey guys Although I am not very good at understanding the English language, I understand everything that you have tell, but it was written with the preposito to alert for situations that were happening in the forum / wiki at there time. Although I do not belong to the programmer career I can underst...
- 02 May 2017, 10:41
- Forum: Experimental
- Topic: ESP Easy Mega
- Replies: 249
- Views: 912558
Re: ESP Easy Mega
I've added checks to prevent crashes when someone uses invalid timer values. However that check was off-by-one. Latest commit fixes it. Valid timers are 1 through 8 (inclusive). Also setting a timer to 0 sec disables it. This is usefull to create events that start and stop repeating timers: I use t...
- 30 Apr 2017, 13:57
- Forum: Experimental
- Topic: ESP Easy Mega
- Replies: 249
- Views: 912558
Re: ESP Easy Mega
hi
its any problem with timerset 8,10?
i can put work the 1,2,3,4,5,6,7 but the 8 dont work.
and the timerset with 0 sec dont work either,
its any problem with timerset 8,10?
i can put work the 1,2,3,4,5,6,7 but the 8 dont work.
and the timerset with 0 sec dont work either,
- 22 Apr 2017, 10:02
- Forum: ESP Easy: General Discussion
- Topic: Feature request****Pulse GPIO command for MCP23017
- Replies: 11
- Views: 10482
Re: Feature request****Pulse GPIO command for MCP23017
this command inst on output seccion but in reference command.
see here
https://www.letscontrolit.com/wiki/inde ... _Reference
see here
https://www.letscontrolit.com/wiki/inde ... _Reference
- 21 Apr 2017, 10:35
- Forum: ESP Easy: General Discussion
- Topic: Feature request****Pulse GPIO command for MCP23017
- Replies: 11
- Views: 10482
Re: Feature request****Pulse GPIO command for MCP23017
Did you try this?
MCPPulse Plugin Pulse control on MCP23017 output pins See:MCP23017
MCPLongPulse Plugin Long pulse control on MCP23017 output pins See:MCP23017
MCPPulse Plugin Pulse control on MCP23017 output pins See:MCP23017
MCPLongPulse Plugin Long pulse control on MCP23017 output pins See:MCP23017
- 10 Apr 2017, 10:00
- Forum: ESP Easy: Software
- Topic: Simple rules
- Replies: 2
- Views: 3985
Re: Simple rules
you have to enable the NTP and the espeasy need to have internet. On Clock#Time=All,10:00 do // every day at 10:00 hours do ... gpio,2,0 timerset,1,10 endon On Clock#Time=All,22:00 do // every day at 22:00 hours do ... gpio,2,0 timerset,1,10 endon On Rules#Timer=1 do //When Timer1 expires, do gpio,2...
- 19 Mar 2017, 13:59
- Forum: Experimental
- Topic: ESP Easy Mega
- Replies: 249
- Views: 912558
Re: ESP Easy Mega
hi, its any change to continuos develop more fautures for MCP23017? because with 12 task we are limited and mcp have 16 ports, ok i know that can control it by http but inst the same, because every guys how have sonoff relay board wih push swict inside can put all work because 1 task is for relay an...
- 23 Jan 2017, 18:15
- Forum: ESP Easy: Software
- Topic: DS18B20 chain
- Replies: 5
- Views: 6294
Re: DS18B20 chain
my sugestion is to add only 1 for you understand how, next go to more
- 23 Jan 2017, 18:13
- Forum: ESP Easy: Software
- Topic: DS18B20 chain
- Replies: 5
- Views: 6294
Re: DS18B20 chain
you have to create a virtual sensors at domoticz, each sensor have a idx, so when you put the chain on espeasy i will configurate each ds18b20 with each task and inside the task you have all field you want, like idx. atention that the first time you create a task and select ds18b20 sensor you have t...
- 23 Jan 2017, 17:57
- Forum: ESP Easy: Software
- Topic: DS18B20 chain
- Replies: 5
- Views: 6294
Re: DS18B20 chain
yes, its is possible to put more than 1 temp sensor.
each sensor will require create a task and one idx to send to controller.
each sensor will require create a task and one idx to send to controller.
- 15 Jan 2017, 00:42
- Forum: ESP Easy: General Discussion
- Topic: delete a Device ?
- Replies: 5
- Views: 6687
Re: delete a Device ?
on each device you have the edit button, here you can edit to the first line (empty line) and submit.
- 12 Jan 2017, 23:01
- Forum: ESP Easy: Software
- Topic: WIFI AP or STA mode detection within rules
- Replies: 2
- Views: 5885
Re: WIFI AP or STA mode detection within rules
i think that you may want is like this example:
- run scenes/switch by controller timer, but when goes controller goes off will run the clock rules by Espeasy, its like that?
this is a feature that i if came will do myself happy
- run scenes/switch by controller timer, but when goes controller goes off will run the clock rules by Espeasy, its like that?
this is a feature that i if came will do myself happy
- 08 Jan 2017, 21:18
- Forum: ESP Easy: Software
- Topic: TimerStop Rule
- Replies: 5
- Views: 7812
Re: TimerStop Rule
thanks, i think that all reboot was from breadboard so i will do a pcb to try because now its more stable. the relay board is runing with power from 24vac- 5vdc converter and not by esp12f.(3.3V), have too on pcb for future propose the capacitor field. Be careful with the 5V supply to the relay boa...
- 07 Jan 2017, 23:59
- Forum: ESP Easy: Software
- Topic: TimerStop Rule
- Replies: 5
- Views: 7812
Re: TimerStop Rule
i tried what you said and work fine, even with 0s, it stop the first time command. so this are a little modification that can be done on my rules, only with a little problem Current size: 2133 characters (Max 2048) :D On System#Boot do MCPGPIO,1,1 delay 10 MCPGPIO,2,1 delay 10 MCPGPIO,3,1 delay 10 M...
- 07 Jan 2017, 23:10
- Forum: ESP Easy: Software
- Topic: TimerStop Rule
- Replies: 5
- Views: 7812
Re: TimerStop Rule
thanks, i think that all reboot was from breadboard so i will do a pcb to try because now its more stable. the relay board is runing with power from 24vac- 5vdc converter and not by esp12f.(3.3V), have too on pcb for future propose the capacitor field. and at this moment i have this rules: On System...
- 07 Jan 2017, 20:53
- Forum: ESP Easy: General Discussion
- Topic: wiki Github link
- Replies: 0
- Views: 2655
wiki Github link
hi,
on wiki the link to the Github say "This organization has no public repositories." so its better to edit the link to https://github.com/letscontrolit/ESPEasy
thanks
on wiki the link to the Github say "This organization has no public repositories." so its better to edit the link to https://github.com/letscontrolit/ESPEasy
thanks
- 31 Dec 2016, 23:14
- Forum: ESP Easy: Hardware
- Topic: which esp8266 module to buy?
- Replies: 5
- Views: 6891
Re: which esp8266 module to buy?
i think that without eletronic knowledge the best are the Wemos D1 mini, because have many acessories like relay, etc..
happy new year
happy new year
- 18 Dec 2016, 21:37
- Forum: ESP Easy: Software
- Topic: TimerStop Rule
- Replies: 5
- Views: 7812
TimerStop Rule
hi guys thanks for the work that all have done. i am thinking about this rules command "TimerStop" that dont are implemmented, i wonder that was a good idea to save memory when its is runing the timerset command. So i will give a example: i have domoticz to send http command to start event...
- 27 Nov 2016, 23:21
- Forum: Experimental
- Topic: ESP Easy Mega
- Replies: 249
- Views: 912558
Re: ESP Easy Mega
hi
it is possible to add more task on devices?
Because the MCP23017 have 16 Output so only have 12 on espeasy.
thanks
it is possible to add more task on devices?
Because the MCP23017 have 16 Output so only have 12 on espeasy.
thanks
- 18 Nov 2016, 20:14
- Forum: ESP Easy: Hardware
- Topic: DS18B20 Temperature sensor - missing/wrong infos at Wiki
- Replies: 2
- Views: 3959
Re: DS18B20 Temperature sensor - missing/wrong infos at Wiki
IDX are the number of sensor on the controller like domoticz to send value from espeasy to controller. i have 3 temp ds18b20 working good, each one have a resistor 4k7. on espeasy you have to add temperature- ds18b20 on devices, if you have 3 that means you have to add 3 temperature- ds18b20 devices...
- 02 Nov 2016, 13:33
- Forum: ESP Easy: General Discussion
- Topic: beginners problems
- Replies: 8
- Views: 9015
beginners problems
hi people, Is with very pleased to see the development of this good project, which has brought a economic and intuitive fresh air in the area IOT. With this also benefiting from the equipment comes to the end users that do not need advanced knowledge of electronics. But any project has to have a goo...
- 31 Oct 2016, 21:50
- Forum: ESP Easy: Software
- Topic: Bug? timerSet dont work
- Replies: 0
- Views: 2586
Bug? timerSet dont work
hi in my testings i discovere that timerset with 2 digits dont work. like this: On botao2#Switch=1 do if [rele2#Switch]=1 MCPGPIO,8,0 timerSet 10,10 endif endon On botao2#Switch=1 do if [rele2#Switch]=0 MCPGPIO,8,1 endif endon on Rules#Timer=10 do MCPGPIO,8,1 endon when i change to "timerSet 9,...
- 25 Oct 2016, 23:58
- Forum: ESP Easy: Software
- Topic: MCP23017 and boot state
- Replies: 1
- Views: 3306
Re: MCP23017 and boot state
can we put the MCP23017 on rules to control yours i2c gpio?
thanks
thanks
- 20 Oct 2016, 23:18
- Forum: ESP Easy: Software
- Topic: Rules examples
- Replies: 41
- Views: 77323
Re: Rules examples
i had a problem, i think it is the rule: this is the log of domoticz switch actived by relay on wemos. 2016-10-20 21:45:40 Off 2016-10-20 21:45:37 On 2016-10-20 21:37:54 Off 2016-10-20 21:37:51 On 2016-10-20 21:26:12 Off 2016-10-20 21:26:09 On 2016-10-20 20:14:37 Off 2016-10-20 20:14:34 On 2016-10-2...
- 18 Oct 2016, 23:27
- Forum: ESP Easy: Software
- Topic: Rules examples
- Replies: 41
- Views: 77323
Re: Rules examples
hi i have a wemos D1 mini with 1 relay and 2 ds18b20 and my goal is to put this with rules comparation. i have test with: On temp2#Temperature>temp1#Temperature do gpio,5,0 endon On temp1#Temperature>temp2#Temperature do gpio,5,1 endon but like i have 10s for temp sensor delay so after this time the...
- 14 Oct 2016, 23:48
- Forum: ESP Easy: Software
- Topic: Error flash arduino IDE
- Replies: 3
- Views: 5598
Re: Error flash arduino IDE
thanksmoelski but now i have this error O rascunho usa 221.999 bytes (51%) do espaço de armazenamento do programa. O máximo é 434.160 bytes. Variáveis globais usam 31.564 bytes (38%) de memória dinâmica, restando 50.356 bytes para variáveis locais. O maximo é 81.920 bytes. error: failed reading byte...
- 11 Oct 2016, 23:19
- Forum: ESP Easy: Software
- Topic: Error flash arduino IDE
- Replies: 3
- Views: 5598
Error flash arduino IDE
Hi, i have a new computer and want to flash more esp modules but now iam facing a new chellenge :( i cant flash because see errors i instaled arduino 1.6.5 with library 210. Arduino: 1.6.5 (Windows 7), Placa:"Generic ESP8266 Module, Serial, 80 MHz, 40MHz, DIO, 115200, 512K (64K SPIFFS), ck, Dis...
- 05 Sep 2016, 00:00
- Forum: ESP Easy: Software
- Topic: compare temps
- Replies: 0
- Views: 2606
compare temps
hi,
it is possible to compare to temp sensor on easyesp?
like:
on temp1<temp2+1 do
gpio,2,0
else
gpio,2,1
endon
this is to aplicate on winter water heater pump.
thank
it is possible to compare to temp sensor on easyesp?
like:
on temp1<temp2+1 do
gpio,2,0
else
gpio,2,1
endon
this is to aplicate on winter water heater pump.
thank
- 16 Jun 2016, 11:25
- Forum: ESP Easy: Software
- Topic: When DeepSleep GPIO don't Full sleep
- Replies: 3
- Views: 5297
Re: When DeepSleep GPIO don't Full sleep
Hi deennoo
i am wainting a while for you wires schematics, i will try try to implement this.
thanks
i am wainting a while for you wires schematics, i will try try to implement this.
thanks
- 25 May 2016, 10:13
- Forum: ESP Easy: Software
- Topic: espeasy stop send data
- Replies: 0
- Views: 2686
espeasy stop send data
hi guys i have a esp8266 esp07 with espeasy v106, that at this time its my sprinkler controller. but since all was configured, i have see that every day stop sending data to domoticz at 6:00 AM, its strange because its always at same hour, at morning i have to enter on espeasy and only click at subm...
- 21 Apr 2016, 22:28
- Forum: ESP Easy: Software
- Topic: ap mode
- Replies: 3
- Views: 5142
Re: ap mode
+1
- 13 Apr 2016, 23:53
- Forum: ESP Easy: Software
- Topic: Rules examples
- Replies: 41
- Views: 77323
Re: Rules examples
If you upgrade to R100, you can now send events from http to ESP: http://<ESP-ip>/control?cmd=event,givemesomewater So you can use them in the rules tab like this example: on givemesomewater do gpio,2,1 // open valve timerSet 1,600 // 10 minute timer endon on Rules#Timer=1 do gpio,2,0 // close valv...
- 12 Apr 2016, 00:20
- Forum: ESP Easy: Software
- Topic: Rules examples
- Replies: 41
- Views: 77323
Rules examples
Thanks to bring us this type of rules that we can play with. i know that this feature stil at beta but we want to understand the "how to" to start to mesh with rules. So at this time i wonder if it is possible to put a timer on switch input like relay. my system: domoticz virtual switch on...
- 21 Mar 2016, 21:33
- Forum: ESP Easy: General Discussion
- Topic: Espeasy et jeedom
- Replies: 15
- Views: 14805
Re: Espeasy et jeedom
hi deennoo, i had sent you a PM.