Search found 115 matches

by BartSr
28 Mar 2024, 09:43
Forum: ESP Easy: General Discussion
Topic: ping a device problem
Replies: 1
Views: 6

ping a device problem

Hi, An esp can be seen via port 8266 by all other esp's in the network. There are 14 ESP's online. Error: pinging an esp from an other esp fails. whereas it was possible in the past also that esp what cannot be pinged is not in the list showing all esp's which are online. but other esp's do show com...
by BartSr
18 Mar 2024, 17:45
Forum: ESP Easy: General Discussion
Topic: modify config.dat possible?
Replies: 2
Views: 90

Re: modify config.dat possible?

TD-er, I flashed an other esp8266 than uploaded the config.dat (which I use to have from most ESP's) Also with that one it was not possible to change interval without loosing serialnumber of Dallas sensors. So I presume it has to do with cabling. For that I wondered about update config.dat and thera...
by BartSr
18 Mar 2024, 17:04
Forum: ESP Easy: General Discussion
Topic: modify config.dat possible?
Replies: 2
Views: 90

modify config.dat possible?

scenario: 10 pcs dallas 1-wire sensor hooked up to esp8266 all worked fine cable needed to be modfied, still works fine allthough sometimes a NAN error. it appears that I cannot update a device (to other 'longer' interval time) after update and once submitted sensor serialnumber is gone. As I have a...
by BartSr
18 Feb 2024, 22:40
Forum: ESP Easy: Software
Topic: several PZEM004T to esp or just one
Replies: 2
Views: 182

several PZEM004T to esp or just one

Hi!
I have read lots of forum data about PZEM004T v3.
Now I wonder about current status of hooking up numeric devices to just one esp.
As I want to monitor almost every circuit in my main distribution a single esp might be great solution.
Thanks for your thoughts.
Bart
by BartSr
14 Jan 2024, 19:06
Forum: ESP Easy: General Discussion
Topic: problem ESP32 flash
Replies: 1
Views: 2568

problem ESP32 flash

Hi, I am facing flashing a ESP-WROOM-32 To be sure it has nothing to do with a custom bin-file I used from https://td-er.nl/ESPEasy/20231225 Climate 4M Little FS SOLO1 The flash started well (needed to keep boot button a while). But it ended with error telling me Serial port not ready.. Trying to ge...
by BartSr
11 Jan 2024, 11:09
Forum: ESP Easy: General Discussion
Topic: [solved]cannot ping esp but esp keeps communicate via port 8266
Replies: 7
Views: 15190

Re: cannot ping esp but esp keeps communicate via port 8266

Thanks for your help. Problem is that I am having several different versions. So I had to reflash and happily not that difficult rile to rewrite (yes, should have a saved version...) As the airqualitymeter is still working I unscrew that one later to update. What is easiest way to get them all on sa...
by BartSr
10 Jan 2024, 23:59
Forum: ESP Easy: General Discussion
Topic: [solved]cannot ping esp but esp keeps communicate via port 8266
Replies: 7
Views: 15190

Re: cannot ping esp but esp keeps communicate via port 8266

no subject covers problem As I have several esp's I always start with a known Ip# every esl has the 8266 port in the advanced settings so all esp's are listed doen under the config tab as we speak another esp's website cannot be visited whereas it keeps doing it's job As I cannot reach the website z...
by BartSr
10 Jan 2024, 23:19
Forum: ESP Easy: General Discussion
Topic: [solved]cannot ping esp but esp keeps communicate via port 8266
Replies: 7
Views: 15190

[solved]cannot ping esp but esp keeps communicate via port 8266

I have 5 esp's who are talking to each other via port 8266
now it happens that I cannot open the website of one of these esp's. but that one keeps talking via port 8266.
how to solve such?
Bart
by BartSr
06 Jan 2024, 11:51
Forum: ESP Easy: General Discussion
Topic: garbage from pzem power meter
Replies: 3
Views: 12034

Re: garbage from pzem power meter

Well, don't no what happened but after rebooting the esp all works again like a charm.
Just like past 9 months....
by BartSr
03 Jan 2024, 23:26
Forum: ESP Easy: General Discussion
Topic: garbage from pzem power meter
Replies: 3
Views: 12034

garbage from pzem power meter

I have a pzem 016 which outputs a modbus signal this is converted to ttl and put in esp mini it worked fine for 9 months out of the blue the esp had te be reset as it was frozen than it started to provide exact correct output but sometimes a number of very many digits just if there was a negative in...
by BartSr
19 Dec 2023, 16:30
Forum: ESP Easy: General Discussion
Topic: struggle with ntp setting
Replies: 7
Views: 2944

Re: struggle with ntp setting

Hi guys. Thanks fof your help.
Indeed DNS setting was faulty.
With correct setting all works fine.
Bart
by BartSr
18 Dec 2023, 23:45
Forum: ESP Easy: General Discussion
Topic: struggle with ntp setting
Replies: 7
Views: 2944

Re: struggle with ntp setting

uh.....
how do I manage this
How is the network configuration of your ESP?
Looks like you might not have a gateway and/or DNS configured.
I also saw an a ESP getting by p2p from another ESP time data.
Bart
by BartSr
18 Dec 2023, 23:00
Forum: ESP Easy: General Discussion
Topic: struggle with ntp setting
Replies: 7
Views: 2944

struggle with ntp setting

given 12 ESP's I want to use NTP timeserver. So this is what I got after setting the NTP server. What I tried: take power off and also tried reboot. Can this be caused as all ESP's do communicate to each other? In other building with some ESP's I managed to do with same settings. It shows overthere ...
by BartSr
23 Nov 2023, 16:52
Forum: ESP Easy: Software
Topic: ping plugin
Replies: 13
Views: 2466

Re: ping plugin

The ping plugin has run for 10 days without problems. There are 5 devices to be monitored. So far so good. Today I noticed for one ESP device around 2500 fails.Interval 5 sec. But I could open the relevant website as usual. The only way to revert to 0 fails was to reboot the ESP with ping plugin. Kn...
by BartSr
13 Nov 2023, 22:26
Forum: ESP Easy: Software
Topic: how to deal with more than 1 rule
Replies: 7
Views: 1552

Re: how to deal with more than 1 rule

Ath, indeed I used Sendto for those pins as Led will be connected to it. Once I should more VAR's, dont't we gave a limit if amount? Shouldnot that be 10?
by BartSr
13 Nov 2023, 21:11
Forum: ESP Easy: Software
Topic: how to deal with more than 1 rule
Replies: 7
Views: 1552

Re: how to deal with more than 1 rule

Ath, I extended the code just today so not already all was tested and also removing all indents did not made the code better to understand. - Question: When is "on Ledweergave#State do" called? As the led's are in a bedroom I don't want the led's visible at night. So a button activates the...
by BartSr
13 Nov 2023, 20:01
Forum: ESP Easy: Software
Topic: how to deal with more than 1 rule
Replies: 7
Views: 1552

Re: how to deal with more than 1 rule

Ath, Here's my rule. No rocket science just logic. Spread over the house I have a number of ESP's monitoring the doorlocks, All these esp's provide via mqtt status to domoticz. The code downbelow is to get a central panel near bedroom which, once fired the LEDweergave button it make LED's indicate a...
by BartSr
13 Nov 2023, 19:05
Forum: ESP Easy: Software
Topic: how to deal with more than 1 rule
Replies: 7
Views: 1552

how to deal with more than 1 rule

Hi! I've written a rule which size is over 2024 bytes. But as my rule needs more memory I removed all the indents. So the rule is very hard to read now and all comments are deleted as well This is unwanted. As there are four rulesets I think here may be a solution. Q: is there a relation between the...
by BartSr
12 Nov 2023, 20:21
Forum: ESP Easy: Software
Topic: ping plugin
Replies: 13
Views: 2466

Re: ping plugin

Ath, more recent built seems to be the clue.
After boot the ping value shows zero now.

Stupid I didnot try that sooner.....

Thanks as usual!
-Bart
by BartSr
12 Nov 2023, 19:06
Forum: ESP Easy: Software
Topic: ping plugin
Replies: 13
Views: 2466

Re: ping plugin

After digging through some esp-documentation I found that pulling the rst-pin low wil have same effect as pressing rst-button. I tried by puling the rsp-pin to ground (simple using a wire) and indeed then the 0-value appears as ping-value. So the solution is to pull rst-pin low after boot. Is that p...
by BartSr
12 Nov 2023, 19:01
Forum: ESP Easy: General Discussion
Topic: webserver pops up as text only
Replies: 6
Views: 1364

Re: webserver pops up as text only

Thanks for your explanations!
I need to reread it to real understand I think.
-Bart
by BartSr
12 Nov 2023, 16:13
Forum: ESP Easy: General Discussion
Topic: webserver pops up as text only
Replies: 6
Views: 1364

Re: webserver pops up as text only

I hope you don't mind but CDN does not ring a bell for me.
by BartSr
12 Nov 2023, 13:48
Forum: ESP Easy: General Discussion
Topic: webserver pops up as text only
Replies: 6
Views: 1364

Re: webserver pops up as text only

BTW same shows up once I flash collection A from your website.
by BartSr
12 Nov 2023, 13:18
Forum: ESP Easy: General Discussion
Topic: webserver pops up as text only
Replies: 6
Views: 1364

webserver pops up as text only

Before I had the fancy webserver layout whereas 'out of the blue this seems to have changed as per screenshot.
Might be somewhere a setting? Or ....?
TIA
-Bart
by BartSr
12 Nov 2023, 13:08
Forum: ESP Easy: Software
Topic: ping plugin
Replies: 13
Views: 2466

Re: ping plugin

TD-er. I hoped that a time delay would enable the ping activity but sorry to say result not as ecpected. But after I pressed reset on NodeMCU the value 0 for fails pops up prior to have the device enabled. Any suggestion? For info also firmware data. Schermafbeelding 2023-11-12 130602.jpg Schermafbe...
by BartSr
12 Nov 2023, 11:56
Forum: ESP Easy: Software
Topic: ping plugin
Replies: 13
Views: 2466

Re: ping plugin

In addition: would it be a solution to have a rule providing a certain delay somewhere in the proces during start-up?
by BartSr
11 Nov 2023, 22:18
Forum: ESP Easy: Hardware
Topic: Display ok for esp?
Replies: 2
Views: 1013

Re: Display ok for esp?

Thanks for your extended reply on a quick question.
Bart.
by BartSr
11 Nov 2023, 11:56
Forum: ESP Easy: Software
Topic: ping plugin
Replies: 13
Views: 2466

Re: ping plugin

Well, I managed to use ping. The status is diplayed by zero (ping Ok) or a number. But once I reboot the device there is only a dash (-) iso a value. Reset of the device (nodemcu) brought back a 0 as value. How to prevent that dash-value? Using Pingset command? I am using the ping (several) to monit...
by BartSr
11 Nov 2023, 10:43
Forum: ESP Easy: Hardware
Topic: Display ok for esp?
Replies: 2
Views: 1013

Display ok for esp?

Hi. Quick question.
Is this display to be used with ESP?
TIA
Bart
Screenshot_20231111_104020_AliExpress.jpg
Screenshot_20231111_104020_AliExpress.jpg (542.76 KiB) Viewed 1013 times
by BartSr
30 Oct 2023, 23:33
Forum: ESP Easy: General Discussion
Topic: Q about esp8266 version
Replies: 5
Views: 1263

Re: Q about esp8266 version

sure, have done it many times before (same tx/rx >>usb) but never with this kind of esp. So I must do something wrong. I saw a voltage regulator on this esp so safe to use 5V.
-Bart
by BartSr
30 Oct 2023, 23:14
Forum: ESP Easy: General Discussion
Topic: Q about esp8266 version
Replies: 5
Views: 1263

Re: Q about esp8266 version

Ok rx an tx right connected lab power supply set to 5.0V ground of esp connected to ground of pc switch on esp in program mode after hooking up esp to pc pressed reset button blue led responds with flash then start flashing fails..... then I tried keeping reset button pressed during flash same resul...
by BartSr
30 Oct 2023, 21:39
Forum: ESP Easy: General Discussion
Topic: Q about esp8266 version
Replies: 5
Views: 1263

Q about esp8266 version

Hi, years ago I bought a few esp's for interfacing an old OTGW.
But.... I can't find any longer data about e.g. how to flash.
I tried flashjng with switch in 'program mode' but thaf failed after 'preparing... (website TD-er)
Any suggestions?
-Bart
by BartSr
23 Oct 2023, 23:23
Forum: ESP Easy: Software
Topic: Calculate : unknown token ---- integer conversion
Replies: 14
Views: 2053

Re: Calculate : unknown token ---- integer conversion

Ath, sure I didnot use the correct syntax for the 'equals, not equals, greater then etc'. But most important is how to validate the sensor data.
by BartSr
23 Oct 2023, 21:10
Forum: ESP Easy: Software
Topic: Calculate : unknown token ---- integer conversion
Replies: 14
Views: 2053

Re: Calculate : unknown token ---- integer conversion

@chromo23
sure, that's it... (mixed up Domoticz dzVent syntax)

@ TD-er and/or Ath
for this case not important but if I want to calculate with e.g. temperatures :is there a way to check a value not being NaN or should I just set the option of error value to -127 and checking for == not -127 first?
by BartSr
23 Oct 2023, 20:53
Forum: ESP Easy: Software
Topic: Calculate : unknown token ---- integer conversion
Replies: 14
Views: 2053

Re: Calculate : unknown token ---- integer conversion

Ath,

So if I understand you well this is expected to be OK?

Code: Select all

if [Power#W] < 1500 then
Publish domoticz/in, '{"idx":1010, "svalue":"[Power#W]"}'
endif
But it throws same "calculate : unknown token" error
by BartSr
23 Oct 2023, 20:00
Forum: ESP Easy: Software
Topic: Calculate : unknown token ---- integer conversion
Replies: 14
Views: 2053

Re: Calculate : unknown token ---- integer conversion

Ath,

As log showed value 26 I did not realize this might be a string-value.
But if I want to do calculation within rules, can I convert [Power#W] into numeric?

-Bart
by BartSr
23 Oct 2023, 19:57
Forum: ESP Easy: Software
Topic: Calculate : unknown token ---- integer conversion
Replies: 14
Views: 2053

Re: Calculate : unknown token ---- integer conversion

TD-er, indeed. Quotes are required.

Publish domoticz/in, '{"idx":1010, "svalue":"[int#1]"}'
Thanks!

Bart
by BartSr
23 Oct 2023, 17:52
Forum: ESP Easy: Software
Topic: Calculate : unknown token ---- integer conversion
Replies: 14
Views: 2053

Calculate : unknown token ---- integer conversion

Problem: Power-indicator in Domoticz shows sometimes very, very high value (peak) Somewhere I read this may be caused by not publishing an integer value I tried to do a rule like this but logfile shows: calculate : unknown token logEntry shows [Power#W] = 26 if [Power#W] < '1500' then Publish domoti...
by BartSr
17 Oct 2023, 18:29
Forum: ESP Easy: Software
Topic: Q about Timerset
Replies: 5
Views: 1002

Re: Q about Timerset

Hi TD-er. I changed my code to a 2.5 sec interval just for some faster checking. In final version 10 sec will be used. It seems that I overlooked to reboot. After that the rule worked ok. Regarding the logentry you added,( I still need to include) but what is the advantage? I use to have a look at t...
by BartSr
16 Oct 2023, 22:06
Forum: ESP Easy: Software
Topic: Q about Timerset
Replies: 5
Views: 1002

Re: Q about Timerset

TD-er I tried , following example but without good result. What is wrong? On System#Boot do //When the ESP boots, do looptimerset_ms,2,2500 endon On Rules#Timer=2 do Publish domoticz/in, '{ "idx":1009, "svalue":"[Energy#Wh];0;0;0;[Power#W];0"}' endon
by BartSr
16 Oct 2023, 20:18
Forum: ESP Easy: Software
Topic: Q about Timerset
Replies: 5
Views: 1002

Q about Timerset

Hi, Hereunder a simplified piece of code in rules. I want to Publish domoticz to be executed every 10 seconds. I had expected this code works but no, it does not. What is wrong? -Bart On System#Boot do timerSet,1,10 endon On Rules#Timer=1 Publish domoticz/in, '{ "idx":985, "svalue&quo...
by BartSr
12 Oct 2023, 14:14
Forum: ESP Easy: Software
Topic: ping plugin
Replies: 13
Views: 2466

Re: ping plugin

Ath and TD-er, thanks for your prompt reply. Stupid me I didnot check using ESP82 but ESP32 instead. I flashed from https://td-er.nl/ESPEasy/latest/ (most fast way for me to flash!!) using ESP_Easy_mega_20230929_collection_A_ESP8266_4M1M and it was peanuts to try this ping-option. Maybe it's somewhe...
by BartSr
12 Oct 2023, 11:57
Forum: ESP Easy: Software
Topic: ping plugin
Replies: 13
Views: 2466

ping plugin

Hi! How can I use the ping-plugin? Is there a usual binfile which includes this ? For an application I want to be sure that some other esp's (ESP82) are alive. These are sending (by rules ) status info of GPIO which I want to use in a central one (ESP32) Aim: sent open/close status of doors to centr...
by BartSr
09 Aug 2023, 19:21
Forum: ESP Easy: Hardware
Topic: dht11/22 max. wire length
Replies: 5
Views: 1445

Re: dht11/22 max. wire length

Wel, in fact the esp32 on which I want to hook on a humidity sensor is already loaded with 13 dallas temp-sensors. A tempsensor might be no problem whereas also long wiring is possible. But I need to monitor the humunity op the bathroom to see if the ex. fan must be activated at high speed
by BartSr
09 Aug 2023, 16:15
Forum: ESP Easy: Hardware
Topic: dht11/22 max. wire length
Replies: 5
Views: 1445

Re: dht11/22 max. wire length

Thanks a lot. A already was afraid for longer lenghts. Are you familar with sensor allowing longer length, say 3 or 4 meter. or a reliable battery supplied sensor. I want to control a shower exh. fan.
Bart
by BartSr
09 Aug 2023, 12:06
Forum: ESP Easy: Hardware
Topic: dht11/22 max. wire length
Replies: 5
Views: 1445

dht11/22 max. wire length

Hi, I cannot find documentation telling me what is max length of wiring of temp/ huminity sensor dht11/12.
Any idea where to find?
Bart
by BartSr
28 Jul 2023, 21:36
Forum: ESP Easy: Software
Topic: Syntaxis for reboot via rules
Replies: 5
Views: 787

Re: Syntaxis for reboot via rules

Ath, just put in rules reboot? Without any sys or % or ...? The code was custom made ( by other person) based upon 8266 but that gave way to high processor load. So switched to a 32. Lots of comm has been between TD-er and Johan (the programmer) times ago. It uses modbus from Duco vent system as inp...
by BartSr
28 Jul 2023, 19:11
Forum: ESP Easy: Software
Topic: Syntaxis for reboot via rules
Replies: 5
Views: 787

Syntaxis for reboot via rules

Hi An esp32 is used to monitor a ventilationsystem. It appears that the system crashes after about a month being online. Probably caused by memory problems. As it's hard to figure out how to overcome the grow of used memory I will go for the lazy way : regular reboot. Seems not to be difficult apart...