Search found 125 matches
- 13 May 2024, 13:38
- Forum: ESP Easy: General Discussion
- Topic: accuracy dht22 sensor
- Replies: 4
- Views: 99
Re: accuracy dht22 sensor
Ath, TD-er, Thanks for replies. I am using the assembly esp01 with dht22. Ventilation is arranged with 125mm pvc tube through wall direct to outside. No return valve included. The fan is a tubefan mounted inside the pvc tube. The esp assembly jusf behind the grid in bathroom. My first try will be to...
- 12 May 2024, 23:40
- Forum: ESP Easy: General Discussion
- Topic: accuracy dht22 sensor
- Replies: 4
- Views: 99
accuracy dht22 sensor
hi! I bought myself an esp01 equipped with dht22 temp/hum sensor. flashed it with espeasy and are using the hum% for bathroomfan regulation. The sensor seems to be very inaccurate. Hum rise from 30 to 50% for a minute or so than back to 30. This kills the proper working of the script. see https://ww...
- 27 Apr 2024, 21:06
- Forum: ESP Easy: General Discussion
- Topic: moving from domoticz to HA
- Replies: 3
- Views: 544
Re: moving from domoticz to HA
thanks for your advices. problems I further expect is the number of tasmota's. have to overthink matters.
- 25 Apr 2024, 11:03
- Forum: ESP Easy: General Discussion
- Topic: moving from domoticz to HA
- Replies: 3
- Views: 544
moving from domoticz to HA
Hi.
I consider moving from Domoticz to Homeassistant.
Step by step....
Lots of temp measuring using ds18b20 sensors hooked via espeasy and mqtt in regular way.
Some other sensors with 'publish' commands.
Is it possible to forward data to both domoticz as well as homeassistant so to safely move to ha?
I consider moving from Domoticz to Homeassistant.
Step by step....
Lots of temp measuring using ds18b20 sensors hooked via espeasy and mqtt in regular way.
Some other sensors with 'publish' commands.
Is it possible to forward data to both domoticz as well as homeassistant so to safely move to ha?
- 23 Apr 2024, 21:09
- Forum: ESP Easy: General Discussion
- Topic: esp01 dht22
- Replies: 5
- Views: 559
Re: esp01 dht22
mmm.... thought about spiff is something special....
sorry and thanks again
sorry and thanks again
- 23 Apr 2024, 20:52
- Forum: ESP Easy: General Discussion
- Topic: esp01 dht22
- Replies: 5
- Views: 559
Re: esp01 dht22
Thanks,
I looked into https://td-er.nl/ESPEasy/
but from there I might have overlooked but anyway, couldnot find a binfile .
So I did it the old-fashione dway now
'problem' solved
I looked into https://td-er.nl/ESPEasy/
but from there I might have overlooked but anyway, couldnot find a binfile .
So I did it the old-fashione dway now
'problem' solved
- 23 Apr 2024, 18:11
- Forum: ESP Easy: General Discussion
- Topic: esp01 dht22
- Replies: 5
- Views: 559
esp01 dht22
Hi, is there a binfile for using esp01 together with humidity sensor dht22
- 29 Mar 2024, 22:31
- Forum: ESP Easy: General Discussion
- Topic: ping a device problem
- Replies: 7
- Views: 2325
Re: ping a device problem
Ath, I believe that the very high load which was reported caused the esp to drop offline several times. Once load was decreased the system seems stable as before I started this very pingtask.
- 29 Mar 2024, 21:44
- Forum: ESP Easy: General Discussion
- Topic: ping a device problem
- Replies: 7
- Views: 2325
Re: ping a device problem
I pinged to 192.168.2.200 I disabled the ping task. load around 7% I enabled the task using taskenable,8 Load increases to about 77% I disabled task 8 in regular way. Load immediately drops to around 7% Might have to do with this binaire file in relation to config.dat from other binairy file? Bart
- 29 Mar 2024, 18:08
- Forum: ESP Easy: General Discussion
- Topic: ping a device problem
- Replies: 7
- Views: 2325
Re: ping a device problem
TD-er, what I found: the problem started after I added a ping task. The load then increased to 97%. Thereafter the device went down. Just a few days ago I swapped that ESP as the original ESP suffered from just text-layout iso the fancy look. Also an output-pin seems to suffer as the led, connected ...
- 28 Mar 2024, 09:43
- Forum: ESP Easy: General Discussion
- Topic: ping a device problem
- Replies: 7
- Views: 2325
ping a device problem
Hi, An esp can be seen via port 8266 by all other esp's in the network. There are 14 ESP's online. Error: pinging an esp from an other esp fails. whereas it was possible in the past also that esp what cannot be pinged is not in the list showing all esp's which are online. but other esp's do show com...
- 18 Mar 2024, 17:45
- Forum: ESP Easy: General Discussion
- Topic: modify config.dat possible?
- Replies: 2
- Views: 1335
Re: modify config.dat possible?
TD-er, I flashed an other esp8266 than uploaded the config.dat (which I use to have from most ESP's) Also with that one it was not possible to change interval without loosing serialnumber of Dallas sensors. So I presume it has to do with cabling. For that I wondered about update config.dat and thera...
- 18 Mar 2024, 17:04
- Forum: ESP Easy: General Discussion
- Topic: modify config.dat possible?
- Replies: 2
- Views: 1335
modify config.dat possible?
scenario: 10 pcs dallas 1-wire sensor hooked up to esp8266 all worked fine cable needed to be modfied, still works fine allthough sometimes a NAN error. it appears that I cannot update a device (to other 'longer' interval time) after update and once submitted sensor serialnumber is gone. As I have a...
- 20 Feb 2024, 23:10
- Forum: ESP Easy: Software
- Topic: several PZEM004T to esp or just one
- Replies: 2
- Views: 858
Re: several PZEM004T to esp or just one
No advices?
- 18 Feb 2024, 22:40
- Forum: ESP Easy: Software
- Topic: several PZEM004T to esp or just one
- Replies: 2
- Views: 858
several PZEM004T to esp or just one
Hi!
I have read lots of forum data about PZEM004T v3.
Now I wonder about current status of hooking up numeric devices to just one esp.
As I want to monitor almost every circuit in my main distribution a single esp might be great solution.
Thanks for your thoughts.
Bart
I have read lots of forum data about PZEM004T v3.
Now I wonder about current status of hooking up numeric devices to just one esp.
As I want to monitor almost every circuit in my main distribution a single esp might be great solution.
Thanks for your thoughts.
Bart
- 14 Jan 2024, 19:06
- Forum: ESP Easy: General Discussion
- Topic: problem ESP32 flash
- Replies: 1
- Views: 5679
problem ESP32 flash
Hi, I am facing flashing a ESP-WROOM-32 To be sure it has nothing to do with a custom bin-file I used from https://td-er.nl/ESPEasy/20231225 Climate 4M Little FS SOLO1 The flash started well (needed to keep boot button a while). But it ended with error telling me Serial port not ready.. Trying to ge...
- 11 Jan 2024, 18:29
- Forum: ESP Easy: General Discussion
- Topic: [solved]cannot ping esp but esp keeps communicate via port 8266
- Replies: 7
- Views: 39174
Re: [solved]cannot ping esp but esp keeps communicate via port 8266
Thanks. Going to give it a try.
-Bart
-Bart
- 11 Jan 2024, 11:09
- Forum: ESP Easy: General Discussion
- Topic: [solved]cannot ping esp but esp keeps communicate via port 8266
- Replies: 7
- Views: 39174
Re: cannot ping esp but esp keeps communicate via port 8266
Thanks for your help. Problem is that I am having several different versions. So I had to reflash and happily not that difficult rile to rewrite (yes, should have a saved version...) As the airqualitymeter is still working I unscrew that one later to update. What is easiest way to get them all on sa...
- 10 Jan 2024, 23:59
- Forum: ESP Easy: General Discussion
- Topic: [solved]cannot ping esp but esp keeps communicate via port 8266
- Replies: 7
- Views: 39174
Re: cannot ping esp but esp keeps communicate via port 8266
no subject covers problem As I have several esp's I always start with a known Ip# every esl has the 8266 port in the advanced settings so all esp's are listed doen under the config tab as we speak another esp's website cannot be visited whereas it keeps doing it's job As I cannot reach the website z...
- 10 Jan 2024, 23:19
- Forum: ESP Easy: General Discussion
- Topic: [solved]cannot ping esp but esp keeps communicate via port 8266
- Replies: 7
- Views: 39174
[solved]cannot ping esp but esp keeps communicate via port 8266
I have 5 esp's who are talking to each other via port 8266
now it happens that I cannot open the website of one of these esp's. but that one keeps talking via port 8266.
how to solve such?
Bart
now it happens that I cannot open the website of one of these esp's. but that one keeps talking via port 8266.
how to solve such?
Bart
- 06 Jan 2024, 11:51
- Forum: ESP Easy: General Discussion
- Topic: garbage from pzem power meter
- Replies: 3
- Views: 29907
Re: garbage from pzem power meter
Well, don't no what happened but after rebooting the esp all works again like a charm.
Just like past 9 months....
Just like past 9 months....
- 03 Jan 2024, 23:26
- Forum: ESP Easy: General Discussion
- Topic: garbage from pzem power meter
- Replies: 3
- Views: 29907
garbage from pzem power meter
I have a pzem 016 which outputs a modbus signal this is converted to ttl and put in esp mini it worked fine for 9 months out of the blue the esp had te be reset as it was frozen than it started to provide exact correct output but sometimes a number of very many digits just if there was a negative in...
- 19 Dec 2023, 16:30
- Forum: ESP Easy: General Discussion
- Topic: struggle with ntp setting
- Replies: 7
- Views: 3531
Re: struggle with ntp setting
Hi guys. Thanks fof your help.
Indeed DNS setting was faulty.
With correct setting all works fine.
Bart
Indeed DNS setting was faulty.
With correct setting all works fine.
Bart
- 18 Dec 2023, 23:45
- Forum: ESP Easy: General Discussion
- Topic: struggle with ntp setting
- Replies: 7
- Views: 3531
Re: struggle with ntp setting
uh.....
how do I manage this
Bart
how do I manage this
I also saw an a ESP getting by p2p from another ESP time data.How is the network configuration of your ESP?
Looks like you might not have a gateway and/or DNS configured.
Bart
- 18 Dec 2023, 23:00
- Forum: ESP Easy: General Discussion
- Topic: struggle with ntp setting
- Replies: 7
- Views: 3531
struggle with ntp setting
given 12 ESP's I want to use NTP timeserver. So this is what I got after setting the NTP server. What I tried: take power off and also tried reboot. Can this be caused as all ESP's do communicate to each other? In other building with some ESP's I managed to do with same settings. It shows overthere ...
- 23 Nov 2023, 16:52
- Forum: ESP Easy: Software
- Topic: ping plugin
- Replies: 13
- Views: 3295
Re: ping plugin
The ping plugin has run for 10 days without problems. There are 5 devices to be monitored. So far so good. Today I noticed for one ESP device around 2500 fails.Interval 5 sec. But I could open the relevant website as usual. The only way to revert to 0 fails was to reboot the ESP with ping plugin. Kn...
- 13 Nov 2023, 22:26
- Forum: ESP Easy: Software
- Topic: how to deal with more than 1 rule
- Replies: 7
- Views: 2008
Re: how to deal with more than 1 rule
Ath, indeed I used Sendto for those pins as Led will be connected to it. Once I should more VAR's, dont't we gave a limit if amount? Shouldnot that be 10?
- 13 Nov 2023, 21:11
- Forum: ESP Easy: Software
- Topic: how to deal with more than 1 rule
- Replies: 7
- Views: 2008
Re: how to deal with more than 1 rule
Ath, I extended the code just today so not already all was tested and also removing all indents did not made the code better to understand. - Question: When is "on Ledweergave#State do" called? As the led's are in a bedroom I don't want the led's visible at night. So a button activates the...
- 13 Nov 2023, 20:01
- Forum: ESP Easy: Software
- Topic: how to deal with more than 1 rule
- Replies: 7
- Views: 2008
Re: how to deal with more than 1 rule
Ath, Here's my rule. No rocket science just logic. Spread over the house I have a number of ESP's monitoring the doorlocks, All these esp's provide via mqtt status to domoticz. The code downbelow is to get a central panel near bedroom which, once fired the LEDweergave button it make LED's indicate a...
- 13 Nov 2023, 19:05
- Forum: ESP Easy: Software
- Topic: how to deal with more than 1 rule
- Replies: 7
- Views: 2008
how to deal with more than 1 rule
Hi! I've written a rule which size is over 2024 bytes. But as my rule needs more memory I removed all the indents. So the rule is very hard to read now and all comments are deleted as well This is unwanted. As there are four rulesets I think here may be a solution. Q: is there a relation between the...
- 12 Nov 2023, 20:21
- Forum: ESP Easy: Software
- Topic: ping plugin
- Replies: 13
- Views: 3295
Re: ping plugin
Ath, more recent built seems to be the clue.
After boot the ping value shows zero now.
Stupid I didnot try that sooner.....
Thanks as usual!
-Bart
After boot the ping value shows zero now.
Stupid I didnot try that sooner.....
Thanks as usual!
-Bart
- 12 Nov 2023, 19:06
- Forum: ESP Easy: Software
- Topic: ping plugin
- Replies: 13
- Views: 3295
Re: ping plugin
After digging through some esp-documentation I found that pulling the rst-pin low wil have same effect as pressing rst-button. I tried by puling the rsp-pin to ground (simple using a wire) and indeed then the 0-value appears as ping-value. So the solution is to pull rst-pin low after boot. Is that p...
- 12 Nov 2023, 19:01
- Forum: ESP Easy: General Discussion
- Topic: webserver pops up as text only
- Replies: 6
- Views: 1822
Re: webserver pops up as text only
Thanks for your explanations!
I need to reread it to real understand I think.
-Bart
I need to reread it to real understand I think.
-Bart
- 12 Nov 2023, 16:13
- Forum: ESP Easy: General Discussion
- Topic: webserver pops up as text only
- Replies: 6
- Views: 1822
Re: webserver pops up as text only
I hope you don't mind but CDN does not ring a bell for me.
- 12 Nov 2023, 13:48
- Forum: ESP Easy: General Discussion
- Topic: webserver pops up as text only
- Replies: 6
- Views: 1822
Re: webserver pops up as text only
BTW same shows up once I flash collection A from your website.
- 12 Nov 2023, 13:18
- Forum: ESP Easy: General Discussion
- Topic: webserver pops up as text only
- Replies: 6
- Views: 1822
webserver pops up as text only
Before I had the fancy webserver layout whereas 'out of the blue this seems to have changed as per screenshot.
Might be somewhere a setting? Or ....?
TIA
-Bart
Might be somewhere a setting? Or ....?
TIA
-Bart
- 12 Nov 2023, 13:08
- Forum: ESP Easy: Software
- Topic: ping plugin
- Replies: 13
- Views: 3295
Re: ping plugin
TD-er. I hoped that a time delay would enable the ping activity but sorry to say result not as ecpected. But after I pressed reset on NodeMCU the value 0 for fails pops up prior to have the device enabled. Any suggestion? For info also firmware data. Schermafbeelding 2023-11-12 130602.jpg Schermafbe...
- 12 Nov 2023, 11:56
- Forum: ESP Easy: Software
- Topic: ping plugin
- Replies: 13
- Views: 3295
Re: ping plugin
In addition: would it be a solution to have a rule providing a certain delay somewhere in the proces during start-up?
- 11 Nov 2023, 22:18
- Forum: ESP Easy: Hardware
- Topic: Display ok for esp?
- Replies: 2
- Views: 1757
Re: Display ok for esp?
Thanks for your extended reply on a quick question.
Bart.
Bart.
- 11 Nov 2023, 11:56
- Forum: ESP Easy: Software
- Topic: ping plugin
- Replies: 13
- Views: 3295
Re: ping plugin
Well, I managed to use ping. The status is diplayed by zero (ping Ok) or a number. But once I reboot the device there is only a dash (-) iso a value. Reset of the device (nodemcu) brought back a 0 as value. How to prevent that dash-value? Using Pingset command? I am using the ping (several) to monit...
- 11 Nov 2023, 10:43
- Forum: ESP Easy: Hardware
- Topic: Display ok for esp?
- Replies: 2
- Views: 1757
Display ok for esp?
Hi. Quick question.
Is this display to be used with ESP?
TIA
Bart
Is this display to be used with ESP?
TIA
Bart
- 30 Oct 2023, 23:33
- Forum: ESP Easy: General Discussion
- Topic: Q about esp8266 version
- Replies: 5
- Views: 1563
Re: Q about esp8266 version
sure, have done it many times before (same tx/rx >>usb) but never with this kind of esp. So I must do something wrong. I saw a voltage regulator on this esp so safe to use 5V.
-Bart
-Bart
- 30 Oct 2023, 23:14
- Forum: ESP Easy: General Discussion
- Topic: Q about esp8266 version
- Replies: 5
- Views: 1563
Re: Q about esp8266 version
Ok rx an tx right connected lab power supply set to 5.0V ground of esp connected to ground of pc switch on esp in program mode after hooking up esp to pc pressed reset button blue led responds with flash then start flashing fails..... then I tried keeping reset button pressed during flash same resul...
- 30 Oct 2023, 21:39
- Forum: ESP Easy: General Discussion
- Topic: Q about esp8266 version
- Replies: 5
- Views: 1563
Q about esp8266 version
Hi, years ago I bought a few esp's for interfacing an old OTGW.
But.... I can't find any longer data about e.g. how to flash.
I tried flashjng with switch in 'program mode' but thaf failed after 'preparing... (website TD-er)
Any suggestions?
-Bart
But.... I can't find any longer data about e.g. how to flash.
I tried flashjng with switch in 'program mode' but thaf failed after 'preparing... (website TD-er)
Any suggestions?
-Bart
- 23 Oct 2023, 23:23
- Forum: ESP Easy: Software
- Topic: Calculate : unknown token ---- integer conversion
- Replies: 14
- Views: 2925
Re: Calculate : unknown token ---- integer conversion
Ath, sure I didnot use the correct syntax for the 'equals, not equals, greater then etc'. But most important is how to validate the sensor data.
- 23 Oct 2023, 21:10
- Forum: ESP Easy: Software
- Topic: Calculate : unknown token ---- integer conversion
- Replies: 14
- Views: 2925
Re: Calculate : unknown token ---- integer conversion
@chromo23
sure, that's it... (mixed up Domoticz dzVent syntax)
@ TD-er and/or Ath
for this case not important but if I want to calculate with e.g. temperatures :is there a way to check a value not being NaN or should I just set the option of error value to -127 and checking for == not -127 first?
sure, that's it... (mixed up Domoticz dzVent syntax)
@ TD-er and/or Ath
for this case not important but if I want to calculate with e.g. temperatures :is there a way to check a value not being NaN or should I just set the option of error value to -127 and checking for == not -127 first?
- 23 Oct 2023, 20:53
- Forum: ESP Easy: Software
- Topic: Calculate : unknown token ---- integer conversion
- Replies: 14
- Views: 2925
Re: Calculate : unknown token ---- integer conversion
Ath,
So if I understand you well this is expected to be OK?
But it throws same "calculate : unknown token" error
So if I understand you well this is expected to be OK?
Code: Select all
if [Power#W] < 1500 then
Publish domoticz/in, '{"idx":1010, "svalue":"[Power#W]"}'
endif
- 23 Oct 2023, 20:00
- Forum: ESP Easy: Software
- Topic: Calculate : unknown token ---- integer conversion
- Replies: 14
- Views: 2925
Re: Calculate : unknown token ---- integer conversion
Ath,
As log showed value 26 I did not realize this might be a string-value.
But if I want to do calculation within rules, can I convert [Power#W] into numeric?
-Bart
As log showed value 26 I did not realize this might be a string-value.
But if I want to do calculation within rules, can I convert [Power#W] into numeric?
-Bart
- 23 Oct 2023, 19:57
- Forum: ESP Easy: Software
- Topic: Calculate : unknown token ---- integer conversion
- Replies: 14
- Views: 2925
Re: Calculate : unknown token ---- integer conversion
TD-er, indeed. Quotes are required.
Publish domoticz/in, '{"idx":1010, "svalue":"[int#1]"}'
Thanks!
Bart
Publish domoticz/in, '{"idx":1010, "svalue":"[int#1]"}'
Thanks!
Bart
- 23 Oct 2023, 17:52
- Forum: ESP Easy: Software
- Topic: Calculate : unknown token ---- integer conversion
- Replies: 14
- Views: 2925
Calculate : unknown token ---- integer conversion
Problem: Power-indicator in Domoticz shows sometimes very, very high value (peak) Somewhere I read this may be caused by not publishing an integer value I tried to do a rule like this but logfile shows: calculate : unknown token logEntry shows [Power#W] = 26 if [Power#W] < '1500' then Publish domoti...