Thx for that clarification.
Looks like I had understood the On .. Endon completely wrong initially
It works, and it creates a lot less log entries .. which I believe is intended and good for the device's memory write cycles.
Search found 119 matches
- 19 Feb 2023, 17:41
- Forum: ESP Easy: General Discussion
- Topic: rules issue >#1
- Replies: 5
- Views: 1092
- 17 Feb 2023, 23:53
- Forum: ESP Easy: General Discussion
- Topic: rules issue >#1
- Replies: 5
- Views: 1092
Re: rules issue >#1
Didn't get it, sorry. 1. AlphaEss#solarPLUS is set by external device: SendTo 11,"TaskValueSet 4,1,[tempIs#hwtank]" 2. Just wanted to test it using browser: .../control?cmd=taskvalueset,6,1,1 Will 1. work and execute what's between On..Endon? How to fire for test? ../control?cmd=taskrun,6?...
- 16 Feb 2023, 18:02
- Forum: ESP Easy: General Discussion
- Topic: rules issue >#1
- Replies: 5
- Views: 1092
rules issue >#1
certainly a beginner's mistake, but I can't get it to work: Excerpt from rules section: On AlphaEss#solarPLUS=1 Do // tried without '=1', no change GPIO,16,1 If [AlphaEss#solarPLUS]=1 And [Heating#isAllowed]=1 If %systime% > 14:00:00 And [tempIs_THR320D_No1#hwtank] < 55.0 GPIO,16,1 Endif Endif Endon...
- 16 Feb 2023, 17:45
- Forum: ESP Easy: Projects / Applications
- Topic: IFTTT: special characters, Umlaute
- Replies: 4
- Views: 1609
Re: IFTTT: special characters, Umlaute
sorry, but same result: °
- 14 Feb 2023, 20:40
- Forum: ESP Easy: General Discussion
- Topic: New Sonoff Pow "Origin"
- Replies: 6
- Views: 1435
Re: New Sonoff Pow "Origin"
don't know the POW version but the THR320 seems very reliable, well designed, as far as I can say with not being liable for anything ;) Two disadvantages: it's getting a bit warm though, which suggests it's somehow wasting energy nothing to secure the cable to prevent the bare copper when accidental...
- 14 Feb 2023, 20:34
- Forum: ESP Easy: Projects / Applications
- Topic: IFTTT: special characters, Umlaute
- Replies: 4
- Views: 1609
Re: IFTTT: special characters, Umlaute
same result unfortunately: °
- 14 Feb 2023, 13:30
- Forum: ESP Easy: General Discussion
- Topic: extending timers?
- Replies: 1
- Views: 734
extending timers?
I'm wondering when using a timer in the rules' section, will another use of the same timer 'extend' its time? E.g. timerSet,1, 1800 // something ON for 30min waiting for let's say 10min timerSet,1, 1800 // something ON for 30min On Rules#Timer=1 do // switch OFF the 'something' Would the 'something'...
- 14 Feb 2023, 13:24
- Forum: ESP Easy: General Discussion
- Topic: New Sonoff Pow "Origin"
- Replies: 6
- Views: 1435
Re: New Sonoff Pow "Origin"
great picture, thx. Since today I'm operating my second THR320D. Just in case you need some details the board's search might help you or others interested in it. The 'golden line of contacts' on the PCB (I'm guessing it's designed for the display) shows SonOff is doing it like we do it at work: sell...
- 14 Feb 2023, 13:19
- Forum: ESP Easy: Projects / Applications
- Topic: IFTTT: special characters, Umlaute
- Replies: 4
- Views: 1609
IFTTT: special characters, Umlaute
Seeking for help: do you know if it's possible to send special characters like the 'degree char' ° or German Umlaute using ESPEasy rules to IFTTT and receive those ones later on the cell phone? How ;-) Have tried some codings, best shot was an output like '°'. Currently I'm sending the string direc...
- 11 Feb 2023, 11:03
- Forum: ESP Easy: Hardware
- Topic: Any advice? Automated rotary knob
- Replies: 24
- Views: 4110
Re: Any advice? Automated rotary knob
Software as well as servo control are working fine. I also found a nice place to mount the servo so it will not disturb. Unfortunately, I didn't manage to turn the switch by using a servo. The switch has an approx. 3cm long spindle which is then attached to the onboard switch - which I obviously doe...
- 03 Jan 2023, 17:14
- Forum: ESP Easy: Hardware
- Topic: Any advice? Automated rotary knob
- Replies: 24
- Views: 4110
- 03 Jan 2023, 17:13
- Forum: ESP Easy: Hardware
- Topic: Any advice? Automated rotary knob
- Replies: 24
- Views: 4110
Re: Any advice? Automated rotary knob
upuh, wanted to use less not more
- 03 Jan 2023, 16:12
- Forum: ESP Easy: Hardware
- Topic: Any advice? Automated rotary knob
- Replies: 24
- Views: 4110
Re: Any advice? Automated rotary knob
not sure if I understood that correctly .. I'm now trying with a test installation on an ESP32, no memory restrictions. Servo is working, I'd say okay. Is there a chance to stop preventing the servo from continuous positioning', let's say half a second after firing the command? Oh, maybe I simply ne...
- 03 Jan 2023, 15:18
- Forum: ESP Easy: Hardware
- Topic: Any advice? Automated rotary knob
- Replies: 24
- Views: 4110
Re: Any advice? Automated rotary knob
no worries, didn't thought it would be that easy to detect why it's not running
- 03 Jan 2023, 15:02
- Forum: ESP Easy: Hardware
- Topic: Any advice? Automated rotary knob
- Replies: 24
- Views: 4110
Re: Any advice? Automated rotary knob
uhm,
589640: HTTP: Servo,1,14,45
589642: SERVO : command not included in build
596422: EVENT: Clock#Time=Tue,15:02
589640: HTTP: Servo,1,14,45
589642: SERVO : command not included in build
596422: EVENT: Clock#Time=Tue,15:02
- 03 Jan 2023, 14:31
- Forum: ESP Easy: Hardware
- Topic: Any advice? Automated rotary knob
- Replies: 24
- Views: 4110
Re: Any advice? Automated rotary knob
Assuming you have a wemos d1 mini for example: There are three cables from the servo to the wemos d1 mini and one usb cable from the microcontroller to the usb power adapter before moving too deep into the configuration: 'Motor - PWM Motor' is the correct device to choose from (saw that the device'...
- 03 Jan 2023, 14:25
- Forum: ESP Easy: Hardware
- Topic: Any advice? Automated rotary knob
- Replies: 24
- Views: 4110
Re: Any advice? Automated rotary knob
amazingly the device above was strong enough to turn the heating. However I wasn't able to flash it as I didn't spot the necessary PIN's.
Also Alexa integration worked only partly: linking the device was successful, controlling the device wasn't.
Pity.
Also Alexa integration worked only partly: linking the device was successful, controlling the device wasn't.
Pity.
- 29 Dec 2022, 17:37
- Forum: ESP Easy: Hardware
- Topic: Any advice? Automated rotary knob
- Replies: 24
- Views: 4110
Re: Any advice? Automated rotary knob
Just for info, as one failing should be enough:
the device already shown before is battery operated but can move in one direction only, despite the four arrows .. The chip used looks like an ESP but somehow smaller and not branded.
the device already shown before is battery operated but can move in one direction only, despite the four arrows .. The chip used looks like an ESP but somehow smaller and not branded.
- 29 Dec 2022, 09:06
- Forum: ESP Easy: Hardware
- Topic: Any advice? Automated rotary knob
- Replies: 24
- Views: 4110
Re: Any advice? Automated rotary knob
Know what you're talking about as/although I don't own one, but for things like these the diy area should provide enough material.
I'm at the moment more afraid of the parts you won't print like all the cables, two differing mains adapters, outlet, ..
I'm at the moment more afraid of the parts you won't print like all the cables, two differing mains adapters, outlet, ..
- 28 Dec 2022, 17:42
- Forum: ESP Easy: Hardware
- Topic: Any advice? Automated rotary knob
- Replies: 24
- Views: 4110
Re: Any advice? Automated rotary knob
Hi, switching between heating and heating+warm water would be great, if one direction only is possible that'll help, too
- 28 Dec 2022, 11:07
- Forum: ESP Easy: Hardware
- Topic: Any advice? Automated rotary knob
- Replies: 24
- Views: 4110
Re: Any advice? Automated rotary knob
Not easy to answer, a hand can do pretty easily.
But I even thought of not getting to deep into the bits and pieces.
Idea came from when I saw this Obviously too weak
But I even thought of not getting to deep into the bits and pieces.
Idea came from when I saw this Obviously too weak
- 28 Dec 2022, 10:06
- Forum: ESP Easy: Hardware
- Topic: Any advice? Automated rotary knob
- Replies: 24
- Views: 4110
Any advice? Automated rotary knob
Hi, Wondering if one of the readers here eventually knows a way to automate a rotary knob like the one pictured.
I do not want to get in touch with anything hiding behind the front panel ..
I do not want to get in touch with anything hiding behind the front panel ..
- 17 Dec 2022, 13:42
- Forum: ESP Easy: Software
- Topic: sysweekday_s
- Replies: 1
- Views: 940
sysweekday_s
Hi, could one please help with the syntax for %sysweekday_s%, can't get it to work. Tried lower case, as "string", the one below, .. On Clock#Time=All,07:00 do If %sysweekday_s%=Sat // Else TaskValueSet 5,1,[tempIs#tube]+0.2 Endif %sysweekday% is working as intended. The not-operation woul...
- 15 Dec 2022, 18:40
- Forum: ESP Easy: General Discussion
- Topic: capacitive soil moisture sensor v1.2 again
- Replies: 24
- Views: 12471
Re: capacitive soil moisture sensor v1.2 again
well well well, not really reliable (changed interval to 15min meanwhile) ..
- 14 Dec 2022, 16:55
- Forum: ESP Easy: General Discussion
- Topic: capacitive soil moisture sensor v1.2 again
- Replies: 24
- Views: 12471
Re: capacitive soil moisture sensor v1.2 again
looking a lot better and I believe I have to accept the relatively small deviations now ..
- 11 Dec 2022, 14:04
- Forum: ESP Easy: General Discussion
- Topic: capacitive soil moisture sensor v1.2 again
- Replies: 24
- Views: 12471
Re: capacitive soil moisture sensor v1.2 again
oversampling active, yes.
- 11 Dec 2022, 13:47
- Forum: ESP Easy: General Discussion
- Topic: capacitive soil moisture sensor v1.2 again
- Replies: 24
- Views: 12471
Re: capacitive soil moisture sensor v1.2 again
With the interval set to 60sec, I'll receive the following data from this sensor in the soil with no watering for approx. a day:
- 10 Dec 2022, 14:34
- Forum: ESP Easy: General Discussion
- Topic: capacitive soil moisture sensor v1.2 again
- Replies: 24
- Views: 12471
Re: capacitive soil moisture sensor v1.2 again
The DFR FireBeetle really has a pin named A0 / IO36 (top left)
I had set 500 to represent for 0% and 1 for 100% - now it's deactivated.
When switching to ADC 1 / ch0 I'm receiving 136,5mV with all pins connected to the ESP.I had set 500 to represent for 0% and 1 for 100% - now it's deactivated.
- 10 Dec 2022, 11:18
- Forum: ESP Easy: General Discussion
- Topic: capacitive soil moisture sensor v1.2 again
- Replies: 24
- Views: 12471
Re: capacitive soil moisture sensor v1.2 again
has one meanwhile been able to successfully use this kind of sensor and could share the howto/settings? I'm trying it with a DFRobot FireBeetle, sensor connected to 3V3, GND and A0. Device: Analog input - internal Analog Pin: Hall Effect Att: 11dB Oversampling: Use Current Sample When switching to A...
- 26 Nov 2022, 14:40
- Forum: ESP Easy: Hardware
- Topic: GPIO's for SonOff THR320D
- Replies: 63
- Views: 20686
Re: GPIO's for SonOff THR320D
allowing the display to work would be an additional great value.
If I somehow can help, please let me know.
If I somehow can help, please let me know.
- 26 Nov 2022, 13:19
- Forum: ESP Easy: Hardware
- Topic: GPIO's for SonOff THR320D
- Replies: 63
- Views: 20686
Re: GPIO's for SonOff THR320D
I can inform that the first SonOff THR320D is now running since almost 10 days without any problems. That one is meanwhile accompanied by a second one, I decided to go for the same one as I expected synergies and easier maintenance (although a cheaper would have been sufficient). This second device ...
- 16 Nov 2022, 19:54
- Forum: ESP Easy: Hardware
- Topic: GPIO's for SonOff THR320D
- Replies: 63
- Views: 20686
Re: GPIO's for SonOff THR320D
Short update: the device is configured and started serving hot water. I'm a bit puzzled, if now everything's working and also whether the device is reliable now .. as the sensors e.a. are. Current version running: mega-20221105 LittleFS-factory.bin I've read about some timing peculiarities together ...
- 15 Nov 2022, 20:13
- Forum: ESP Easy: Hardware
- Topic: GPIO's for SonOff THR320D
- Replies: 63
- Views: 20686
Re: GPIO's for SonOff THR320D
and in the middle of the action, updating Rules or checking something in the Device's tab .. it's gone, what? No idea, device, WiFi, .. and it will not reboot. sometime the ESP Easy hotspot shows up again but not reliable, not at all. Haven't thought it's going to be that difficult with this device ...
- 15 Nov 2022, 17:59
- Forum: ESP Easy: Hardware
- Topic: GPIO's for SonOff THR320D
- Replies: 63
- Views: 20686
Re: GPIO's for SonOff THR320D
I've re-done everything again meanwhile .. two or three times .. looks like there's still some miracle in when the AP mode to disappear. Also followed the rule to stick to the newest version: mega-20221105 Hopefully followed all good advice from the posts before. againOkay.jpg I'm not sure what happ...
- 15 Nov 2022, 10:07
- Forum: ESP Easy: Hardware
- Topic: GPIO's for SonOff THR320D
- Replies: 63
- Views: 20686
Re: GPIO's for SonOff THR320D
if power cycle means taking the device off the mains and re-connect it: that has been done multiple times, even with minutes while off the mains. The device always reconnected as AP last night.
- 14 Nov 2022, 22:27
- Forum: ESP Easy: Hardware
- Topic: GPIO's for SonOff THR320D
- Replies: 63
- Views: 20686
Re: GPIO's for SonOff THR320D
Yes, ESP Easy Hotspot and setting up credentials for normal WiFi worked fine again.
I put my mobile to flight mode, restarted the Sonoff but no connection possible. Some half hour later I checked with my mobile and the ESP hotspot was still available and the device willing to connect in AP mode
I put my mobile to flight mode, restarted the Sonoff but no connection possible. Some half hour later I checked with my mobile and the ESP hotspot was still available and the device willing to connect in AP mode
- 14 Nov 2022, 19:47
- Forum: ESP Easy: Hardware
- Topic: GPIO's for SonOff THR320D
- Replies: 63
- Views: 20686
Re: GPIO's for SonOff THR320D
I erased and flashed the device again with HEAD_1f690ef version (20221104) ..
Warning: Connected via AP ..
Groundhog day?
Warning: Connected via AP ..
Groundhog day?
- 14 Nov 2022, 18:10
- Forum: ESP Easy: Hardware
- Topic: GPIO's for SonOff THR320D
- Replies: 63
- Views: 20686
Re: GPIO's for SonOff THR320D
I meanwhile rasped my own RJ9 jack, not super good but should do. left and right pins are 3V3 and GND or the other way round, depending on how you look at it. The multimeter gives a correct display of 3.341V. If I connect data and GND or data and 3V3 nothing changes, output in the device's tab remai...
- 14 Nov 2022, 17:59
- Forum: ESP Easy: Hardware
- Topic: GPIO's for SonOff THR320D
- Replies: 63
- Views: 20686
Re: GPIO's for SonOff THR320D
loosing track, I have to admit ..
(super silly, I know ..)
(super silly, I know ..)
- 14 Nov 2022, 17:06
- Forum: ESP Easy: Hardware
- Topic: GPIO's for SonOff THR320D
- Replies: 63
- Views: 20686
Re: GPIO's for SonOff THR320D
internal pull-up resistor activated for GPIO27 .. as the Dallas one seem to not own one on its device's tab. taskdis/enable: 456730: EVENT: Clock#Time=Mon,17:04 456878: ACT : taskdisable,27 456883: ACT : TaskEnable,27 457318: EVENT: TaskExit#ttt=27,0 457329: EVENT: TaskInit#ttt=27,0 475373: static_f...
- 13 Nov 2022, 22:26
- Forum: ESP Easy: Hardware
- Topic: GPIO's for SonOff THR320D
- Replies: 63
- Views: 20686
Re: GPIO's for SonOff THR320D
Saw the manual for the resistor, thx, but somehow didn't dare to cut the only one I have at the moment - maybe also as I expected the device to have one integrated and me doing something stupid. How could I re-init the Dallas task? Disabling/enabling resp. rebooting with GPIO27 set to 1 on boot didn...
- 13 Nov 2022, 19:14
- Forum: ESP Easy: Hardware
- Topic: GPIO's for SonOff THR320D
- Replies: 63
- Views: 20686
Re: GPIO's for SonOff THR320D
no idea anymore, posting a screen of when it used to work, maybe that'll help later
- 13 Nov 2022, 17:34
- Forum: ESP Easy: Hardware
- Topic: GPIO's for SonOff THR320D
- Replies: 63
- Views: 20686
Re: GPIO's for SonOff THR320D
there seems to be something more .. as the temperature sensor has gone again. GPIO's so far: GPIO,19,1 + GPIO,22,0 -> 'big' relay OFF (seems to be inverted) 19,0+22,1 gives the noisy 'clack' + AC on L Out) GPIO,4,1 'small' relay ON GPIO,13,1 // right LED green OFF GPIO,15,1 // mid LED blue OFF GPIO,...
- 13 Nov 2022, 16:08
- Forum: ESP Easy: Hardware
- Topic: GPIO's for SonOff THR320D
- Replies: 63
- Views: 20686
Re: GPIO's for SonOff THR320D
Now comes the software part:
if I, e.g., would like to check the sensor's temperature every 5seconds, would you say I leave the 3V3 ON all time or should I switch it ON/off for every reading?
How would you implement detecting a rising temperature ..
if I, e.g., would like to check the sensor's temperature every 5seconds, would you say I leave the 3V3 ON all time or should I switch it ON/off for every reading?
How would you implement detecting a rising temperature ..
- 13 Nov 2022, 15:40
- Forum: ESP Easy: Hardware
- Topic: GPIO's for SonOff THR320D
- Replies: 63
- Views: 20686
Re: GPIO's for SonOff THR320D
confirmed: /control?cmd=gpio,27,1 gives a temperature reading
Your soft is awesome
Your soft is awesome
- 13 Nov 2022, 15:31
- Forum: ESP Easy: Hardware
- Topic: GPIO's for SonOff THR320D
- Replies: 63
- Views: 20686
Re: GPIO's for SonOff THR320D
might be GPIO27 as due to https://templates.blakadder.com/sonoff_THR320D.html
GPIO27 Output Hi
GPIO27 Output Hi
- 13 Nov 2022, 15:09
- Forum: ESP Easy: Hardware
- Topic: GPIO's for SonOff THR320D
- Replies: 63
- Views: 20686
Re: GPIO's for SonOff THR320D
If I connected the PIN's properly (no RJ45 jack available at the moment) non of the GPIO's 1 .. 25 change it's state when data is connected to GND or 3V3.
But honestly I can't even get a reading of 3V3 when attaching the multimeter.
But honestly I can't even get a reading of 3V3 when attaching the multimeter.
- 05 Nov 2022, 20:17
- Forum: ESP Easy: Hardware
- Topic: GPIO's for SonOff THR320D
- Replies: 63
- Views: 20686
Re: GPIO's for SonOff THR320D
Good question but how could I know
- 05 Nov 2022, 18:48
- Forum: ESP Easy: Hardware
- Topic: GPIO's for SonOff THR320D
- Replies: 63
- Views: 20686
Re: GPIO's for SonOff THR320D
It works, thx!
Tried to access the DS18B20 temperature sensor on GPIO25 quickly, but received 0.00 readings.
Have to take a closer look I guess.
Tried to access the DS18B20 temperature sensor on GPIO25 quickly, but received 0.00 readings.
Have to take a closer look I guess.
- 04 Nov 2022, 22:42
- Forum: ESP Easy: Hardware
- Topic: GPIO's for SonOff THR320D
- Replies: 63
- Views: 20686
Re: GPIO's for SonOff THR320D
those three:
ESP_Easy_mega_20221030_normal_ESP32_4M316k.factory.bin
ESP_Easy_mega_20221030_normal_ESP32_4M316k_ETH.factory.bin
ESP_Easy_mega_20221030_normal_ESP32_4M316k_LittleFS.factory.bin
Flash Tool:
flash_download_tool_3.9.3
E.g.
ESP_Easy_mega_20221030_normal_ESP32_4M316k.factory.bin
ESP_Easy_mega_20221030_normal_ESP32_4M316k_ETH.factory.bin
ESP_Easy_mega_20221030_normal_ESP32_4M316k_LittleFS.factory.bin
Flash Tool:
flash_download_tool_3.9.3
E.g.