Looks like it's not even booting correctly when forcing DOUT but I need to doublecheck wiring is still okay.

I apologize for the German pages but I'm sure the important points are understandable:
https://www.heise.de/make/meldung/Schne ... 06572.html

some three years ago:
https://www.heise.de/make/meldung/Espre ... 62160.html
short version: ESP8285 integrated the 8MBit flash chip?

Can you test with this "normal" build? https://www.dropbox.com/s/jhcjs2m7gw6huze/normal_ESP8266_1M_new_puya.bin?dl=0 Unfortunately: SaveToFile: config.dat ERROR, Cannot save to file Flash chip: which one could it be? there's one with 8 legs, one with 7, one that looks like the clock and t...

doubt it meanwhile: Tasmota as well as ESPurna don't seem to

not sure if I can code it by myself: I have an ESP-32 using SPIFFS for storing and codings for some ESP-01's - but both projects are completely separated at the moment.

I have some black ESP-01's - but flashed with kind of self-developed firmware, not EspEasy

The Albohes from here runs correctly with 'other' IOT software and keeps settings also after re-powering, so hardware seems to be okay.

Can you test a build from start of december 2018, one with "puya" in the build name? btw: is there a way of searching in github for stuff like that - automatically? ESP_Easy_mega-20181107_dev_ESP8266PUYA_1024.bin flashed (the latest I found with 'PUYA' in the bin name). 1st change: Wifi s...

I can try some of the older ones, sure. Could you please give me a hint on which firmware versions in one release I should focus? There are three (?) containing a '8285' in their names and I've got no idea what the differences could be. Should I flash the blank firmware before every try? If there's ...

hi, Can one please help which firmware should be used to flash this device? I tested all three firmwares *8285* as well as a 1M for 8266 of the Release mega-20190903. Flashing always was successful as was connecting to setup page (192.168.4.1). I could setup router details and connect to it. When ch...

just some outdoor controls that should work although BME reports humidity of 100% and/or freezing temperatures

Are there any devices you know of which are suited more for an outdoor usage than the ones known for indoor? I know, a power plug isn't really made for rain but this one would be located under a roof. Something like this, also because it offers two channels, would be really great - without the unwan...

How often a channel changes is highly depending on the number of access points in the neighborhood. Unfortunately I had also massive re-connect issues with one of my PI's, too. Just a few AP's round and I could see my Android tab loosing and regaining connection automatically where my PI had to be ...

Nothing which is set dynamically will survive a boot. I'd like to re-activate this question: for quite a few of my ESP's I programmed myself, I had the necessity to store values that would survive even long periods of no power. Either because I do not want to enable WiFi or simply because I can't. ...

ThomasB wrote: ↑11 Aug 2019, 18:34

Changing a dummy var's value does not use a event command. It uses the taskvalueset command.

Thank you very much, I was so focussed on the 'event' that I didn't see how straight forward the solution could be.

at Germany diy chain 'Obi' an ESP based WiFi socket is sold https://www.obi.de/hausfunksteuerung/wifi-stecker-schuko-weiss/p/4077806?wt_mc=gs.pla.Technik.SicherheitHaustechnik.Hausfunksteuerung&wt_cc1=661774050&wt_cc4=c&wt_cc9=39055121008&gclid=Cj0KCQjw-b7qBRDPARIsADVbUbWSyyOLv-WBUBr...

sorry guys, but I don't understand what you're talking of. I'll try and put it in other words so maybe you understand me: I simply want to set/alter a variable using an http command like this one http://<ip>/control?cmd=event,<eventName>=<eventValue> Thought the way to get it done was: 1. create a '...

Sorry but I can't set the rules you're using. Please attach them in a "code" syntax. A bit lengthy hence I thought a zip could be better. As requested: on System#Boot do gpio,4,0 // sicherheitshalber TaskValueSet 2,1,2 // 2 = Task# in "Devices" // 1 = erste Variable=Anzahl // 2...

Dear ESPEasy professional, being a newbie to this great software, I have a problem which I thought I had solved, but it's back: when sending http requests I can easily activate the relais of my ESP using a browser, e.g. http://<ip>/control?cmd=gpio,4,1 But when trying to alter a value it doesn't wor...