Search found 77 matches

by Dondolo
19 Dec 2021, 04:06
Forum: ESP Easy: Software
Topic: External Time Source -DS3231 need help
Replies: 67
Views: 14255

Re: External Time Source -DS3231 need help

So everything is transmitted correctly and the receiver ESP can process it. Only the time is still an hour higher, maybe winter time or summer time? SendToHTTP 192.168.178.107,80,"/control?cmd=event,ClockDate=%sysyear_0%-%sysmonth_0%-%sysday_0%,%syshour_0%:%sysmin_0%:%syssec_0%" send.JPG r...
by Dondolo
19 Dec 2021, 03:20
Forum: ESP Easy: Software
Topic: External Time Source -DS3231 need help
Replies: 67
Views: 14255

Re: External Time Source -DS3231 need help

You might want to use the date and time separate: CODE: Select all SendToHTTP 192.xxx,80,"/control?cmd=event,Uhrzeit=%systime%" SendToHTTP 192.xxx,80,"/control?cmd=event,Datum=%unixtime%" SendToHTTP 192.xxx,80,"/control?cmd=event,DatumUhrzeit=%sysyear_0%-%sysmonth_0%-%sysda...
by Dondolo
18 Dec 2021, 17:42
Forum: ESP Easy: Software
Topic: External Time Source -DS3231 need help
Replies: 67
Views: 14255

Re: External Time Source -DS3231 need help

CODE: Select all SendToHTTP 192.168xxxx,80,"/control?cmd='event,DatumUhrzeit=%lcltime%,%systime%'" Wrapped the event command in different quotes (single quote) Unfortunately, wrapping doesn't work. ESP that sends SendToHTTP 192.xxx,80,"/control?cmd=event,Uhrzeit=%systime%" SendT...
by Dondolo
18 Dec 2021, 12:51
Forum: ESP Easy: Software
Topic: External Time Source -DS3231 need help
Replies: 67
Views: 14255

Re: External Time Source -DS3231 need help

Hi Td-er, everything back it works, I idiot inserted the battery incorrectly; - ((sorry Now I wanted to update the time on other ESPs via the http command. Why does this command work, time and date are transferred. SendToHTTP 192.1xxx,80,"/control?cmd=event,UhrzeitDatum=%systime%,%lcltime%"...
by Dondolo
18 Dec 2021, 12:08
Forum: ESP Easy: Software
Topic: External Time Source -DS3231 need help
Replies: 67
Views: 14255

Re: External Time Source -DS3231 need help

Hi Td-er, The command you gave was using a dot instead of a comma (and spaces) See: https://espeasy.readthedocs.io/en/lates ... l-commands that was a copy and past mistake. Datetime,2021-12-18,11:26:00 But it doesn't even work correctly spelled. After booting, 1970-01-01 is displayed again. With or ...
by Dondolo
18 Dec 2021, 10:59
Forum: ESP Easy: Software
Topic: External Time Source -DS3231 need help
Replies: 67
Views: 14255

Re: External Time Source -DS3231 need help

by Ath » 18 Dec 2021, 09:47 That time source is available in the ESPEasy core, documentation is here: https://espeasy.readthedocs.io/en/lates ... l#advanced I saw the documentation too, but it didn't really help me. I had to change the battery in the DS3231 chip and the following time is displayed ...
by Dondolo
18 Dec 2021, 08:42
Forum: ESP Easy: Software
Topic: External Time Source -DS3231 need help
Replies: 67
Views: 14255

External Time Source -DS3231 need help

Hi, due to construction work we no longer have internet. The idea is to make the time available with the IC2 DS3231. I just have no idea how to set the system time with the DS3231. ds3231.JPG ds3231IC2.JPG Of course, you can do this via command: datetime, 2021-12-17.21: 13: 00 Is there a plugin e.g....
by Dondolo
21 Nov 2021, 18:18
Forum: ESP Easy: Software
Topic: Measure current ACS712 and ADS1115 are not working properly
Replies: 10
Views: 6363

Re: Measure current ACS712 and ADS1115 are not working properly

One example to perform filtering in rules: https://espeasy.readthedocs.io/en/lates ... ng-filters Hi TD-er, I tried to calculate the mean of [VAR # 3] over 10 values. But how, I tried it via an event, e.g. like this: on ADS1115A1#DiffA0A1ASC712 do TaskRun,1 let,1,[ADS1115A0#SpannungsteilerA0] let,2...
by Dondolo
21 Nov 2021, 10:49
Forum: ESP Easy: Software
Topic: Measure current ACS712 and ADS1115 are not working properly
Replies: 10
Views: 6363

Re: Measure current ACS712 and ADS1115 are not working properly

Not sure how often voltage or current changes on your setup. If it doesn't, then you don't need to tweak it, but if it does, you may want to make sure both tasks are executed as fast as possible after each other. You could set a loop timer and call taskrun when handling the loop timer and then keep...
by Dondolo
20 Nov 2021, 23:43
Forum: ESP Easy: Software
Topic: Measure current ACS712 and ADS1115 are not working properly
Replies: 10
Views: 6363

Re: Measure current ACS712 and ADS1115 are not working properly

Hi TD-er, I have rewritten the rules and worked, thanks for the feedback. Can you also help me how I calculate the current now? A voltage divider for half the reference voltage (2.5 V) was installed on the A1. What does the formula look like in the form field? on ADS1115A0#A0 do TaskValueSet,8,1,[AD...
by Dondolo
20 Nov 2021, 21:22
Forum: ESP Easy: Software
Topic: Measure current ACS712 and ADS1115 are not working properly
Replies: 10
Views: 6363

Re: Measure current ACS712 and ADS1115 are not working properly

Hello Ath, thanks for the quick reply. The first part has already helped, thanks! Now looks like this: And do you have different I2C addresses set for each task? That's also kind of required for the ADS1115 to work correctly, as when the all try to address the same module at nearly the same time, it...
by Dondolo
20 Nov 2021, 20:15
Forum: ESP Easy: Software
Topic: Measure current ACS712 and ADS1115 are not working properly
Replies: 10
Views: 6363

Measure current ACS712 and ADS1115 are not working properly

Hi there, I would like to use the ADS1115 to record the analog signal of the ACS712 current sensor a little more precisely. With the rules I cannot offset the A0 port with the A1 port. Only one value is ever assigned to a variable. The offsetting by the ADS115 A1-A0 works, but I cannot calculate an ...
by Dondolo
02 Oct 2021, 14:23
Forum: ESP Easy: Software
Topic: Serial MCU controlled relay/switch
Replies: 459
Views: 961477

Re: Serial MCU controlled relay/switch

Sorry had missed your post, or at least not placed it on my mental todo list. Here you are: Unfortunately I cannot switch the relay. I use the following relay https://cdn.shopify.com/s/files/1/1509/1638/files/ESP8266-01S_Mit_Relais_Datenblatt_AZ-Delivery_Vertriebs_GmbH_a59bc26c-41d5-4e0f-a849-c9043...
by Dondolo
30 Sep 2021, 22:23
Forum: ESP Easy: Software
Topic: Serial MCU controlled relay/switch
Replies: 459
Views: 961477

Re: Serial MCU controlled relay/switch

Sorry had missed your post, or at least not placed it on my mental todo list.
Here you are:
Hi
thank you very much.
I flashed it right away and it works wonderfully.
I will test tomorrow.
Thank you Dondolo
by Dondolo
30 Sep 2021, 20:45
Forum: ESP Easy: Software
Topic: Serial MCU controlled relay/switch
Replies: 459
Views: 961477

Re: Serial MCU controlled relay/switch

Currently there is no pre-build file for 1M using that plugin.
So we have to make a custom build for it.

What else do you need in that build?
Hi Td-ler,
do you find the time to create a customer version for the ESP01?

Greetings Dondolo
by Dondolo
29 Sep 2021, 19:09
Forum: ESP Easy: Software
Topic: Plugin Start aus Rules
Replies: 1
Views: 3793

Plugin Start aus Rules

Hi,

is it possible the plugin
P042_Candle.ino
out of rules to start and end?

The candle plug-in should start at sunrise and go out at a certain time.
Greetings Dondolo
by Dondolo
28 Sep 2021, 17:02
Forum: ESP Easy: Software
Topic: Serial MCU controlled relay/switch
Replies: 459
Views: 961477

Re: Serial MCU controlled relay/switch

The build you flashed is for 4M flash, so not really strange to see it won't boot. Currently there is no pre-build file for 1M using that plugin. So we have to make a custom build for it. What else do you need in that build? yes that's right, are just 1MB. It would be nice if the custom build the s...
by Dondolo
28 Sep 2021, 09:17
Forum: ESP Easy: Software
Topic: Serial MCU controlled relay/switch
Replies: 459
Views: 961477

Re: Serial MCU controlled relay/switch

The latest builds can be found here: https://github.com/letscontrolit/ESPEasy/releases But be aware that 1M builds may be hard to update via WiFi as it simply won't fit. So you might want to flash them using serial. Hi TD-er, is it even possible to install the Serial MCU on an ESP01 1M? Have tried ...
by Dondolo
08 Aug 2021, 09:10
Forum: ESP Easy: Software
Topic: ESP32 can no longer be reached after saving the rules
Replies: 5
Views: 4996

Re: ESP32 can no longer be reached after saving the rules

TD-er wrote: 08 Aug 2021, 00:11 Can you test if it also hangs when you have the password cleared?
Hello TD-er,

I could no longer reach the ESP32 at all and flashed it again. Currently he only runs one set of rules for himself. Lets see how it goes on.
Greetings Dondolo
by Dondolo
07 Aug 2021, 20:35
Forum: ESP Easy: Software
Topic: Thinkspeak does not receive all of the data
Replies: 8
Views: 5306

Re: Thinkspeak does not receive all of the data

And an idea about the actual problem?
by Dondolo
07 Aug 2021, 20:33
Forum: ESP Easy: Software
Topic: Thinkspeak does not receive all of the data
Replies: 8
Views: 5306

Re: Thinkspeak does not receive all of the data

a little smarter again, thank you.
by Dondolo
07 Aug 2021, 20:14
Forum: ESP Easy: Software
Topic: Thinkspeak does not receive all of the data
Replies: 8
Views: 5306

Re: Thinkspeak does not receive all of the data

You might want to take that key out of your post.
With, typed too fast. Yes, but how?
by Dondolo
07 Aug 2021, 17:59
Forum: ESP Easy: Software
Topic: ESP32 can no longer be reached after saving the rules
Replies: 5
Views: 4996

Re: ESP32 can no longer be reached after saving the rules

Is your ESP32 password protected?
yes, admin and password
by Dondolo
07 Aug 2021, 17:57
Forum: ESP Easy: Software
Topic: Thinkspeak does not receive all of the data
Replies: 8
Views: 5306

Re: Thinkspeak does not receive all of the data

Code: Select all

What Controllers are configured at slots 1 and 2?
I'm not quite sure is that what you mean?



Is this command correctly written?

Code: Select all

SendToHTTP,api.thingspeak.com,80,/update?api_key=xxxxxxxxx&field3=[BH1750#Lux]
by Dondolo
07 Aug 2021, 17:13
Forum: ESP Easy: Software
Topic: ESP32 can no longer be reached after saving the rules
Replies: 5
Views: 4996

ESP32 can no longer be reached after saving the rules

Hi,
I have problems with the ESP32 and rules.
When I make entries in the rules field and want to save them, the ESP32 hangs up and can no longer be reached.

Just updated to mega 20210802
ESP_Easy_mega_20210802_test_B_ESP32_4M316k.bin

Does anyone have a solution?

Greetings Dondolo
by Dondolo
07 Aug 2021, 17:07
Forum: ESP Easy: Software
Topic: Thinkspeak does not receive all of the data
Replies: 8
Views: 5306

Thinkspeak does not receive all of the data

Hi, I have problems with Thinkspeak, the data is only partially arriving Just updated to mega 20210802 ESP_Easy_mega_20210802_test_B_ESP32_4M316k.bin I configured the Thinkspeak Controller as follows: Task 1, 4, 60 controller no.3 should be transferred However, only data from controller no. 1 and 4 ...
by Dondolo
10 May 2021, 18:49
Forum: ESP Easy: Software
Topic: Display commands TFT on the ESP8266
Replies: 2
Views: 3793

Re: Display commands TFT on the ESP8266

Hi ATH,
thank you that was exactly what I was missing.
This somewhat useless example repeats the same action every minute, but maybe it gets you in the desired direction?

Clearly an event is needed was only to test the commands.

Thank you Dondolo
by Dondolo
09 May 2021, 20:12
Forum: ESP Easy: Software
Topic: Display commands TFT on the ESP8266
Replies: 2
Views: 3793

Display commands TFT on the ESP8266

Hi, I have installed this version "ESP_Easy_mega_20210503_display_ESP8266_4M1M". I can control the TFT display via http with all commands from rules from another ESP. e.g. SendToHTTP 192.168.178.38,80,"/control?cmd=tftcmd,clear" SendToHTTP 192.168.178.38,80,"/control?cmd=tft...
by Dondolo
02 Apr 2021, 20:50
Forum: ESP Easy: Hardware
Topic: Water alarm with ESP01, deep sleep and message via mqtt
Replies: 2
Views: 7606

Water alarm with ESP01, deep sleep and message via mqtt

Hi, I would like to build a water alarm sensor with the ESP01 (battery 3AAA). I modified the ESP01 so that it goes into deep sleep. When water should be detected the ESP01 wake up and report. The ESP01 should wake up at regular intervals and send its status including the battery voltage via mqtt. In...
by Dondolo
28 Mar 2021, 16:20
Forum: ESP Easy: Software
Topic: Trigger Mointor GPIO event (was resolved quickly)
Replies: 9
Views: 6025

Re: Trigger Mointor GPIO event (was resolved quickly)

Are you interested in the state at boot, or when you publish it on MQTT#connected ? The background is, I use Iobroker with the Jarves View. There I switch a relay on the ESP (espeasy) with blockly script. When switching, the command goes e.g. http: //192.168.xxx.xx/control? cmd = gpio, 15.1 Out. -L...
by Dondolo
28 Mar 2021, 14:46
Forum: ESP Easy: Software
Topic: Trigger Mointor GPIO event (was resolved quickly)
Replies: 9
Views: 6025

Re: Trigger Mointor GPIO event (was resolved quickly)

I'm sorry, have to ask again. What does the rule have to look like so that the GPIo status is published? This is not how it works: on System#Boot do Monitor,GPIO,14 timerSet,1,10 let,1,[Plugin#GPIO#Pinstate#14] endon on MQTT#Connected do Publish,Test/GPIO14,[var#1] TaskValueSet 12,1,[var#1] endon on...
by Dondolo
28 Mar 2021, 13:19
Forum: ESP Easy: Software
Topic: Trigger Mointor GPIO event (was resolved quickly)
Replies: 9
Views: 6025

Re: Trigger Mointor GPIO event (was resolved quickly)

Also using %eventvalue1% in your rules may make things a lot simpler:
I still have a question when the ESP reboots, how can I query the GPIO status and send it to the broker with publish?
by Dondolo
28 Mar 2021, 13:07
Forum: ESP Easy: Software
Topic: ESP8266 NodMCU starts new ones if DS18b20 are connected
Replies: 9
Views: 5570

Re: ESP8266 NodMCU starts new ones if DS18b20 are connected

You're using a step-down converter with what looks like a LM2596 or something similar. Can you try the setup with only the Dallas units connected on a different power supply? For example start with powering it via USB or some lab power supply, or move the switching power supply away from the long w...
by Dondolo
28 Mar 2021, 07:49
Forum: ESP Easy: Software
Topic: ESP8266 NodMCU starts new ones if DS18b20 are connected
Replies: 9
Views: 5570

Re: ESP8266 NodMCU starts new ones if DS18b20 are connected

Thanks TD-er, I was totally blind, have now uploaded the picture. You have to attach an image via the "attachments" tab below the reply text field of this forum. Your image was located on your C-drive, not hosted online. By attaching it to a forum post, you place it also on the server wher...
by Dondolo
27 Mar 2021, 23:53
Forum: ESP Easy: Software
Topic: ESP8266 NodMCU starts new ones if DS18b20 are connected
Replies: 9
Views: 5570

Re: ESP8266 NodMCU starts new ones if DS18b20 are connected

Hello Td-er, I have three relays on GPIO 15,13,12 and 2 DS18b20 each with a 4.7kOhm resistor on GPIO 14 and 2 respectively. Unfortunately, I don't get the picture displayed, on which it was quite easy to see. What is wrong with the url (see above)? What do I have to do so that the picture is uploaded?
by Dondolo
27 Mar 2021, 18:52
Forum: ESP Easy: Software
Topic: ESP8266 NodMCU starts new ones if DS18b20 are connected
Replies: 9
Views: 5570

Re: ESP8266 NodMCU starts new ones if DS18b20 are connected

Heck, I can't get the picture uploaded.
by Dondolo
27 Mar 2021, 18:50
Forum: ESP Easy: Software
Topic: ESP8266 NodMCU starts new ones if DS18b20 are connected
Replies: 9
Views: 5570

ESP8266 NodMCU starts new ones if DS18b20 are connected

Hi, the ESP8266 NodMcu reboots after a minute when I connect the DS18B20 sensors. To clarify, I have shown the layout with FRITZING. At first I did without rules. Does anyone have any idea why the ESP keeps restarting? Firmware Build:⋄ 20112 - Mega System Libraries:⋄ ESP82xx Core 2843a5ac, NONOS SDK...
by Dondolo
21 Mar 2021, 17:12
Forum: ESP Easy: Software
Topic: Trigger Mointor GPIO event (was resolved quickly)
Replies: 9
Views: 6025

Re: Trigger Mointor GPIO event (was resolved quickly)

Thank you for the quick solution!
by Dondolo
21 Mar 2021, 14:18
Forum: ESP Easy: Software
Topic: Trigger Mointor GPIO event (was resolved quickly)
Replies: 9
Views: 6025

Trigger Mointor GPIO event (was resolved quickly)

Hi, I switch a GPIO with http: //192....=gpio,15,1. I want to monitor the GPIO using the Monitor, GPIO, 15 command. How can I trigger an event when the value changes? I tried the following rule: on System#Boot do Monitor,GPIO,15 endon on plugin#gpio#pinstate#15 do Publish,%sysname%/GPIO/Lüfter,[plug...
by Dondolo
23 Jan 2021, 16:31
Forum: ESP Easy: Hardware
Topic: MLX90614 with ESp8266 and EspEasy 1037.55
Replies: 11
Views: 10264

Re: MLX90614 with ESp8266 and EspEasy 1037.55

Maybe also check with a build of roughly a year ago. A while ago (not sure about the timeline...) the code for I2C was changed in the esp8266/Arduino core. This lead to a number of sensors showing issues. Most of those issues were resolved by lowering the I2C clock for them, but that's something yo...
by Dondolo
23 Jan 2021, 16:27
Forum: ESP Easy: Hardware
Topic: MLX90614 with ESp8266 and EspEasy 1037.55
Replies: 11
Views: 10264

Re: MLX90614 with ESp8266 and EspEasy 1037.55

Please check your wires, I've seen so many of those cheap breakout-board wires having no, or bad, connections inside, I test 'm all individually using a multimeter (and wiggling the wire a bit) before ever using them, to avoid any dissappointment. Hi Ath, checked all cables and used them without a ...
by Dondolo
23 Jan 2021, 09:27
Forum: ESP Easy: Hardware
Topic: MLX90614 with ESp8266 and EspEasy 1037.55
Replies: 11
Views: 10264

Re: MLX90614 with ESp8266 and EspEasy 1037.55

Hi, yes i use standard pin D4 / D5 for IC2. The sensor is installed on a breakboard with 2 x10kOhm resistors, Actually, it doesn't need any additional resistance. The LCD works fine, the IC2 connection works. I assume that it is defective or processed improperly. Let's see if I can exchange the sens...
by Dondolo
22 Jan 2021, 19:34
Forum: ESP Easy: Hardware
Topic: MLX90614 with ESp8266 and EspEasy 1037.55
Replies: 11
Views: 10264

Re: MLX90614 with ESp8266 and EspEasy 1037.55

Hi TD-er, Thanks for the feedback. Do you mean that the sensor is defective? First I tried the internal resistors, then with 10kOhm, 3.3kOhm and with 50kOhm everything was unsuccessful. With an LCD and an ADS115 on the IC2 bus, I occasionally get values. The cable is approx. 20 cm long. The address ...
by Dondolo
21 Jan 2021, 19:23
Forum: ESP Easy: Hardware
Topic: MLX90614 with ESp8266 and EspEasy 1037.55
Replies: 11
Views: 10264

MLX90614 with ESp8266 and EspEasy 1037.55

MLX90614 with ESp8266 and EspEasy 1037.55 Hi there, the MLX90614 IC2 infrared sensor only shows 1037.55. unfortunately I only get the value 1037.55 regardless of whether the object or ambient temperature is displayed under ESP_Easy_mega_20201022_normal_ESP8266_4M1M. Initially, and only as a flash, a...
by Dondolo
05 Jan 2021, 22:20
Forum: ESP Easy: Software
Topic: Servo control slow gradually
Replies: 10
Views: 7448

Re: Servo control slow gradually

You could create a loop in the rules and use a variable to keep track of the current state of the servo. on openevent do let,2,30 // var#1 = cur position, var#2 = target position let,3,([var#2]-[var#1])/10 // Step size loopTimerSet_ms,1,500,10 // 10 loop steps of 500 msec each endon on Rules#Timer=...
by Dondolo
05 Jan 2021, 18:28
Forum: ESP Easy: Software
Topic: Servo control slow gradually
Replies: 10
Views: 7448

Re: Servo control slow gradually

Hi TD-er,
thank you, I have to understand that first and try it out. Then give feedback.
Thank you very much for now.
by Dondolo
05 Jan 2021, 12:55
Forum: ESP Easy: Software
Topic: Servo control slow gradually
Replies: 10
Views: 7448

Re: Servo control slow gradually

Ok, the box lid opens and closes every 30 seconds, just too fast; - ((
Is there any other method?
Which syntax error?
by Dondolo
05 Jan 2021, 12:37
Forum: ESP Easy: Software
Topic: Servo control slow gradually
Replies: 10
Views: 7448

Re: Servo control slow gradually

Thanks for the feedback!
The periods are arbitrary, I am currently testing the servo function.
Exactly a loop with small steps would be just the thing.

I don't know the speed function, the function could help.

The goal is really just to slowly open the lid and close it accordingly.
by Dondolo
05 Jan 2021, 11:46
Forum: ESP Easy: Software
Topic: Servo control slow gradually
Replies: 10
Views: 7448

Servo control slow gradually

Hi, I would like to open a box with a servo per rules. In the first step I was able to solve it like this: on Rules # Timer = 1 do Servo, 0,12,120 timerSet, 2.30 endon on Rules # Timer = 2 do Servo, 0.12.30 timerSet, 1.30 endon The problem is that the lid flies open and closes again after the time h...
by Dondolo
26 Nov 2020, 08:36
Forum: ESP Easy: Software
Topic: Error message plugin 119 BME680 -SENSOR_TYPE_QUAD' was not declared in this scope
Replies: 13
Views: 9023

Re: Error message plugin 119 BME680 -SENSOR_TYPE_QUAD' was not declared in this scope

I made a complete test build for the PR: https://www.dropbox.com/s/ho9s2khkqnx21bz/ESPEasy_ESP32_mega-20201102-115-PR_3386.zip?dl=0 https://www.dropbox.com/s/5wounjmf8z58xkp/ESPEasy_ESP82xx_mega-20201102-115-PR_3386.zip?dl=0 ... Kannst Du vielleicht eine Datei (ESP_Easy_mega_20201124_normal_ESP8266...