Search found 3540 matches
- 02 May 2024, 21:25
- Forum: ESP Easy: Hardware
- Topic: Switch to other ESP what do you Prefer?
- Replies: 2
- Views: 47
Re: Switch to other ESP what do you Prefer?
As usual in IT, "It depends" :lol: - ESP8266: Skip that, as it's (IMHO) outdated, and really limited, in both RAM and max. bin size (The amount of work to make ESPEasy fit is increasing with every useful feature we try to add) - ESP32 (Classic): Fine for most tasks, great if you need Ether...
- 01 May 2024, 23:26
- Forum: ESP Easy: Software
- Topic: Add new sensor (Adafruit STEMMA Soil Sensor - I2C)
- Replies: 7
- Views: 2108
Re: Add new sensor (Adafruit STEMMA Soil Sensor - I2C)
@knighToFdemonS The PR has been merged, and will be in the next ESPEasy release.
- 01 May 2024, 23:25
- Forum: ESP Easy: General Discussion
- Topic: Plugin 64, APDS 9960, which "Collection"?
- Replies: 17
- Views: 2416
Re: Plugin 64, APDS 9960, which "Collection"?
@oisisi The PR has been merged, and will be in the next ESPEasy release.
I originally started working on ESPEasy code, because of the poor configurability of this plugin... most likely you need to tweak the settings, indeed
I originally started working on ESPEasy code, because of the poor configurability of this plugin... most likely you need to tweak the settings, indeed
- 01 May 2024, 23:23
- Forum: ESP Easy: Software
- Topic: Monitoring health of ESP nodes within rules
- Replies: 14
- Views: 470
Re: Monitoring health of ESP nodes within rules
@jgrad The PR has been merged, and will be in the next ESPEasy release.
It also now has the added feature of sending events for P2P Nodes when they 'join' or get 'out of sight', for you to respond on.
It also now has the added feature of sending events for P2P Nodes when they 'join' or get 'out of sight', for you to respond on.
- 01 May 2024, 23:20
- Forum: ESP Easy: General Discussion
- Topic: Missing "Notifications" tab in Custom build
- Replies: 10
- Views: 918
Re: Missing "Notifications" tab in Custom build
@damiak The PR has been merged, and will be in the next ESPEasy release.
- 30 Apr 2024, 22:24
- Forum: ESP Easy: Software
- Topic: I2C Multiplexer (TCA9548A) Reset Pin
- Replies: 3
- Views: 94
Re: I2C Multiplexer (TCA9548A) Reset Pin
Thats why I was asking how the reset-pin works in ESPEasy and about the "try to clear i2c bus if stuck" option. Currently iam trying to have this option disabled and see what ESPEasy will do in case of a bad sensor. I can see the "clearing i2c stack..." in the log but it pops up...
- 30 Apr 2024, 20:02
- Forum: ESP Easy: Software
- Topic: I2C Multiplexer (TCA9548A) Reset Pin
- Replies: 3
- Views: 94
Re: I2C Multiplexer (TCA9548A) Reset Pin
Any particular device you use that requires this? As the only I2C sensors I know that are causing I2C bus-issues are the ATH10 & AHT15 temperature/humidity sensors, but those are of mediocre quality anyway, out of production by the original manufacturer, and have properly working replacements in...
- 29 Apr 2024, 21:03
- Forum: ESP Easy: Software
- Topic: Publishing Environment - 1-Wire Temperature Statistics
- Replies: 3
- Views: 87
- 29 Apr 2024, 20:15
- Forum: ESP Easy: Software
- Topic: Publishing Environment - 1-Wire Temperature Statistics
- Replies: 3
- Views: 87
Re: Publishing Environment - 1-Wire Temperature Statistics
This data is currently not available, other than via the web UI. It can however be made available, after a little coding effort
I'll see if that can be added without adding too much code, as this plugin is included in many builds, and some are really cramped for binary size issues
I'll see if that can be added without adding too much code, as this plugin is included in many builds, and some are really cramped for binary size issues
- 29 Apr 2024, 15:54
- Forum: ESP Easy: Software
- Topic: Problem with Dummy and rule for average value
- Replies: 8
- Views: 152
Re: Problem with Dummy and rule for average value
The actually esp2688 is still build in a small housing, to change the hardware, I think I have to build a new housing. The smallest ESP32 I own are the same size and pinout as an ESP01S (using an ESP32-C3 ), so 'quite small'... a little larger are these C3/S3 units , still smaller than a Wemos D1 o...
- 29 Apr 2024, 11:41
- Forum: ESP Easy: Software
- Topic: NeoPixel-038 not working on ESP32s3 zero or mini boards
- Replies: 12
- Views: 220
Re: NeoPixel-038 not working on ESP32s3 zero or mini boards
Can you test using the neopixel, with LittleFS enabled, build I mentioned before? That uses the latest IDF 5.1 framework, that solves many issues still present in the IDF 4.4 used by non-LittleFS ESP32* builds.
- 29 Apr 2024, 10:50
- Forum: ESP Easy: Software
- Topic: NeoPixel-038 not working on ESP32s3 zero or mini boards
- Replies: 12
- Views: 220
Re: NeoPixel-038 not working on ESP32s3 zero or mini boards
The neopixel_ESP32s3_4M316k_LittleFS_CDC build should do the trick here. Be aware that the storage is not migrated from the default SPIFFS to LittleFS, so while you can do an in-place upgrade, then all configuration (except WiFi) will be gone! Or just grab an unused board, then you'll loose nothing ;)
- 29 Apr 2024, 10:46
- Forum: ESP Easy: Software
- Topic: Problem with Dummy and rule for average value
- Replies: 8
- Views: 152
Re: Problem with Dummy and rule for average value
Well, the simplest way to get that going is to use an ESP32 Collection B build (or MAX if you have an ESP32 with 16 MB Flash).
AFAICS, the Custom ESP8266 builds currently also get LIMIT_BUILD_SIZE set, causing the statistics/graphs options to be excluded
AFAICS, the Custom ESP8266 builds currently also get LIMIT_BUILD_SIZE set, causing the statistics/graphs options to be excluded
- 29 Apr 2024, 09:57
- Forum: ESP Easy: Software
- Topic: Problem with Dummy and rule for average value
- Replies: 8
- Views: 152
Re: Problem with Dummy and rule for average value
The build you're using doesn't include the statistics collection, so no average values are available (it's missing the checkboxes to enable that for the Values)
- 28 Apr 2024, 17:44
- Forum: ESP Easy: Projects / Applications
- Topic: Air Quality unit - which devices are best?
- Replies: 75
- Views: 5459
Re: Air Quality unit - which devices are best?
Definitely! And as soon as you jumped in, it was a little Apple marketing like: „it just works”. 😉 Thanks again to everyone involved! Thanks for the compliments 8-) Well, now I could think about a PCB to make it nice and neat. 🤔 No idea if more people would be interested, but maybe wrap it up this ...
- 28 Apr 2024, 17:03
- Forum: ESP Easy: Projects / Applications
- Topic: Air Quality unit - which devices are best?
- Replies: 75
- Views: 5459
Re: Air Quality unit - which devices are best?
So this turns out to be a successful project
- 28 Apr 2024, 16:59
- Forum: ESP Easy: Software
- Topic: NeoPixel-038 not working on ESP32s3 zero or mini boards
- Replies: 12
- Views: 220
Re: NeoPixel-038 not working on ESP32s3 zero or mini boards
What GPIO pin are you using, and does your board have PSRAM on-board? (H4R2 indicates it has 2MB PSRAM, so pins 26..32 should not be used, and also, there is a warning about using ADC2 pins)
- 28 Apr 2024, 15:16
- Forum: ESP Easy: Software
- Topic: NeoPixel-038 not working on ESP32s3 zero or mini boards
- Replies: 12
- Views: 220
Re: NeoPixel-038 not working on ESP32s3 zero or mini boards
A few check questions:
- Is your NeoPixel powered at 5V?
- Do you have a 3.3V/5V level converter installed between the ESP and NeoPixel?
- Is your NeoPixel powered at 5V?
- Do you have a 3.3V/5V level converter installed between the ESP and NeoPixel?
- 27 Apr 2024, 22:03
- Forum: ESP Easy: Projects / Applications
- Topic: Air Quality unit - which devices are best?
- Replies: 75
- Views: 5459
Re: Air Quality unit - which devices are best?
Here is ESP Room SmartMonitor V3. This design may give you a reference. https://www.pcbway.com/project/shareproject/ESP_Room_SmartMonitor_V3_8a9e5a39.html It uses DHT22 (Temperature and humidity sensor) and BH1750 light sensor. For dust sensor, you can use PMSx003 modules. https://espeasy.readthedo...
- 27 Apr 2024, 14:56
- Forum: ESP Easy: Software
- Topic: P2P reliability
- Replies: 23
- Views: 534
- 27 Apr 2024, 11:39
- Forum: ESP Easy: Software
- Topic: P2P reliability
- Replies: 23
- Views: 534
Re: P2P reliability
And having "SendToHTTP wait for ack" enabled will cause similar slowdowns with poor WiFi connections.
- 26 Apr 2024, 16:37
- Forum: ESP Easy: General Discussion
- Topic: Divetens Value one one MAX7219 Display
- Replies: 2
- Views: 85
Re: Divetens Value one one MAX7219 Display
Something like this: on system#boot do LoopTimerSet,1,5 // Perpetual repeating timer endon on rules#timer=1 do let,1,%v1%+1 if %v1% > 4 let,1,1 endif if %v1%=1 DotMatrix,txt,1,"Value1: [MQTT#Value1]" elseif %v1%=2 DotMatrix,txt,1,"Out 2: [MQTT#Value2]" elseif %v1%=3 DotMatrix,txt...
- 26 Apr 2024, 08:59
- Forum: ESP Easy: Software
- Topic: P2P reliability
- Replies: 23
- Views: 534
Re: P2P reliability
It seems that those who use p2p a lot care little about the reliability of the parameters used. Well, we seem to differ in opinion on that then, but that's no problem. Using the P2P connected sensors without issues for a long time, and actively developing on ESPEasy, so if there would have been an ...
- 25 Apr 2024, 22:55
- Forum: ESP Easy: Software
- Topic: Add new sensor (Ambient Light Sensor - VEML6030)
- Replies: 5
- Views: 150
Re: Add new sensor (Ambient Light Sensor - VEML6030)
We already have 3 Light/Lux sensors supported, P010 - BH1750, P015 - TSL2561 and P074 - TSL2591. Only P015 has RTD documentation available, and P010 has the old Wiki docs available. They don't have a max. lux range comparable to the VEML6030/VEML7700 but are fine sensors, and are available in nearly...
- 25 Apr 2024, 21:41
- Forum: ESP Easy: Software
- Topic: IMPROVDEBUG:_168_(invalid) in log
- Replies: 7
- Views: 165
Re: IMPROVDEBUG:_168_(invalid) in log
Are you working on a new plugin with ID P168? As I'm about to assign a number to another planned plugin, but if you are already using that I can also register yours and select the next ID to my planned plugin. Just provide a name and purpose for your plugin.
- 25 Apr 2024, 11:09
- Forum: ESP Easy: General Discussion
- Topic: moving from domoticz to HA
- Replies: 3
- Views: 150
Re: moving from domoticz to HA
ESPEasy supports only 1 MQTT controller to be active at 1 time for sending out data (the first one is used). Simplest alternative is to switch your sensors sending all data to Domoticz from rules, so the Domoticz controller can be disabled, then configure HA Controller configuration during the trans...
- 25 Apr 2024, 11:04
- Forum: ESP Easy: Software
- Topic: Add new sensor (Ambient Light Sensor - VEML6030)
- Replies: 5
- Views: 150
Re: Add new sensor (Ambient Light Sensor - VEML6030)
Ah, I got the impression you could calculate the lux from available values, but that's not the case. I've ordered a VEML7700, that appears to be compatible in lux range with the VEML6030 but is quite a bit cheaper :?, and have to check specs if they are also (fully) software-compatible. Any reason f...
- 24 Apr 2024, 21:34
- Forum: ESP Easy: General Discussion
- Topic: Degree shown in DOT-MAtrix 7219
- Replies: 8
- Views: 150
Re: Degree shown in DOT-MAtrix 7219
Then try:
Code: Select all
DotMatrix,settxt,1,'Pool: [Sens#TEmp]║C'
- 24 Apr 2024, 21:03
- Forum: ESP Easy: General Discussion
- Topic: Degree shown in DOT-MAtrix 7219
- Replies: 8
- Views: 150
Re: Degree shown in DOT-MAtrix 7219
Code: Select all
DotMatrix,settxt,1,'Pool: [Sens#TEmp]{D}C'
- 24 Apr 2024, 21:00
- Forum: ESP Easy: General Discussion
- Topic: Degree shown in DOT-MAtrix 7219
- Replies: 8
- Views: 150
Re: Degree shown in DOT-MAtrix 7219
Well, "°" is not the way to get that degree symbol shown, you should put the ASCII character 186 there: º
Possibly using {D} could work, don't have a display at hand to test, ATM.
Possibly using {D} could work, don't have a display at hand to test, ATM.
- 24 Apr 2024, 20:27
- Forum: ESP Easy: General Discussion
- Topic: Degree shown in DOT-MAtrix 7219
- Replies: 8
- Views: 150
Re: Degree shown in DOT-MAtrix 7219
Of the available fonts, only the Extended ASCII font supports the degree symbol. Depending on the build you're using, this font may or may not be included, you can check that in the Font dropdown list.
The font overview shows what ASCII character to use for making it visible.
The font overview shows what ASCII character to use for making it visible.
- 24 Apr 2024, 14:52
- Forum: ESP Easy: Software
- Topic: Add new sensor (Ambient Light Sensor - VEML6030)
- Replies: 5
- Views: 150
- 23 Apr 2024, 20:58
- Forum: ESP Easy: General Discussion
- Topic: esp01 dht22
- Replies: 5
- Views: 148
Re: esp01 dht22
It's there:BartSr wrote: ↑23 Apr 2024, 20:52 I looked into https://td-er.nl/ESPEasy/
but from there I might have overlooked but anyway, couldnot find a binfile .
- 23 Apr 2024, 19:59
- Forum: ESP Easy: General Discussion
- Topic: esp01 dht22
- Replies: 5
- Views: 148
Re: esp01 dht22
In the list of plugins you can see that this plugin is in the Normal plugin set, implying it's available in nearly all builds. For 1MB ESP8266 units, like the ESP01, there is a Normal 1M (_not_ 4M1M !) build available that you can upload.
- 22 Apr 2024, 23:08
- Forum: ESP Easy: General Discussion
- Topic: Not possible to save rules, GUI is odd and no log
- Replies: 6
- Views: 154
Re: Not possible to save rules, GUI is odd and no log
You could make that dependent on a GPIO pin (with a switch connected), so it doesn't 'waste' all that energy keeping the AP active, as that uses more energy, also when not needed, as that remote site you won't be visiting often, I assume
- 22 Apr 2024, 10:57
- Forum: ESP Easy: Hardware
- Topic: LILYGO T4-S3 ESP32-S3
- Replies: 8
- Views: 346
Re: LILYGO T4-S3 ESP32-S3
Have you seen the real-world dimensions of that display? (the images are somewhat misleading, IMHO) It's only 44mm wide, and 56mm high. And with that 480x600 resolution could result in very small text being displayedbastler11 wrote: ↑18 Apr 2024, 11:51 I had a look on this board:
https://www.amazon.de/dp/B0CRYJC3NW/
- 21 Apr 2024, 23:26
- Forum: ESP Easy: Software
- Topic: Monitoring health of ESP nodes within rules
- Replies: 14
- Views: 470
Re: Monitoring health of ESP nodes within rules
Can you also add possibility to fetch load of selected node? Well, I wasn't sure if that would be useful, but as you're asking for it I've added it. And I also added the Type column value, both numeric and string-converted, that shows the type of chip in the remote unit (not only ESP's... ;)) A new...
- 21 Apr 2024, 20:38
- Forum: ESP Easy: General Discussion
- Topic: Not possible to save rules, GUI is odd and no log
- Replies: 6
- Views: 154
Re: Not possible to save rules, GUI is odd and no log
For uploading files onto the local file system, there is a button "File browser" (near the bottom of the Tools tab), that has an "Upload" button to add files there. The files have to be on the device where you run the webbrowser. There is a little snag in your intended setup: Aft...
- 21 Apr 2024, 20:21
- Forum: ESP Easy: Projects / Applications
- Topic: Air Quality unit - which devices are best?
- Replies: 75
- Views: 5459
Re: Air Quality unit - which devices are best?
The temperature offset seems consistent for this sensor, as I see a similar delta. The intended use of the sensor is for temperature compensation of the measurements, not to supply the ambient temperature value :? when configured for Ikea Vindstyrka, an additional compensation is applied in the code...
- 21 Apr 2024, 17:32
- Forum: ESP Easy: Software
- Topic: Monitoring health of ESP nodes within rules
- Replies: 14
- Views: 470
Re: Monitoring health of ESP nodes within rules
@jgrad I've created pull request #5039 to add the request conversions. The names are somewhat different then requested, as conversions are required to start with "%c_". Quick documentation available in the PR. (Documentation is also updated, and will be deployed on ESPEasy RTD when the PR ...
- 21 Apr 2024, 13:07
- Forum: ESP Easy: General Discussion
- Topic: Not possible to save rules, GUI is odd and no log
- Replies: 6
- Views: 154
Re: Not possible to save rules, GUI is odd and no log
It seems your browser doesn't download additional files from the cdn (content delivery network) implying that access to the internet (by the browser) is required, sometimes it's enough to do a forced refresh in the browser, if that won't work, you can also upload the .js and .css files to the filesy...
- 20 Apr 2024, 23:21
- Forum: ESP Easy: Projects / Applications
- Topic: Air Quality unit - which devices are best?
- Replies: 75
- Views: 5459
Re: Air Quality unit - which devices are best?
@localhorst (and others) I've created PR #5038 that a) cleans up the code somewhat, and b) add support for stand-alone use with a Sensirion SEN5x sensor (currently support for SEN54 and SEN55). A build is running in this Actions run I've included the plugin in the Climate and MAX builds. Report any ...
- 20 Apr 2024, 20:16
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 875
Re: Which Bin for flashing ESP32-C3 ETH01 evo
I had in mind that the factory-version will erase all settings.. But that seems not true.. To reset/clear the flash you have to explicitly erase it, either form the Flash Download Tool, the Web Flasher, or by applying the reset command from ESPEasy, but that last one just 'emulates' a wipe by erasi...
- 20 Apr 2024, 20:12
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 875
Re: Which Bin for flashing ESP32-C3 ETH01 evo
The factory.bin includes the bootloader and partitioning data in addition to the sketch (Arduino term), and has to be flashed from address 0x0 on the flash, the non-factory.bin file only includes the sketch, and has to be installed at address 0x10000 (or on the second APP partition, but then the sta...
- 20 Apr 2024, 17:00
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 875
Re: Which Bin for flashing ESP32-C3 ETH01 evo
No progress with uploading the new firmware... After one hour I took off the power. After reboot no sign of live on ethernet of wifi. So I decided to flash by USB2serial again with the ESP_Easy_mega_20240419_custom_ESP32c3_4M316k_LittleFS_CDC_ETH.factory.bin. The SSID showed up but same problem as ...
- 20 Apr 2024, 16:47
- Forum: ESP Easy: Software
- Topic: IMPROVDEBUG:_168_(invalid) in log
- Replies: 7
- Views: 165
Re: IMPROVDEBUG:_168_(invalid) in log
The message you have shown is only found in the IMPROV handler, that's why I asked. Most likely you have some unclosed structure, or a missing break somewhere in your code, or are calling some uninitialized class method, that accidentally points somewhere in the IMPROV code :o . The plugin reads a v...
- 19 Apr 2024, 23:19
- Forum: ESP Easy: Software
- Topic: IMPROVDEBUG:_168_(invalid) in log
- Replies: 7
- Views: 165
Re: IMPROVDEBUG:_168_(invalid) in log
What does your plugin do to trigger the IMPROV serial handler? Got some 'handle' method that's not bound to a specific class?
- 19 Apr 2024, 23:15
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 875
Re: Which Bin for flashing ESP32-C3 ETH01 evo
No problem, you can upgrade via the Firmware Update button on the Tools page, as long as you use the same ESP model (C3), Flash layout (4M316k), Filesystem (LittleFS) and ETH feature. But for the C3 there's no Energy build with those features available... Here's a Custom C3 build that does include t...
- 19 Apr 2024, 21:28
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 875
Re: Which Bin for flashing ESP32-C3 ETH01 evo
The GPIO pins are wired that way, so it's the only way to make it work... For this device you can ignore the warnings.
F.e. GPIO-9 is the pin to pull the device into flash-mode, but in this setup it's used as an output-pin so no issue.
F.e. GPIO-9 is the pin to pull the device into flash-mode, but in this setup it's used as an output-pin so no issue.
- 19 Apr 2024, 20:59
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 875
Re: Which Bin for flashing ESP32-C3 ETH01 evo
Well, you got where you wanted to go but it took some effort...
Once you connect a few more ESP's you get more experienced, so it will go a bit smoother, we've all been there and done that
Once you connect a few more ESP's you get more experienced, so it will go a bit smoother, we've all been there and done that