It's there:BartSr wrote: ↑23 Apr 2024, 20:52 I looked into https://td-er.nl/ESPEasy/
but from there I might have overlooked but anyway, couldnot find a binfile .
Search found 3508 matches
- 23 Apr 2024, 20:58
- Forum: ESP Easy: General Discussion
- Topic: esp01 dht22
- Replies: 5
- Views: 74
Re: esp01 dht22
- 23 Apr 2024, 19:59
- Forum: ESP Easy: General Discussion
- Topic: esp01 dht22
- Replies: 5
- Views: 74
Re: esp01 dht22
In the list of plugins you can see that this plugin is in the Normal plugin set, implying it's available in nearly all builds. For 1MB ESP8266 units, like the ESP01, there is a Normal 1M (_not_ 4M1M !) build available that you can upload.
- 22 Apr 2024, 23:08
- Forum: ESP Easy: General Discussion
- Topic: Not possible to save rules, GUI is odd and no log
- Replies: 6
- Views: 96
Re: Not possible to save rules, GUI is odd and no log
You could make that dependent on a GPIO pin (with a switch connected), so it doesn't 'waste' all that energy keeping the AP active, as that uses more energy, also when not needed, as that remote site you won't be visiting often, I assume
- 22 Apr 2024, 10:57
- Forum: ESP Easy: Hardware
- Topic: LILYGO T4-S3 ESP32-S3
- Replies: 8
- Views: 174
Re: LILYGO T4-S3 ESP32-S3
Have you seen the real-world dimensions of that display? (the images are somewhat misleading, IMHO) It's only 44mm wide, and 56mm high. And with that 480x600 resolution could result in very small text being displayedbastler11 wrote: ↑18 Apr 2024, 11:51 I had a look on this board:
https://www.amazon.de/dp/B0CRYJC3NW/
- 21 Apr 2024, 23:26
- Forum: ESP Easy: Software
- Topic: Monitoring health of ESP nodes within rules
- Replies: 13
- Views: 244
Re: Monitoring health of ESP nodes within rules
Can you also add possibility to fetch load of selected node? Well, I wasn't sure if that would be useful, but as you're asking for it I've added it. And I also added the Type column value, both numeric and string-converted, that shows the type of chip in the remote unit (not only ESP's... ;)) A new...
- 21 Apr 2024, 20:38
- Forum: ESP Easy: General Discussion
- Topic: Not possible to save rules, GUI is odd and no log
- Replies: 6
- Views: 96
Re: Not possible to save rules, GUI is odd and no log
For uploading files onto the local file system, there is a button "File browser" (near the bottom of the Tools tab), that has an "Upload" button to add files there. The files have to be on the device where you run the webbrowser. There is a little snag in your intended setup: Aft...
- 21 Apr 2024, 20:21
- Forum: ESP Easy: Projects / Applications
- Topic: Air Quality unit - which devices are best?
- Replies: 68
- Views: 3337
Re: Air Quality unit - which devices are best?
The temperature offset seems consistent for this sensor, as I see a similar delta. The intended use of the sensor is for temperature compensation of the measurements, not to supply the ambient temperature value :? when configured for Ikea Vindstyrka, an additional compensation is applied in the code...
- 21 Apr 2024, 17:32
- Forum: ESP Easy: Software
- Topic: Monitoring health of ESP nodes within rules
- Replies: 13
- Views: 244
Re: Monitoring health of ESP nodes within rules
@jgrad I've created pull request #5039 to add the request conversions. The names are somewhat different then requested, as conversions are required to start with "%c_". Quick documentation available in the PR. (Documentation is also updated, and will be deployed on ESPEasy RTD when the PR ...
- 21 Apr 2024, 13:07
- Forum: ESP Easy: General Discussion
- Topic: Not possible to save rules, GUI is odd and no log
- Replies: 6
- Views: 96
Re: Not possible to save rules, GUI is odd and no log
It seems your browser doesn't download additional files from the cdn (content delivery network) implying that access to the internet (by the browser) is required, sometimes it's enough to do a forced refresh in the browser, if that won't work, you can also upload the .js and .css files to the filesy...
- 20 Apr 2024, 23:21
- Forum: ESP Easy: Projects / Applications
- Topic: Air Quality unit - which devices are best?
- Replies: 68
- Views: 3337
Re: Air Quality unit - which devices are best?
@localhorst (and others) I've created PR #5038 that a) cleans up the code somewhat, and b) add support for stand-alone use with a Sensirion SEN5x sensor (currently support for SEN54 and SEN55). A build is running in this Actions run I've included the plugin in the Climate and MAX builds. Report any ...
- 20 Apr 2024, 20:16
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 689
Re: Which Bin for flashing ESP32-C3 ETH01 evo
I had in mind that the factory-version will erase all settings.. But that seems not true.. To reset/clear the flash you have to explicitly erase it, either form the Flash Download Tool, the Web Flasher, or by applying the reset command from ESPEasy, but that last one just 'emulates' a wipe by erasi...
- 20 Apr 2024, 20:12
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 689
Re: Which Bin for flashing ESP32-C3 ETH01 evo
The factory.bin includes the bootloader and partitioning data in addition to the sketch (Arduino term), and has to be flashed from address 0x0 on the flash, the non-factory.bin file only includes the sketch, and has to be installed at address 0x10000 (or on the second APP partition, but then the sta...
- 20 Apr 2024, 17:00
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 689
Re: Which Bin for flashing ESP32-C3 ETH01 evo
No progress with uploading the new firmware... After one hour I took off the power. After reboot no sign of live on ethernet of wifi. So I decided to flash by USB2serial again with the ESP_Easy_mega_20240419_custom_ESP32c3_4M316k_LittleFS_CDC_ETH.factory.bin. The SSID showed up but same problem as ...
- 20 Apr 2024, 16:47
- Forum: ESP Easy: Software
- Topic: IMPROVDEBUG:_168_(invalid) in log
- Replies: 4
- Views: 70
Re: IMPROVDEBUG:_168_(invalid) in log
The message you have shown is only found in the IMPROV handler, that's why I asked. Most likely you have some unclosed structure, or a missing break somewhere in your code, or are calling some uninitialized class method, that accidentally points somewhere in the IMPROV code :o . The plugin reads a v...
- 19 Apr 2024, 23:19
- Forum: ESP Easy: Software
- Topic: IMPROVDEBUG:_168_(invalid) in log
- Replies: 4
- Views: 70
Re: IMPROVDEBUG:_168_(invalid) in log
What does your plugin do to trigger the IMPROV serial handler? Got some 'handle' method that's not bound to a specific class?
- 19 Apr 2024, 23:15
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 689
Re: Which Bin for flashing ESP32-C3 ETH01 evo
No problem, you can upgrade via the Firmware Update button on the Tools page, as long as you use the same ESP model (C3), Flash layout (4M316k), Filesystem (LittleFS) and ETH feature. But for the C3 there's no Energy build with those features available... Here's a Custom C3 build that does include t...
- 19 Apr 2024, 21:28
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 689
Re: Which Bin for flashing ESP32-C3 ETH01 evo
The GPIO pins are wired that way, so it's the only way to make it work... For this device you can ignore the warnings.
F.e. GPIO-9 is the pin to pull the device into flash-mode, but in this setup it's used as an output-pin so no issue.
F.e. GPIO-9 is the pin to pull the device into flash-mode, but in this setup it's used as an output-pin so no issue.
- 19 Apr 2024, 20:59
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 689
Re: Which Bin for flashing ESP32-C3 ETH01 evo
Well, you got where you wanted to go but it took some effort...
Once you connect a few more ESP's you get more experienced, so it will go a bit smoother, we've all been there and done that
Once you connect a few more ESP's you get more experienced, so it will go a bit smoother, we've all been there and done that
- 19 Apr 2024, 20:18
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 689
Re: Which Bin for flashing ESP32-C3 ETH01 evo
Does your browser automatically use https protocol, instead of http ? as https is not (yet) supported by ESPEasy. Euhm, why is port 80..87 blocked on your device? The webserver is available at port 80. Looks like you have some security software running (might be anti-virus or anti-hacking software) ...
- 19 Apr 2024, 15:45
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 689
Re: Which Bin for flashing ESP32-C3 ETH01 evo
How did you upload the binary to the ETH unit, via the Web Flasher or via the Espressif Flash Download tool?
- 18 Apr 2024, 23:15
- Forum: ESP Easy: Software
- Topic: Monitoring health of ESP nodes within rules
- Replies: 13
- Views: 244
- 18 Apr 2024, 22:26
- Forum: ESP Easy: Software
- Topic: Missing DEBUG Option for Weblog
- Replies: 5
- Views: 110
Re: Missing DEBUG Option for Weblog
I use the Serial plugin. It was useful to see what was sent or received.. to my board .. I assume that's the Serial Server plugin? P020/P044 (Serial Proxy P087 is not included in the Normal builds) AFAICS, that plugin doesn't log the incoming data separately, but you can see most data logged at INF...
- 18 Apr 2024, 21:28
- Forum: ESP Easy: Software
- Topic: Missing DEBUG Option for Weblog
- Replies: 5
- Views: 110
Re: Missing DEBUG Option for Weblog
The debug logging has been disabled for ESP8266 Normal builds for a couple of months.
What debug log would you want to see? As not much information in that log level is usable for non-developers
What debug log would you want to see? As not much information in that log level is usable for non-developers
- 18 Apr 2024, 20:47
- Forum: ESP Easy: Software
- Topic: Monitoring health of ESP nodes within rules
- Replies: 13
- Views: 244
Re: Monitoring health of ESP nodes within rules
You can not get the JSON output from rules from the same ESP, and you can't process the resulting (large) json-text.jgrad wrote: ↑18 Apr 2024, 20:32 Values are available in response to http://localhost/json but I dont know how to get this response and parse it within rules.
We'll try to add the functions.
- 18 Apr 2024, 20:44
- Forum: ESP Easy: Software
- Topic: Missing DEBUG Option for Weblog
- Replies: 5
- Views: 110
Re: Missing DEBUG Option for Weblog
What exact build have you installed?
- 18 Apr 2024, 14:59
- Forum: ESP Easy: Hardware
- Topic: LILYGO T4-S3 ESP32-S3
- Replies: 8
- Views: 174
Re: LILYGO T4-S3 ESP32-S3
One more question: how could I get an information that somebody answers on my question, is there a switch in the settings? If you go to your User Control Panel (dropdown menu top-right, next to your username), Select 'Board Preferences', then 'Edit notification options', you can determine what noti...
- 18 Apr 2024, 11:06
- Forum: ESP Easy: Hardware
- Topic: LILYGO T4-S3 ESP32-S3
- Replies: 8
- Views: 174
Re: LILYGO T4-S3 ESP32-S3
What version of that board do you have in mind? There are a couple of different versions, also quite different in price ( $30,- .. $75,- ) ... :o At the moment the display controller in those boards isn't supported (it's not using 'standard' SPI but a 4 or 8 bit parallel connection), but there has b...
- 17 Apr 2024, 20:09
- Forum: ESP Easy: Projects / Applications
- Topic: YALP (yet another LoRa/LoRaWAN project)
- Replies: 5
- Views: 162
Re: YALP (yet another LoRa/LoRaWAN project)
That's a great project, and all the implementation details, and decisions you made, make it a very inspiring read. Thanks!
- 14 Apr 2024, 16:20
- Forum: ESP Easy: Projects / Applications
- Topic: Counting time, calculate and display?
- Replies: 147
- Views: 2913
- 14 Apr 2024, 13:59
- Forum: ESP Easy: Projects / Applications
- Topic: Counting time, calculate and display?
- Replies: 147
- Views: 2913
Re: Counting time, calculate and display?
What exact build are your ESP32-S3 running? If not on the build from https://td-er.nl/espeasy/latest (20240412 or later) you may have issues caused by wonky USBCDC software, that's finally fixed in the latest build (is merged yesterday into "mega")
- 13 Apr 2024, 13:49
- Forum: ESP Easy: Projects / Applications
- Topic: Counting time, calculate and display?
- Replies: 147
- Views: 2913
Re: Counting time, calculate and display?
I'm going to get some sleep. When you're over 60, a day like this is a bit tiring... I can confirm that ;) While you're at it, maybe you can also take a short look at the display-sleep issue. Possibly it's just a small thing why this option is ignored... This part is of bigger importance IMHO, and ...
- 13 Apr 2024, 13:43
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 689
Re: Which Bin for flashing ESP32-C3 ETH01 evo
Was considering: why are there not so many GPIO-pins available on this board? See the picture above. The ESP32-C3 doesn't have that many GPIO pins, and a couple are directly wired to the Ethernet chip it seems (they are partly for SPI, so these could have been external as well for other SPI devices...
- 12 Apr 2024, 21:53
- Forum: ESP Easy: Hardware
- Topic: [SOLVED] pb ESP32 + W5500 lite
- Replies: 19
- Views: 531
Re: pb ESP32 + W5500 lite
That version is not in list of the above link... :? So I think your answer should be No. yes it is: Screenshot - 12-04-2024 , 21_22_25.png I want to use that pcb to read the Eastron SDM630M But that plugin isn't included in the Custom build. Getting that PR local in VSCode, you're able to create a ...
- 12 Apr 2024, 20:53
- Forum: ESP Easy: Software
- Topic: Sonoff MS01 value
- Replies: 3
- Views: 100
Re: Sonoff MS01 value
It looks like ESPEasy provides the raw measurement value indeed, but looking at the Tasmota code, where the ESPEasy code is based on, they don't provide a temperature value but 0. Don't know why the raw value is provided here, but I suggest to ignore it, as it isn't useful. The humidity is calculate...
- 12 Apr 2024, 20:28
- Forum: ESP Easy: Hardware
- Topic: [SOLVED] pb ESP32 + W5500 lite
- Replies: 19
- Views: 531
- 12 Apr 2024, 08:43
- Forum: ESP Easy: Software
- Topic: NeoPixel Matrix doesn't work correctly
- Replies: 29
- Views: 599
Re: NeoPixel Matrix doesn't work correctly
After installing the level converter, the main problem went away, only periodically appearing colored artifacts remained throughout the field. Great. Those odd artifacts may be caused by general timing issues of the S2, as said, that's not the most stable ESP32 chip :? It is also not clear why ther...
- 12 Apr 2024, 08:21
- Forum: ESP Easy: Software
- Topic: NeoPixel Matrix doesn't work correctly
- Replies: 29
- Views: 599
Re: NeoPixel Matrix doesn't work correctly
With that configuration it should work as intended, so it probably comes down to some technical (or timing) issue. NB: With this configuration, rotating the display by 90 degrees, can be done by setting "Matrix start-pixel" to "Top/Right", and Rows/Columns mode to "Columns&q...
- 12 Apr 2024, 08:06
- Forum: ESP Easy: General Discussion
- Topic: Run event via MQTT
- Replies: 2
- Views: 93
Re: Run event via MQTT
You're close.
But luckily it's all documented, specifically for the Home Assistant controller
https://espeasy.readthedocs.io/en/lates ... ing-events
But luckily it's all documented, specifically for the Home Assistant controller
https://espeasy.readthedocs.io/en/lates ... ing-events
- 11 Apr 2024, 14:27
- Forum: ESP Easy: Software
- Topic: NeoPixel Matrix doesn't work correctly
- Replies: 29
- Views: 599
Re: NeoPixel Matrix doesn't work correctly
Can you show the configuration settings of your plugin? (a screenshot, as an attachment in the forum, is fine)
- 11 Apr 2024, 11:55
- Forum: ESP Easy: Software
- Topic: NeoPixel Matrix doesn't work correctly
- Replies: 29
- Views: 599
- 11 Apr 2024, 10:03
- Forum: ESP Easy: Projects / Applications
- Topic: Counting time, calculate and display?
- Replies: 147
- Views: 2913
Re: Counting time, calculate and display?
I think I can add a new variable to the GPS Plugin, providing that Fix value, it seems useful...
- 11 Apr 2024, 08:05
- Forum: ESP Easy: Software
- Topic: NeoPixel Matrix doesn't work correctly
- Replies: 29
- Views: 599
Re: NeoPixel Matrix doesn't work correctly
I already tried 32x4, I don’t understand how to make 16x8 without cutting and resoldering. I tried to put 32x16 although in fact I have 32x8 and 1 line started working fine for me. It turns out that the second half always does not work when running the line starting from 32x4. Reading back the mess...
- 11 Apr 2024, 08:00
- Forum: ESP Easy: Projects / Applications
- Topic: Counting time, calculate and display?
- Replies: 147
- Views: 2913
- 10 Apr 2024, 20:13
- Forum: ESP Easy: Projects / Applications
- Topic: Counting time, calculate and display?
- Replies: 147
- Views: 2913
Re: Counting time, calculate and display?
... some hint to lighten the day: :lol: :lol: :lol: 1.: Header line It actually works, apart from the fact that the WLAN symbol cannot be removed or, at best, you can choose one symbol from several (WLAN, BT, GPS, ...). However, this immediately goes wrong if you set "Header" = Date and &...
- 10 Apr 2024, 13:09
- Forum: ESP Easy: Software
- Topic: NeoPixel Matrix doesn't work correctly
- Replies: 29
- Views: 599
Re: NeoPixel Matrix doesn't work correctly
Without cutting the tape you can still configure it for 32x4 or 16x8, the only thing we want to determine is if your issue is caused by timing or not, so we 'give' it half of the neopixels to control. Then it's less timing-critical.
- 10 Apr 2024, 13:04
- Forum: ESP Easy: General Discussion
- Topic: How to get the frame number of an oled frame device
- Replies: 6
- Views: 230
Re: How to get the frame number of an oled frame device
1) Can you please use code blocks (the </> button in the toolbar) to wrap rules code in? 2) There is no [Display#Frame] variable . There can be an event Display#Frame=<framenr> if you have enabled that Generate events option (if that's available, else you're out of luck.) But: Have you changed the I...
- 10 Apr 2024, 11:03
- Forum: ESP Easy: Software
- Topic: NeoPixel Matrix doesn't work correctly
- Replies: 29
- Views: 599
Re: NeoPixel Matrix doesn't work correctly
How is your matrix configured? Do you have a manually assembled matrix of 32 pixels long, and 8 high, or are you using pre-assembled 8x8 modules?
- 10 Apr 2024, 11:02
- Forum: ESP Easy: General Discussion
- Topic: How to get the frame number of an oled frame device
- Replies: 6
- Views: 230
Re: How to get the frame number of an oled frame device
Also, the ESPEasy rules syntax is somewhat different from the Tasmota syntax, see the ESPEasy docs on Rules
- 10 Apr 2024, 11:00
- Forum: ESP Easy: General Discussion
- Topic: How to get the frame number of an oled frame device
- Replies: 6
- Views: 230
Re: How to get the frame number of an oled frame device
The frame should be auto-incremented every Interval seconds as configured in the task. If you leave that on 0 there will be no updates... Once you manually select the desired Frame, using the "oledframedcmd,frame,<framenumber>" command, or automatically update to the next frame, the predef...
- 09 Apr 2024, 20:31
- Forum: ESP Easy: Projects / Applications
- Topic: Counting time, calculate and display?
- Replies: 147
- Views: 2913