A small typo, should be "on info#uptime do", the rest of the script is ok.
Search found 3521 matches
- 27 Apr 2024, 14:56
- Forum: ESP Easy: Software
- Topic: P2P reliability
- Replies: 17
- Views: 238
- 27 Apr 2024, 11:39
- Forum: ESP Easy: Software
- Topic: P2P reliability
- Replies: 17
- Views: 238
Re: P2P reliability
And having "SendToHTTP wait for ack" enabled will cause similar slowdowns with poor WiFi connections.
- 26 Apr 2024, 16:37
- Forum: ESP Easy: General Discussion
- Topic: Divetens Value one one MAX7219 Display
- Replies: 2
- Views: 41
Re: Divetens Value one one MAX7219 Display
Something like this: on system#boot do LoopTimerSet,1,5 // Perpetual repeating timer endon on rules#timer=1 do let,1,%v1%+1 if %v1% > 4 let,1,1 endif if %v1%=1 DotMatrix,txt,1,"Value1: [MQTT#Value1]" elseif %v1%=2 DotMatrix,txt,1,"Out 2: [MQTT#Value2]" elseif %v1%=3 DotMatrix,txt...
- 26 Apr 2024, 08:59
- Forum: ESP Easy: Software
- Topic: P2P reliability
- Replies: 17
- Views: 238
Re: P2P reliability
It seems that those who use p2p a lot care little about the reliability of the parameters used. Well, we seem to differ in opinion on that then, but that's no problem. Using the P2P connected sensors without issues for a long time, and actively developing on ESPEasy, so if there would have been an ...
- 25 Apr 2024, 22:55
- Forum: ESP Easy: Software
- Topic: Add new sensor (Ambient Light Sensor - VEML6030)
- Replies: 5
- Views: 109
Re: Add new sensor (Ambient Light Sensor - VEML6030)
We already have 3 Light/Lux sensors supported, P010 - BH1750, P015 - TSL2561 and P074 - TSL2591. Only P015 has RTD documentation available, and P010 has the old Wiki docs available. They don't have a max. lux range comparable to the VEML6030/VEML7700 but are fine sensors, and are available in nearly...
- 25 Apr 2024, 21:41
- Forum: ESP Easy: Software
- Topic: IMPROVDEBUG:_168_(invalid) in log
- Replies: 7
- Views: 132
Re: IMPROVDEBUG:_168_(invalid) in log
Are you working on a new plugin with ID P168? As I'm about to assign a number to another planned plugin, but if you are already using that I can also register yours and select the next ID to my planned plugin. Just provide a name and purpose for your plugin.
- 25 Apr 2024, 11:09
- Forum: ESP Easy: General Discussion
- Topic: moving from domoticz to HA
- Replies: 2
- Views: 63
Re: moving from domoticz to HA
ESPEasy supports only 1 MQTT controller to be active at 1 time for sending out data (the first one is used). Simplest alternative is to switch your sensors sending all data to Domoticz from rules, so the Domoticz controller can be disabled, then configure HA Controller configuration during the trans...
- 25 Apr 2024, 11:04
- Forum: ESP Easy: Software
- Topic: Add new sensor (Ambient Light Sensor - VEML6030)
- Replies: 5
- Views: 109
Re: Add new sensor (Ambient Light Sensor - VEML6030)
Ah, I got the impression you could calculate the lux from available values, but that's not the case. I've ordered a VEML7700, that appears to be compatible in lux range with the VEML6030 but is quite a bit cheaper :?, and have to check specs if they are also (fully) software-compatible. Any reason f...
- 24 Apr 2024, 21:34
- Forum: ESP Easy: General Discussion
- Topic: Degree shown in DOT-MAtrix 7219
- Replies: 8
- Views: 107
Re: Degree shown in DOT-MAtrix 7219
Then try:
Code: Select all
DotMatrix,settxt,1,'Pool: [Sens#TEmp]║C'
- 24 Apr 2024, 21:03
- Forum: ESP Easy: General Discussion
- Topic: Degree shown in DOT-MAtrix 7219
- Replies: 8
- Views: 107
Re: Degree shown in DOT-MAtrix 7219
Code: Select all
DotMatrix,settxt,1,'Pool: [Sens#TEmp]{D}C'
- 24 Apr 2024, 21:00
- Forum: ESP Easy: General Discussion
- Topic: Degree shown in DOT-MAtrix 7219
- Replies: 8
- Views: 107
Re: Degree shown in DOT-MAtrix 7219
Well, "°" is not the way to get that degree symbol shown, you should put the ASCII character 186 there: º
Possibly using {D} could work, don't have a display at hand to test, ATM.
Possibly using {D} could work, don't have a display at hand to test, ATM.
- 24 Apr 2024, 20:27
- Forum: ESP Easy: General Discussion
- Topic: Degree shown in DOT-MAtrix 7219
- Replies: 8
- Views: 107
Re: Degree shown in DOT-MAtrix 7219
Of the available fonts, only the Extended ASCII font supports the degree symbol. Depending on the build you're using, this font may or may not be included, you can check that in the Font dropdown list.
The font overview shows what ASCII character to use for making it visible.
The font overview shows what ASCII character to use for making it visible.
- 24 Apr 2024, 14:52
- Forum: ESP Easy: Software
- Topic: Add new sensor (Ambient Light Sensor - VEML6030)
- Replies: 5
- Views: 109
- 23 Apr 2024, 20:58
- Forum: ESP Easy: General Discussion
- Topic: esp01 dht22
- Replies: 5
- Views: 113
Re: esp01 dht22
It's there:BartSr wrote: ↑23 Apr 2024, 20:52 I looked into https://td-er.nl/ESPEasy/
but from there I might have overlooked but anyway, couldnot find a binfile .
- 23 Apr 2024, 19:59
- Forum: ESP Easy: General Discussion
- Topic: esp01 dht22
- Replies: 5
- Views: 113
Re: esp01 dht22
In the list of plugins you can see that this plugin is in the Normal plugin set, implying it's available in nearly all builds. For 1MB ESP8266 units, like the ESP01, there is a Normal 1M (_not_ 4M1M !) build available that you can upload.
- 22 Apr 2024, 23:08
- Forum: ESP Easy: General Discussion
- Topic: Not possible to save rules, GUI is odd and no log
- Replies: 6
- Views: 118
Re: Not possible to save rules, GUI is odd and no log
You could make that dependent on a GPIO pin (with a switch connected), so it doesn't 'waste' all that energy keeping the AP active, as that uses more energy, also when not needed, as that remote site you won't be visiting often, I assume
- 22 Apr 2024, 10:57
- Forum: ESP Easy: Hardware
- Topic: LILYGO T4-S3 ESP32-S3
- Replies: 8
- Views: 228
Re: LILYGO T4-S3 ESP32-S3
Have you seen the real-world dimensions of that display? (the images are somewhat misleading, IMHO) It's only 44mm wide, and 56mm high. And with that 480x600 resolution could result in very small text being displayedbastler11 wrote: ↑18 Apr 2024, 11:51 I had a look on this board:
https://www.amazon.de/dp/B0CRYJC3NW/
- 21 Apr 2024, 23:26
- Forum: ESP Easy: Software
- Topic: Monitoring health of ESP nodes within rules
- Replies: 13
- Views: 298
Re: Monitoring health of ESP nodes within rules
Can you also add possibility to fetch load of selected node? Well, I wasn't sure if that would be useful, but as you're asking for it I've added it. And I also added the Type column value, both numeric and string-converted, that shows the type of chip in the remote unit (not only ESP's... ;)) A new...
- 21 Apr 2024, 20:38
- Forum: ESP Easy: General Discussion
- Topic: Not possible to save rules, GUI is odd and no log
- Replies: 6
- Views: 118
Re: Not possible to save rules, GUI is odd and no log
For uploading files onto the local file system, there is a button "File browser" (near the bottom of the Tools tab), that has an "Upload" button to add files there. The files have to be on the device where you run the webbrowser. There is a little snag in your intended setup: Aft...
- 21 Apr 2024, 20:21
- Forum: ESP Easy: Projects / Applications
- Topic: Air Quality unit - which devices are best?
- Replies: 68
- Views: 3849
Re: Air Quality unit - which devices are best?
The temperature offset seems consistent for this sensor, as I see a similar delta. The intended use of the sensor is for temperature compensation of the measurements, not to supply the ambient temperature value :? when configured for Ikea Vindstyrka, an additional compensation is applied in the code...
- 21 Apr 2024, 17:32
- Forum: ESP Easy: Software
- Topic: Monitoring health of ESP nodes within rules
- Replies: 13
- Views: 298
Re: Monitoring health of ESP nodes within rules
@jgrad I've created pull request #5039 to add the request conversions. The names are somewhat different then requested, as conversions are required to start with "%c_". Quick documentation available in the PR. (Documentation is also updated, and will be deployed on ESPEasy RTD when the PR ...
- 21 Apr 2024, 13:07
- Forum: ESP Easy: General Discussion
- Topic: Not possible to save rules, GUI is odd and no log
- Replies: 6
- Views: 118
Re: Not possible to save rules, GUI is odd and no log
It seems your browser doesn't download additional files from the cdn (content delivery network) implying that access to the internet (by the browser) is required, sometimes it's enough to do a forced refresh in the browser, if that won't work, you can also upload the .js and .css files to the filesy...
- 20 Apr 2024, 23:21
- Forum: ESP Easy: Projects / Applications
- Topic: Air Quality unit - which devices are best?
- Replies: 68
- Views: 3849
Re: Air Quality unit - which devices are best?
@localhorst (and others) I've created PR #5038 that a) cleans up the code somewhat, and b) add support for stand-alone use with a Sensirion SEN5x sensor (currently support for SEN54 and SEN55). A build is running in this Actions run I've included the plugin in the Climate and MAX builds. Report any ...
- 20 Apr 2024, 20:16
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 783
Re: Which Bin for flashing ESP32-C3 ETH01 evo
I had in mind that the factory-version will erase all settings.. But that seems not true.. To reset/clear the flash you have to explicitly erase it, either form the Flash Download Tool, the Web Flasher, or by applying the reset command from ESPEasy, but that last one just 'emulates' a wipe by erasi...
- 20 Apr 2024, 20:12
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 783
Re: Which Bin for flashing ESP32-C3 ETH01 evo
The factory.bin includes the bootloader and partitioning data in addition to the sketch (Arduino term), and has to be flashed from address 0x0 on the flash, the non-factory.bin file only includes the sketch, and has to be installed at address 0x10000 (or on the second APP partition, but then the sta...
- 20 Apr 2024, 17:00
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 783
Re: Which Bin for flashing ESP32-C3 ETH01 evo
No progress with uploading the new firmware... After one hour I took off the power. After reboot no sign of live on ethernet of wifi. So I decided to flash by USB2serial again with the ESP_Easy_mega_20240419_custom_ESP32c3_4M316k_LittleFS_CDC_ETH.factory.bin. The SSID showed up but same problem as ...
- 20 Apr 2024, 16:47
- Forum: ESP Easy: Software
- Topic: IMPROVDEBUG:_168_(invalid) in log
- Replies: 7
- Views: 132
Re: IMPROVDEBUG:_168_(invalid) in log
The message you have shown is only found in the IMPROV handler, that's why I asked. Most likely you have some unclosed structure, or a missing break somewhere in your code, or are calling some uninitialized class method, that accidentally points somewhere in the IMPROV code :o . The plugin reads a v...
- 19 Apr 2024, 23:19
- Forum: ESP Easy: Software
- Topic: IMPROVDEBUG:_168_(invalid) in log
- Replies: 7
- Views: 132
Re: IMPROVDEBUG:_168_(invalid) in log
What does your plugin do to trigger the IMPROV serial handler? Got some 'handle' method that's not bound to a specific class?
- 19 Apr 2024, 23:15
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 783
Re: Which Bin for flashing ESP32-C3 ETH01 evo
No problem, you can upgrade via the Firmware Update button on the Tools page, as long as you use the same ESP model (C3), Flash layout (4M316k), Filesystem (LittleFS) and ETH feature. But for the C3 there's no Energy build with those features available... Here's a Custom C3 build that does include t...
- 19 Apr 2024, 21:28
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 783
Re: Which Bin for flashing ESP32-C3 ETH01 evo
The GPIO pins are wired that way, so it's the only way to make it work... For this device you can ignore the warnings.
F.e. GPIO-9 is the pin to pull the device into flash-mode, but in this setup it's used as an output-pin so no issue.
F.e. GPIO-9 is the pin to pull the device into flash-mode, but in this setup it's used as an output-pin so no issue.
- 19 Apr 2024, 20:59
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 783
Re: Which Bin for flashing ESP32-C3 ETH01 evo
Well, you got where you wanted to go but it took some effort...
Once you connect a few more ESP's you get more experienced, so it will go a bit smoother, we've all been there and done that
Once you connect a few more ESP's you get more experienced, so it will go a bit smoother, we've all been there and done that
- 19 Apr 2024, 20:18
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 783
Re: Which Bin for flashing ESP32-C3 ETH01 evo
Does your browser automatically use https protocol, instead of http ? as https is not (yet) supported by ESPEasy. Euhm, why is port 80..87 blocked on your device? The webserver is available at port 80. Looks like you have some security software running (might be anti-virus or anti-hacking software) ...
- 19 Apr 2024, 15:45
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 783
Re: Which Bin for flashing ESP32-C3 ETH01 evo
How did you upload the binary to the ETH unit, via the Web Flasher or via the Espressif Flash Download tool?
- 18 Apr 2024, 23:15
- Forum: ESP Easy: Software
- Topic: Monitoring health of ESP nodes within rules
- Replies: 13
- Views: 298
- 18 Apr 2024, 22:26
- Forum: ESP Easy: Software
- Topic: Missing DEBUG Option for Weblog
- Replies: 5
- Views: 124
Re: Missing DEBUG Option for Weblog
I use the Serial plugin. It was useful to see what was sent or received.. to my board .. I assume that's the Serial Server plugin? P020/P044 (Serial Proxy P087 is not included in the Normal builds) AFAICS, that plugin doesn't log the incoming data separately, but you can see most data logged at INF...
- 18 Apr 2024, 21:28
- Forum: ESP Easy: Software
- Topic: Missing DEBUG Option for Weblog
- Replies: 5
- Views: 124
Re: Missing DEBUG Option for Weblog
The debug logging has been disabled for ESP8266 Normal builds for a couple of months.
What debug log would you want to see? As not much information in that log level is usable for non-developers
What debug log would you want to see? As not much information in that log level is usable for non-developers
- 18 Apr 2024, 20:47
- Forum: ESP Easy: Software
- Topic: Monitoring health of ESP nodes within rules
- Replies: 13
- Views: 298
Re: Monitoring health of ESP nodes within rules
You can not get the JSON output from rules from the same ESP, and you can't process the resulting (large) json-text.jgrad wrote: ↑18 Apr 2024, 20:32 Values are available in response to http://localhost/json but I dont know how to get this response and parse it within rules.
We'll try to add the functions.
- 18 Apr 2024, 20:44
- Forum: ESP Easy: Software
- Topic: Missing DEBUG Option for Weblog
- Replies: 5
- Views: 124
Re: Missing DEBUG Option for Weblog
What exact build have you installed?
- 18 Apr 2024, 14:59
- Forum: ESP Easy: Hardware
- Topic: LILYGO T4-S3 ESP32-S3
- Replies: 8
- Views: 228
Re: LILYGO T4-S3 ESP32-S3
One more question: how could I get an information that somebody answers on my question, is there a switch in the settings? If you go to your User Control Panel (dropdown menu top-right, next to your username), Select 'Board Preferences', then 'Edit notification options', you can determine what noti...
- 18 Apr 2024, 11:06
- Forum: ESP Easy: Hardware
- Topic: LILYGO T4-S3 ESP32-S3
- Replies: 8
- Views: 228
Re: LILYGO T4-S3 ESP32-S3
What version of that board do you have in mind? There are a couple of different versions, also quite different in price ( $30,- .. $75,- ) ... :o At the moment the display controller in those boards isn't supported (it's not using 'standard' SPI but a 4 or 8 bit parallel connection), but there has b...
- 17 Apr 2024, 20:09
- Forum: ESP Easy: Projects / Applications
- Topic: YALP (yet another LoRa/LoRaWAN project)
- Replies: 5
- Views: 183
Re: YALP (yet another LoRa/LoRaWAN project)
That's a great project, and all the implementation details, and decisions you made, make it a very inspiring read. Thanks!
- 14 Apr 2024, 16:20
- Forum: ESP Easy: Projects / Applications
- Topic: Counting time, calculate and display?
- Replies: 147
- Views: 3880
- 14 Apr 2024, 13:59
- Forum: ESP Easy: Projects / Applications
- Topic: Counting time, calculate and display?
- Replies: 147
- Views: 3880
Re: Counting time, calculate and display?
What exact build are your ESP32-S3 running? If not on the build from https://td-er.nl/espeasy/latest (20240412 or later) you may have issues caused by wonky USBCDC software, that's finally fixed in the latest build (is merged yesterday into "mega")
- 13 Apr 2024, 13:49
- Forum: ESP Easy: Projects / Applications
- Topic: Counting time, calculate and display?
- Replies: 147
- Views: 3880
Re: Counting time, calculate and display?
I'm going to get some sleep. When you're over 60, a day like this is a bit tiring... I can confirm that ;) While you're at it, maybe you can also take a short look at the display-sleep issue. Possibly it's just a small thing why this option is ignored... This part is of bigger importance IMHO, and ...
- 13 Apr 2024, 13:43
- Forum: ESP Easy: Software
- Topic: Which Bin for flashing ESP32-C3 ETH01 evo
- Replies: 36
- Views: 783
Re: Which Bin for flashing ESP32-C3 ETH01 evo
Was considering: why are there not so many GPIO-pins available on this board? See the picture above. The ESP32-C3 doesn't have that many GPIO pins, and a couple are directly wired to the Ethernet chip it seems (they are partly for SPI, so these could have been external as well for other SPI devices...
- 12 Apr 2024, 21:53
- Forum: ESP Easy: Hardware
- Topic: [SOLVED] pb ESP32 + W5500 lite
- Replies: 19
- Views: 569
Re: pb ESP32 + W5500 lite
That version is not in list of the above link... :? So I think your answer should be No. yes it is: Screenshot - 12-04-2024 , 21_22_25.png I want to use that pcb to read the Eastron SDM630M But that plugin isn't included in the Custom build. Getting that PR local in VSCode, you're able to create a ...
- 12 Apr 2024, 20:53
- Forum: ESP Easy: Software
- Topic: Sonoff MS01 value
- Replies: 3
- Views: 107
Re: Sonoff MS01 value
It looks like ESPEasy provides the raw measurement value indeed, but looking at the Tasmota code, where the ESPEasy code is based on, they don't provide a temperature value but 0. Don't know why the raw value is provided here, but I suggest to ignore it, as it isn't useful. The humidity is calculate...
- 12 Apr 2024, 20:28
- Forum: ESP Easy: Hardware
- Topic: [SOLVED] pb ESP32 + W5500 lite
- Replies: 19
- Views: 569
- 12 Apr 2024, 08:43
- Forum: ESP Easy: Software
- Topic: NeoPixel Matrix doesn't work correctly
- Replies: 29
- Views: 644
Re: NeoPixel Matrix doesn't work correctly
After installing the level converter, the main problem went away, only periodically appearing colored artifacts remained throughout the field. Great. Those odd artifacts may be caused by general timing issues of the S2, as said, that's not the most stable ESP32 chip :? It is also not clear why ther...
- 12 Apr 2024, 08:21
- Forum: ESP Easy: Software
- Topic: NeoPixel Matrix doesn't work correctly
- Replies: 29
- Views: 644
Re: NeoPixel Matrix doesn't work correctly
With that configuration it should work as intended, so it probably comes down to some technical (or timing) issue. NB: With this configuration, rotating the display by 90 degrees, can be done by setting "Matrix start-pixel" to "Top/Right", and Rows/Columns mode to "Columns&q...