Search found 3563 matches
- 14 May 2024, 15:08
- Forum: ESP Easy: Software
- Topic: Publishing Environment - 1-Wire Temperature Statistics
- Replies: 12
- Views: 239
Re: Publishing Environment - 1-Wire Temperature Statistics
Great, thanks for the feedback
- 14 May 2024, 12:46
- Forum: ESP Easy: Software
- Topic: Publishing Environment - 1-Wire Temperature Statistics
- Replies: 12
- Views: 239
Re: Publishing Environment - 1-Wire Temperature Statistics
I was able to fix it sooner than expected, so a GH Actions run is on its way.
Please update and retest.
Please update and retest.
- 14 May 2024, 09:51
- Forum: ESP Easy: Projects / Applications
- Topic: Moisture Sensor from BeFlE
- Replies: 40
- Views: 6112
Re: Moisture Sensor from BeFlE
I2C Scan should at least list the address, the device names may be excluded, not sure if these names are included in the Custom build. You can enter the found address in the I2C Address field, but I assume you already tried that. Adding a 10k pull-up to 3V3 on both SDA/SCL should fix the pull-up sta...
- 14 May 2024, 09:03
- Forum: ESP Easy: Software
- Topic: Publishing Environment - 1-Wire Temperature Statistics
- Replies: 12
- Views: 239
Re: Publishing Environment - 1-Wire Temperature Statistics
Hm, I now see where I made a typo (actually, a copy/paste error)
Will be able to fix that later today, not near my ESPEasy development system ATM.
Will be able to fix that later today, not near my ESPEasy development system ATM.
- 14 May 2024, 08:38
- Forum: ESP Easy: Projects / Applications
- Topic: Moisture Sensor from BeFlE
- Replies: 40
- Views: 6112
Re: Moisture Sensor from BeFlE
A few questions: - How long are the wires to your sensor? - Do you have pull-up resistors installed on the SDA and SCL lines? - You didn't swap the SDA and SCL wires? (no harm, but won't work) - Was the sensor used by someone else before you got it, and reprogrammed it to I2C Address 0x01? - I assum...
- 14 May 2024, 08:29
- Forum: ESP Easy: Software
- Topic: Publishing Environment - 1-Wire Temperature Statistics
- Replies: 12
- Views: 239
Re: Publishing Environment - 1-Wire Temperature Statistics
Ah nope, saw what Ton did: https://github.com/letscontrolit/ESPEasy/pull/5051 A bit strange to use a comma here, as we don't do that anywhere else. Why not a dot, Ton? Well, I did that also in other plugins, like P011 and P087, and in AdafruitGFX_Helper (for all supported Display plugins P095, P096...
- 13 May 2024, 20:57
- Forum: ESP Easy: Projects / Applications
- Topic: Moisture Sensor from BeFlE
- Replies: 40
- Views: 6112
Re: Moisture Sensor from BeFlE
Here's a Custom build with the new P047 - Environment - Soil moisture sensor with support for the BeFlE v3.x hardware
- 13 May 2024, 14:02
- Forum: ESP Easy: General Discussion
- Topic: accuracy dht22 sensor
- Replies: 4
- Views: 80
Re: accuracy dht22 sensor
That plugin has the plugin statistics enabled, but that entire feature is disabled for the Collection, Minimal and 1M (like the ESP01S) builds (and other 'bin-size limited' ESP8266 builds)... :shock: When buying new ESP's go for an ESP32 (dual-core, stable workhorse), ESP32-S3 (dual-core, many GPIO'...
- 13 May 2024, 10:59
- Forum: ESP Easy: Projects / Applications
- Topic: Moisture Sensor from BeFlE
- Replies: 40
- Views: 6112
Re: Moisture Sensor from BeFlE
What MQTT Controller?
- 13 May 2024, 09:49
- Forum: ESP Easy: Projects / Applications
- Topic: Moisture Sensor from BeFlE
- Replies: 40
- Views: 6112
Re: Moisture Sensor from BeFlE
Ah, that's because of the limitations for binary size, then the later added sensors (Adafruit and the new BeFlE v3) are excluded :o I'll create a custom build for you, and upload it here later today (I'm not near my ESPEasy development system ATM :?) Are there other plugins required for your build t...
- 13 May 2024, 08:27
- Forum: ESP Easy: General Discussion
- Topic: accuracy dht22 sensor
- Replies: 4
- Views: 80
Re: accuracy dht22 sensor
According to this page the DHT22 should be quite OK, but maybe it suffers condensation where it is currently located, and is disturbed by that. Reading that list above, it seems the ATH20 is a better choice, as it has a range of 0..100%RH, where the DHT22 only allows 5..95%RH In another story I read...
- 11 May 2024, 21:01
- Forum: ESP Easy: Software
- Topic: Publishing Environment - 1-Wire Temperature Statistics
- Replies: 12
- Views: 239
Re: Publishing Environment - 1-Wire Temperature Statistics
@antro31 I've added added PR #5051 to the ESPEasy repository to add this functionality. The binaries will be available from this GH Actions run.
Can you test and report your findings here?
Can you test and report your findings here?
- 10 May 2024, 22:31
- Forum: ESP Easy: General Discussion
- Topic: One button code lock
- Replies: 57
- Views: 34633
Re: One button code lock
@Dick60 I've added a PR that should resolve your issues, it adds an event <taskname>#Address,<state>[,<address_high>,<address_low>] when the new option Event with iButton address is enabled and the Device Address is set to None. A test-build can be obtained from this GH Actions run Please report you...
- 09 May 2024, 17:46
- Forum: ESP Easy: Projects / Applications
- Topic: Moisture Sensor from BeFlE
- Replies: 40
- Views: 6112
Re: Moisture Sensor from BeFlE
I've created pull request #5049 to add support for the new BeFlE v3.x hardware, based on the updated code in the BeFlE SoMoSe repository @sptotal I haven't planned to order the new sensor, but I assume you are ordering one. Can you test the code from the PR on the actual hardware? Download binaries ...
- 08 May 2024, 21:12
- Forum: ESP Easy: Hardware
- Topic: HX711
- Replies: 12
- Views: 242
Re: HX711
Well, the value read from the board is an int32 (32 bit integer), that can hold a max value between -2147483648 and +2147483647, so you're not yet close to that limit. The value read from this sensor should be seen as a relative value, and as you have proven, is (mostly) related to the board, not so...
- 08 May 2024, 17:09
- Forum: ESP Easy: Hardware
- Topic: HX711
- Replies: 12
- Views: 242
Re: HX711
You mean calibrate from raw value to real units or something else ? I just compare now raw value bettwen two identical constructions. Yes, as said, the analog voltages can be very low, so amplification has to be high to get measurable values with enough resolution, so calibration is required to mat...
- 08 May 2024, 11:47
- Forum: ESP Easy: Hardware
- Topic: HX711
- Replies: 12
- Views: 242
Re: HX711
Problem is new HX711+D1. But i try 10pcs of hx711 and still overlimit Ok, reduced to a hardware/board issue, that's unfortunate, but not much ESPEasy can do about that :? Edit: NB: You always have to calibrate the board and the sensor using real world weights, as there are analog parts involved, th...
- 08 May 2024, 11:06
- Forum: ESP Easy: Hardware
- Topic: HX711
- Replies: 12
- Views: 242
Re: HX711
Have you checked your wiring? Don't make that too long, (triple)check the soldering/connections, the sensor-side is really low voltages, so quite sensitive to external influences.
- 07 May 2024, 10:32
- Forum: ESP Easy: Projects / Applications
- Topic: Moisture Sensor from BeFlE
- Replies: 40
- Views: 6112
Re: Moisture Sensor from BeFlE
We're not using the library from BeFlE, (and looking at that code makes me really unhappy, seeing f.e. the inconsistent method naming and the many spelling errors :(). When will that sensor be available? as it looks best & easiest to me to have it added as a new/extra model to the plugin, and in...
- 04 May 2024, 21:35
- Forum: ESP Easy: Hardware
- Topic: Switch to other ESP what do you Prefer?
- Replies: 8
- Views: 280
Re: Switch to other ESP what do you Prefer?
I found only 1 Failure in the actual Firmware but i dont know if this is for every S2 version. In the "Hardware" section of the ESPEasy FW the LED is not GPIO-4 (D4) it is GPIO-15 (D?). A couple of issues here: The manufacturer can decide to provide a LED on any GPIO they desire. The GPIO...
- 04 May 2024, 19:05
- Forum: Experimental
- Topic: ESP32-PHY RL8201FI Receive Problem
- Replies: 2
- Views: 76
Re: ESP32-PHY RL8201FI Receive Problem
Are you running ESPEasy on your board, or 'plain' Arduino, or IDF?
- 03 May 2024, 19:08
- Forum: ESP Easy: Software
- Topic: "command unknown" on publish rule?
- Replies: 2
- Views: 112
Re: "command unknown" on publish rule?
Your MQTT broker is returning a 'Relay....' command to your unit, when you publish to the Relay topic.
This implies your configuration issue is in the MQTT broker, not on the ESPEasy side. ESPEasy doesn't have a 'relay' command, AFAIK.
This implies your configuration issue is in the MQTT broker, not on the ESPEasy side. ESPEasy doesn't have a 'relay' command, AFAIK.
- 03 May 2024, 10:44
- Forum: ESP Easy: General Discussion
- Topic: RCSwitch compilation
- Replies: 22
- Views: 6458
- 02 May 2024, 21:25
- Forum: ESP Easy: Hardware
- Topic: Switch to other ESP what do you Prefer?
- Replies: 8
- Views: 280
Re: Switch to other ESP what do you Prefer?
As usual in IT, "It depends" :lol: - ESP8266: Skip that, as it's (IMHO) outdated, and really limited, in both RAM and max. bin size (The amount of work to make ESPEasy fit is increasing with every useful feature we try to add) - ESP32 (Classic): Fine for most tasks, great if you need Ether...
- 01 May 2024, 23:26
- Forum: ESP Easy: Software
- Topic: Add new sensor (Adafruit STEMMA Soil Sensor - I2C)
- Replies: 7
- Views: 2342
Re: Add new sensor (Adafruit STEMMA Soil Sensor - I2C)
@knighToFdemonS The PR has been merged, and will be in the next ESPEasy release.
- 01 May 2024, 23:25
- Forum: ESP Easy: General Discussion
- Topic: Plugin 64, APDS 9960, which "Collection"?
- Replies: 17
- Views: 2696
Re: Plugin 64, APDS 9960, which "Collection"?
@oisisi The PR has been merged, and will be in the next ESPEasy release.
I originally started working on ESPEasy code, because of the poor configurability of this plugin... most likely you need to tweak the settings, indeed
I originally started working on ESPEasy code, because of the poor configurability of this plugin... most likely you need to tweak the settings, indeed
- 01 May 2024, 23:23
- Forum: ESP Easy: Software
- Topic: Monitoring health of ESP nodes within rules
- Replies: 15
- Views: 893
Re: Monitoring health of ESP nodes within rules
@jgrad The PR has been merged, and will be in the next ESPEasy release.
It also now has the added feature of sending events for P2P Nodes when they 'join' or get 'out of sight', for you to respond on.
It also now has the added feature of sending events for P2P Nodes when they 'join' or get 'out of sight', for you to respond on.
- 01 May 2024, 23:20
- Forum: ESP Easy: General Discussion
- Topic: Missing "Notifications" tab in Custom build
- Replies: 10
- Views: 1194
Re: Missing "Notifications" tab in Custom build
@damiak The PR has been merged, and will be in the next ESPEasy release.
- 30 Apr 2024, 22:24
- Forum: ESP Easy: Software
- Topic: I2C Multiplexer (TCA9548A) Reset Pin
- Replies: 3
- Views: 143
Re: I2C Multiplexer (TCA9548A) Reset Pin
Thats why I was asking how the reset-pin works in ESPEasy and about the "try to clear i2c bus if stuck" option. Currently iam trying to have this option disabled and see what ESPEasy will do in case of a bad sensor. I can see the "clearing i2c stack..." in the log but it pops up...
- 30 Apr 2024, 20:02
- Forum: ESP Easy: Software
- Topic: I2C Multiplexer (TCA9548A) Reset Pin
- Replies: 3
- Views: 143
Re: I2C Multiplexer (TCA9548A) Reset Pin
Any particular device you use that requires this? As the only I2C sensors I know that are causing I2C bus-issues are the ATH10 & AHT15 temperature/humidity sensors, but those are of mediocre quality anyway, out of production by the original manufacturer, and have properly working replacements in...
- 29 Apr 2024, 21:03
- Forum: ESP Easy: Software
- Topic: Publishing Environment - 1-Wire Temperature Statistics
- Replies: 12
- Views: 239
- 29 Apr 2024, 20:15
- Forum: ESP Easy: Software
- Topic: Publishing Environment - 1-Wire Temperature Statistics
- Replies: 12
- Views: 239
Re: Publishing Environment - 1-Wire Temperature Statistics
This data is currently not available, other than via the web UI. It can however be made available, after a little coding effort
I'll see if that can be added without adding too much code, as this plugin is included in many builds, and some are really cramped for binary size issues
I'll see if that can be added without adding too much code, as this plugin is included in many builds, and some are really cramped for binary size issues
- 29 Apr 2024, 15:54
- Forum: ESP Easy: Software
- Topic: Problem with Dummy and rule for average value
- Replies: 8
- Views: 196
Re: Problem with Dummy and rule for average value
The actually esp2688 is still build in a small housing, to change the hardware, I think I have to build a new housing. The smallest ESP32 I own are the same size and pinout as an ESP01S (using an ESP32-C3 ), so 'quite small'... a little larger are these C3/S3 units , still smaller than a Wemos D1 o...
- 29 Apr 2024, 11:41
- Forum: ESP Easy: Software
- Topic: NeoPixel-038 not working on ESP32s3 zero or mini boards
- Replies: 12
- Views: 353
Re: NeoPixel-038 not working on ESP32s3 zero or mini boards
Can you test using the neopixel, with LittleFS enabled, build I mentioned before? That uses the latest IDF 5.1 framework, that solves many issues still present in the IDF 4.4 used by non-LittleFS ESP32* builds.
- 29 Apr 2024, 10:50
- Forum: ESP Easy: Software
- Topic: NeoPixel-038 not working on ESP32s3 zero or mini boards
- Replies: 12
- Views: 353
Re: NeoPixel-038 not working on ESP32s3 zero or mini boards
The neopixel_ESP32s3_4M316k_LittleFS_CDC build should do the trick here. Be aware that the storage is not migrated from the default SPIFFS to LittleFS, so while you can do an in-place upgrade, then all configuration (except WiFi) will be gone! Or just grab an unused board, then you'll loose nothing ;)
- 29 Apr 2024, 10:46
- Forum: ESP Easy: Software
- Topic: Problem with Dummy and rule for average value
- Replies: 8
- Views: 196
Re: Problem with Dummy and rule for average value
Well, the simplest way to get that going is to use an ESP32 Collection B build (or MAX if you have an ESP32 with 16 MB Flash).
AFAICS, the Custom ESP8266 builds currently also get LIMIT_BUILD_SIZE set, causing the statistics/graphs options to be excluded
AFAICS, the Custom ESP8266 builds currently also get LIMIT_BUILD_SIZE set, causing the statistics/graphs options to be excluded
- 29 Apr 2024, 09:57
- Forum: ESP Easy: Software
- Topic: Problem with Dummy and rule for average value
- Replies: 8
- Views: 196
Re: Problem with Dummy and rule for average value
The build you're using doesn't include the statistics collection, so no average values are available (it's missing the checkboxes to enable that for the Values)
- 28 Apr 2024, 17:44
- Forum: ESP Easy: Projects / Applications
- Topic: Air Quality unit - which devices are best?
- Replies: 75
- Views: 6317
Re: Air Quality unit - which devices are best?
Definitely! And as soon as you jumped in, it was a little Apple marketing like: „it just works”. 😉 Thanks again to everyone involved! Thanks for the compliments 8-) Well, now I could think about a PCB to make it nice and neat. 🤔 No idea if more people would be interested, but maybe wrap it up this ...
- 28 Apr 2024, 17:03
- Forum: ESP Easy: Projects / Applications
- Topic: Air Quality unit - which devices are best?
- Replies: 75
- Views: 6317
Re: Air Quality unit - which devices are best?
So this turns out to be a successful project
- 28 Apr 2024, 16:59
- Forum: ESP Easy: Software
- Topic: NeoPixel-038 not working on ESP32s3 zero or mini boards
- Replies: 12
- Views: 353
Re: NeoPixel-038 not working on ESP32s3 zero or mini boards
What GPIO pin are you using, and does your board have PSRAM on-board? (H4R2 indicates it has 2MB PSRAM, so pins 26..32 should not be used, and also, there is a warning about using ADC2 pins)
- 28 Apr 2024, 15:16
- Forum: ESP Easy: Software
- Topic: NeoPixel-038 not working on ESP32s3 zero or mini boards
- Replies: 12
- Views: 353
Re: NeoPixel-038 not working on ESP32s3 zero or mini boards
A few check questions:
- Is your NeoPixel powered at 5V?
- Do you have a 3.3V/5V level converter installed between the ESP and NeoPixel?
- Is your NeoPixel powered at 5V?
- Do you have a 3.3V/5V level converter installed between the ESP and NeoPixel?
- 27 Apr 2024, 22:03
- Forum: ESP Easy: Projects / Applications
- Topic: Air Quality unit - which devices are best?
- Replies: 75
- Views: 6317
Re: Air Quality unit - which devices are best?
Here is ESP Room SmartMonitor V3. This design may give you a reference. https://www.pcbway.com/project/shareproject/ESP_Room_SmartMonitor_V3_8a9e5a39.html It uses DHT22 (Temperature and humidity sensor) and BH1750 light sensor. For dust sensor, you can use PMSx003 modules. https://espeasy.readthedo...
- 27 Apr 2024, 14:56
- Forum: ESP Easy: Software
- Topic: P2P reliability
- Replies: 23
- Views: 979
- 27 Apr 2024, 11:39
- Forum: ESP Easy: Software
- Topic: P2P reliability
- Replies: 23
- Views: 979
Re: P2P reliability
And having "SendToHTTP wait for ack" enabled will cause similar slowdowns with poor WiFi connections.
- 26 Apr 2024, 16:37
- Forum: ESP Easy: General Discussion
- Topic: Divetens Value one one MAX7219 Display
- Replies: 2
- Views: 319
Re: Divetens Value one one MAX7219 Display
Something like this: on system#boot do LoopTimerSet,1,5 // Perpetual repeating timer endon on rules#timer=1 do let,1,%v1%+1 if %v1% > 4 let,1,1 endif if %v1%=1 DotMatrix,txt,1,"Value1: [MQTT#Value1]" elseif %v1%=2 DotMatrix,txt,1,"Out 2: [MQTT#Value2]" elseif %v1%=3 DotMatrix,txt...
- 26 Apr 2024, 08:59
- Forum: ESP Easy: Software
- Topic: P2P reliability
- Replies: 23
- Views: 979
Re: P2P reliability
It seems that those who use p2p a lot care little about the reliability of the parameters used. Well, we seem to differ in opinion on that then, but that's no problem. Using the P2P connected sensors without issues for a long time, and actively developing on ESPEasy, so if there would have been an ...
- 25 Apr 2024, 22:55
- Forum: ESP Easy: Software
- Topic: Add new sensor (Ambient Light Sensor - VEML6030)
- Replies: 8
- Views: 494
Re: Add new sensor (Ambient Light Sensor - VEML6030)
We already have 3 Light/Lux sensors supported, P010 - BH1750, P015 - TSL2561 and P074 - TSL2591. Only P015 has RTD documentation available, and P010 has the old Wiki docs available. They don't have a max. lux range comparable to the VEML6030/VEML7700 but are fine sensors, and are available in nearly...
- 25 Apr 2024, 21:41
- Forum: ESP Easy: Software
- Topic: IMPROVDEBUG:_168_(invalid) in log
- Replies: 7
- Views: 522
Re: IMPROVDEBUG:_168_(invalid) in log
Are you working on a new plugin with ID P168? As I'm about to assign a number to another planned plugin, but if you are already using that I can also register yours and select the next ID to my planned plugin. Just provide a name and purpose for your plugin.
- 25 Apr 2024, 11:09
- Forum: ESP Easy: General Discussion
- Topic: moving from domoticz to HA
- Replies: 3
- Views: 464
Re: moving from domoticz to HA
ESPEasy supports only 1 MQTT controller to be active at 1 time for sending out data (the first one is used). Simplest alternative is to switch your sensors sending all data to Domoticz from rules, so the Domoticz controller can be disabled, then configure HA Controller configuration during the trans...
- 25 Apr 2024, 11:04
- Forum: ESP Easy: Software
- Topic: Add new sensor (Ambient Light Sensor - VEML6030)
- Replies: 8
- Views: 494
Re: Add new sensor (Ambient Light Sensor - VEML6030)
Ah, I got the impression you could calculate the lux from available values, but that's not the case. I've ordered a VEML7700, that appears to be compatible in lux range with the VEML6030 but is quite a bit cheaper :?, and have to check specs if they are also (fully) software-compatible. Any reason f...