Search found 16 matches
- 14 Nov 2019, 10:36
- Forum: ESP Easy: General Discussion
- Topic: Interference problem with multiple devices
- Replies: 6
- Views: 5245
Re: Interference problem with multiple devices
This is a old topic but I have same sort of problem. It seems that the touch (pogo pin) interference with OpenHAB MQTT Protocal. It sounds so crazy but When MQTT is enabled my pogo pin react on nothing (in rules when touch is 1 then turn led to green) and I see lots of green and red leds over the da...
- 10 Nov 2019, 14:31
- Forum: ESP Easy: General Discussion
- Topic: Dummy Device MQTT
- Replies: 3
- Views: 6736
Re: Dummy Device MQTT
Thanks. I read but im new with this command. Do I add this in rules as well. Sorry for asking.
Set interval to 0 is not possible, then it goes back to 60
Set interval to 0 is not possible, then it goes back to 60
- 10 Nov 2019, 12:46
- Forum: ESP Easy: General Discussion
- Topic: Dummy Device MQTT
- Replies: 3
- Views: 6736
Dummy Device MQTT
Hi All, I have couple of MEEK switches. Switch work perfect. Also the touch task is working (switch input - switch gpio-12) I have add this one in Home Asssistant: switch: - platform: mqtt command_topic: "homeassistant/MeekBathroom/Touch/Button/cmd" state_topic: "homeassistant/MeekBat...
- 09 Nov 2019, 17:12
- Forum: ESP Easy: General Discussion
- Topic: OpenHAB MQTT not working
- Replies: 4
- Views: 6672
Re: OpenHAB MQTT not working
THANKS !!!! That did the job !!!!
- 09 Nov 2019, 15:22
- Forum: ESP Easy: General Discussion
- Topic: OpenHAB MQTT not working
- Replies: 4
- Views: 6672
OpenHAB MQTT not working
Hi All, I have 2 ESP modules. 1 is working perfect with follow Piublish line in the RULE. Publish milight/0xAAAE/rgb_cct/0,{"state":"ON", "brightness": 255} Build 20102 - Mega Libraries ESP82xx Core 2_4_1, NONOS SDK 2.2.1(cfd48f3), LWIP: 2.0.3 Bit now i have a second on...
- 05 Mar 2018, 08:47
- Forum: RFLink: Nederlands support forum
- Topic: RFlink - MiLight - Kelvin en Brightness
- Replies: 3
- Views: 12508
Re: RFlink - MiLight - Kelvin en Brightness
Ze zijn bezig binnen Domoticz om diverse opties te verbeteren. Ik zie dat dit ook effect heeft op de MiLight lampen. Ik ga snel eens kijken of ik mijn lampen die door RFlink worden herkend te kunnen bedienen. Echter merkte ik al eens op dat ze dan als RGB worden gezien en niet als RGBW waardoor Kelv...
- 09 Feb 2018, 16:50
- Forum: RFlink: General Discussions
- Topic: MiLight Brightness and Domoticz
- Replies: 2
- Views: 3817
- 28 Jan 2018, 19:01
- Forum: RFlink: General Discussions
- Topic: MiLight Brightness and Domoticz
- Replies: 2
- Views: 3817
MiLight Brightness and Domoticz
Hi ALl, Im trying to find out why brightness is not working correct in Domoticz. I found this: I see a difference between the commands that sends by Milight App (iOS) and what RFlink receives and the commands that been send by Domoticz for brightness MiLIght App: 10;MiLightv1;20f504;01;c0094;BRIGHT ...
- 27 Jan 2018, 17:46
- Forum: RFLink: Nederlands support forum
- Topic: RFlink - MiLight - Kelvin en Brightness
- Replies: 3
- Views: 12508
RFlink - MiLight - Kelvin en Brightness
Hoi Allemaal, Kan iemand mij wellicht vertellen of het wel of niet hoort te werken: RFlink met een NRF24L01 in combinatie met Milight lampen in Domoticz geconfigureerd zoals beschreven op de RFlink website Lampen netjes op dimmer gezet. Nu wil ik een scene maken waarbij de lampen gedimt moeten worde...
- 24 Jan 2018, 10:58
- Forum: RFlink: General Discussions
- Topic: RFLink with NRF24L01+ change bitrate
- Replies: 3
- Views: 4358
- 20 Jan 2018, 14:43
- Forum: RFlink: General Discussions
- Topic: RFLink with NRF24L01+ change bitrate
- Replies: 3
- Views: 4358
Re: RFLink with NRF24L01+ change bitrate
I read this topic. I use now 6 bulbs to test Milight with RFlink and NRF24L01+ module. When i turn them on in a group scene in domoticz everything going well. When i turn them off sometimes it skip a bulb randomly. I see that RFlink send all the commands serial but the sometimes the bulb does't rece...
- 19 Jan 2018, 19:24
- Forum: RFLink: Nederlands support forum
- Topic: NRF24L01 and RFlink sending commands
- Replies: 0
- Views: 9607
NRF24L01 and RFlink sending commands
Hi All, Ik ben nu druk bezig met wat tests on mijn Milight lampen direct vanuit Domoticz aan te sturen. Nu 6 lampen toegevoegd om te testen. Alle lampen onafhankelijk in domoticz gezet. Group aangemaakt zodat ik een aan/uit command kan geven. Commando om ze aan te zetten gaat goed, alle lampen gaan ...
- 14 Jan 2018, 15:40
- Forum: RFLink: Nederlands support forum
- Topic: NRF24L01 - MiLight
- Replies: 6
- Views: 15424
Re: NRF24L01 - MiLight
Je kiest zelf de ID.. In je voorbeeld: 20;17;MiLightv1;ID=5A8294;SWITCH=01;RGB=8690;CMD=ON; is de waarde 8294 instelbaar tussen 0000 en FFFF (dit is een hexadecimaal getal) Switch is een waarde 1/2/3/4 (gelijk aan de zone) en 0 voor alle 4 de zones. Wil je 28 lampen.. dan kan je bv ID 8290, 8291, 8...
- 13 Jan 2018, 12:01
- Forum: RFLink: Nederlands support forum
- Topic: NRF24L01 - MiLight
- Replies: 6
- Views: 15424
Re: NRF24L01 - MiLight
Je kiest zelf de ID.. In je voorbeeld: 20;17;MiLightv1;ID=5A8294;SWITCH=01;RGB=8690;CMD=ON; is de waarde 8294 instelbaar tussen 0000 en FFFF (dit is een hexadecimaal getal) Switch is een waarde 1/2/3/4 (gelijk aan de zone) en 0 voor alle 4 de zones. Wil je 28 lampen.. dan kan je bv ID 8290, 8291, 8...
- 12 Jan 2018, 23:16
- Forum: RFLink: Nederlands support forum
- Topic: NRF24L01 - MiLight
- Replies: 6
- Views: 15424
Re: NRF24L01 - MiLight
Een milight controller heeft 1 adres met 4 zones... bij 2 controllers kan je dan 8 lampen individueel aansturen. RFLink heeft een vrij toe te wijzen adres en 4 zones. Je kan met 1 RFlink daardoor 262140 lampen individueel aansturen. Dank je voor je info. Dit zegt RFlink website. ik maak hierin op d...
- 12 Jan 2018, 11:11
- Forum: RFLink: Nederlands support forum
- Topic: NRF24L01 - MiLight
- Replies: 6
- Views: 15424
NRF24L01 - MiLight
Hoi Allemaal, Ik wil een NRF24L01 gaan gebruiken voor mijn MiLIght lampen. Ik zag in de omschrijving dat ik de zones kan aanpassen van 01 tm 04. Is er een mogelijk om meer zones te gebruiken? Ik heb 3 MiLight Controllers waarbij ik via de MiLight App (iPhone) 2 virtuele controllers zodat ik 2 x 4 zo...